Dial print on my new Pepsi is excellent so looks like they are now using the new dial on all models.
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
Clean new GMT with DD3285 QC pics and video release [finally]
- Thread starter CTime
- Start date
DonkeyHoTay
Cockwomble Misfire Specialist
Wow.... 4 months later and QC is finally here for my rootbeer DD3285. GL immediately - didn't even bother looking at the pictures. At this point they could mail me a bag of crayons and I would just be glad the wait is over.
What if there was no rootbeer colored crayons included. Would you send them back to China
DonkeyHoTay
Cockwomble Misfire Specialist
What if there was no rootbeer colored crayons included. Would you send them back to China
I would just eat all the crayons so there would be nothing to send back.
- 23/6/20
- 222
- 141
- 43
My 126710 BLNR is on his way. It's the V2.
A bit puzzled by people claiming they have CF BLRO v2 when the TD themselves claimed that there is only a v2 of the BLNR ?
Anyway, would be great to see a v1/v2 dial comparison
Anyway, would be great to see a v1/v2 dial comparison
- 23/6/20
- 222
- 141
- 43
It is not the ideal comparison because of the position of the handles and distance of the photo, but on the right we have the original photo of the 126710 BLNR v1 contributed by CTime on this post, and on the left the photo of the v2 sent to me as QC.
- 23/6/20
- 222
- 141
- 43
In the previous message I made a mistake: the position of the reps is as shown in the photo. On the left v1, on the right v2.
”SUPERLATIVE CHRONOMETER” looks wonky af to me on both pics, so I assume that it’s a problem with the pics and not the dial ?
It is not the ideal comparison because of the position of the handles and distance of the photo, but on the right we have the original photo of the 126710 BLNR v1 contributed by CTime on this post, and on the left the photo of the v2 sent to me as QC.
”OFFICIALLY CERTIFIED” wonky af on v1, less on v2 but still not so good..
Or ?
For reference, my v1 BLRO from ctime, the 7th June 2023 batch. No wonkiness whatsoever
Hello guys, my dial on my DD3285 Pepsi does not fit perfectly to the rehaut. I think it’s misaligned about 0,5 degree. Is it possible to move the dial slightly? Do I need to disassemble the hands or is it possible to move the dial slightly without removing the hands? I know that this will affect the date window alignment.
Thanks in advance.
Thanks in advance.
Micro adjustments can be made but it is not healthy for the stem.
Open the caseback and unscrew the movement holder screws, then turn/adjust the dial. Be careful and don't use to much force because you can damage the stem.
I already tried it but It’s not enough. That’s why I was asking myself if it’s possible to move the dial itself on the movement. Attached a picture. Sorry for the bad quality, I hope its good enough…
I would just live with the slightly misaligned rehaut tbh it’s not a massive issue, you’re the only person that will notice it. If you start moving the dial you’re risking the dial, crystal date window, bezel being misaligned etc.I already tried it but It’s not enough. That’s why I was asking myself if it’s possible to move the dial itself on the movement. Attached a picture. Sorry for the bad quality, I hope its good enough…
Thanks for the replies.
Yes, I know and you are right. But is it still possible to move the dial slightly? Everytime I look on the watch I see the misaligned rehaut
- 25/3/17
- 4,309
- 3,802
- 113
the dial of 3285 has no pins and is in a fixed position, it cannot be moved or rotated. The problem is easily solved by moving all the movement. a watchmaker takes 5 minutesThanks for the replies.
Yes, I know and you are right. But is it still possible to move the dial slightly? Everytime I look on the watch I see the misaligned rehaut