Thanks a lot @Hugg727 i will try it also with a cape cod. I already thought that not very much is needed at the rehaut.This is a good list. The rehaut polishing is optional, but I did wipe mine off with a Cape Cod a few times while I had the movement out during the xtal swap. The bezel cleaning is a must if you want decent bezel movement.
Good info in here.....
Tutorial: How to fix the Bezel on a CLEAN GMT Master 2
Hi Guys /// Update 1. May 2024 Second part under this one: Best results with stock parts only Those who follow me a little know that I do reviews from time to time or that I take photos of a build from time to time. This time it's different and I still hope that I can entertain some people...forum.replica-watch.info
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
GMT Master II 126710blnr (Batman) Gen and clean comparison
- Thread starter steve_theonewatches
- Start date
- 16/4/22
- 481
- 545
- 93
I posted up a build of a BLRO that answers some of your questions and shows a polished rehaut w/cape cod here: https://forum.replica-watch.info/th...-video-release-finally.10939641/post-11306548
Hope it helps.
Hope it helps.
Wow, that’s exactly what I needed
thanks a lot, all modifications that I wanted to do, perfectly described.
Flux Capacitor
Do not accept unsolicited offers
I have to agree here. The emotional impact of the investment can't be replicated.
- 4/11/21
- 33
- 7
- 8
- 26/1/21
- 566
- 311
- 63
Received the new CF BLNR w/ Dd3285 movement. Crystal is still pretty low quality as usual with CF. I’d rate it a 6/10
Recommend upgrading the crystal and it’ll be a great watch
Last edited:
I received my CF BLNR DD3285 QC pics from TD, to my eye everything looks good except the dial font, specifically the "superlative chronometer" and "officially certified". Now it could just be the image quality being decreased over WhatsApp so TD is sending me some additional pics but I was hoping for some input. I've looked at a number of CF examples, the ones in this thread and the font looks a lot better on those examples.
Thoughts?
Thoughts?
marcosfisteus
Getting To Know The Place
Incredible comparison with such a level of detail, thank you very much for the post! without having both at the side, the clean factory achieves absolutely spectacular results, they will never be perfect but we have already reached a level that was practically unthinkable years ago...
marcosfisteus
Getting To Know The Place
Incredible comparison with such a level of detail, thank you very much for the post! without having both at the side, the clean factory achieves absolutely spectacular results, they will never be perfect but we have already reached a level that was practically unthinkable years ago...
marcosfisteus
Getting To Know The Place
Incredible comparison with such a level of detail, thank you very much for the post! without having both at the side, the clean factory achieves absolutely spectacular results, they will never be perfect but we have already reached a level that was practically unthinkable years ago...
- 4/11/21
- 33
- 7
- 8
In general the dd3285 is very good. I’ve worked on several of them so far. But I have had one issue with the date finger, but I was able to solve it:
Dogwood's Watchmaking Journey
Over the past few months, I've had many (many!) requests to install Deep crystals onto watches. Deep crystals are a nice upgrade if you're into the "invisible" crystal look. However, there have been several reports of watches failing pressure tests after Deep crystals have been installed. I was...
forum.replica-watch.info
Does anyone know the difference between Gen and the CF gasket width/height difference? I would assume that the gasket height is longer than gen, that's why its more magnified on the CF.
I don't know the exact difference, but it's a lot, i've spent a couple of days sanding down the gasket to gen height. (Gen gasket with a gen crystal, was sitting to low, and the crystal would touch the hands.)
Have a look here: https://forum.replica-watch.info/th...ezel-on-a-clean-gmt-master-2.10668398/page-16
Have a look here: https://forum.replica-watch.info/th...ezel-on-a-clean-gmt-master-2.10668398/page-16
Yeah I sure did. Suck a beautiful watch!Did you see the link
Im curious, are you thinking of getting the V3 version?