The bezel is press fit. The bezel insert is held on with double sided adhesive. I personally remove the bezel fully and reseat it with a press. I think Karbon is suggesting to pull up the insert and then rotate it slightly, but I will let him confirm.
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
Another Moonswatch metal case project
- Thread starter dacodo
- Start date
yes. just insert.
no need to reglue.
it holds by simply placing it in and applying some pressure to relock the glue
no need to reglue.
it holds by simply placing it in and applying some pressure to relock the glue
- 5/11/22
- 191
- 275
- 63
well done on the metal moonswatch! Still love mine - though I'm inspired by the mission to mars variant and really like the engraved casebooks.... so this is inbound now 
I believe for this combo you will need pusher extensions. @Karbon74 glued some scrap material to his, I made 3d printed pusher extenders. Both are valid options.well done on the metal moonswatch! Still love mine - though I'm inspired by the mission to mars variant and really like the engraved casebooks.... so this is inbound now
The third options is 1.5mm heatshrink tubing and solid core wire. Very cheap on AliX, and does not require glue, just scissors and a hair dryer / heat gun.
- 5/11/22
- 191
- 275
- 63
Great idea - I have various electrical bits I can probably find, thanks for the suggestion
Keep us posted, looks greatwell done on the metal moonswatch! Still love mine - though I'm inspired by the mission to mars variant and really like the engraved casebooks.... so this is inbound now
Here's the heatshrink concept for those visually. Heatshrink is a tube that shrinks when heat is applied. It is used for electrical work. Very simple concept. Anyone can do this without a 3d printer, or without glue that can be messy or leave a residue.
I just bought some heatshrink tubes and will find wire. Will test and report on this.Here's the heatshrink concept for those visually. Heatshrink is a tube that shrinks when heat is applied. It is used for electrical work. Very simple concept. Anyone can do this without a 3d printer, or without glue that can be messy or leave a residue.
The glue method works very well but it does need a delicate touch to cut and prepare the tiny adaptor (2x2mm) to the right thickness (1mm), put the glue and then place the adaptor _on_ the movement contacts. All of this while holding the movement in one hand (remember that the dial and hands are on it!). One mistake and you trash it.
These donor Moonswatches arrived today. They are quite a bit better than the ones I got from watches_77 on DHgate last year. These are also from watches_77, I guess an an updated version, no more greenish markers.
Now i’m considering of buying another set to wear unmodded, lol
Now i’m considering of buying another set to wear unmodded, lol
Last edited:
Just ordered the Moonswatch and some tools.
Did the metal cases get more expensive? The ones on AliX are almost 50€.
Or did is remember it incorrectly that they were somewhat about 35€?
And do you guys have any recommendations for an Omega logo bracelet?
Did the metal cases get more expensive? The ones on AliX are almost 50€.
Or did is remember it incorrectly that they were somewhat about 35€?
And do you guys have any recommendations for an Omega logo bracelet?
Not able to edit my post unfortunately but is there any significant difference justifying the price difference in those 2 cases?
Case 1: https://www.aliexpress.us/item/1005...=scene:pcDetailTopMoreOtherSeller|query_from:
Case 2: https://www.aliexpress.us/item/1005005106728295.html?gatewayAdapt=4itemAdapt
If not, I'd order the cheaper one and then I am ready to got for the project.
Just found this amazing item on AliExpress. Check it out! 33,56€ | 20mm 22mm 316L Solid Stainless Steel Watch Band for Omega Speedmaster Seamaster 300 600 Planet Ocean Strap 007 Bracelet Apollo1
the cases vary in price
take Case2Not able to edit my post unfortunately but is there any significant difference justifying the price difference in those 2 cases?
Case 1: https://www.aliexpress.us/item/1005004896746416.html?spm=a2g0o.detail.pcDetailTopMoreOtherSeller.2.1d1aK78sK78sLn&gps-id=pcDetailTopMoreOtherSeller&scm=1007.40000.327270.0&scm_id=1007.40000.327270.0&scm-url=1007.40000.327270.0&pvid=5405e346-715b-48e1-ae49-0ee37685541f&_t=gps-id
Case 2: https://www.aliexpress.us/item/1005005106728295.html?gatewayAdapt=4itemAdapt
If not, I'd order the cheaper one and then I am ready to got for the project.
the case one has short pushers, and you will need to make an adaptor for the chrono to work. Please note that there are at least 5-6 variants of the case. So you might get lucky, or not
