You need to push it out with a needle from the backside of the dial. You just need to identify the correct 2 holes. It's not that difficult.
Putting it back straight and steady with some hypo cement, that's more challenging.
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
V7 will release Ingenieur!
- Thread starter Reaps
- Start date
Putting it back straight and steady with some hypo cement, that's more challenging.
I have spoken to Delugs and they will do it but price is £200+. Having owned a few of their straps I can say the quality would be fantastic, on par with Camille Fournet.
theactualwitcher
Do not accept unsolicited offers
- 15/8/23
- 8
- 8
- 3
Hey guys,
Wanted to ask if anyone of you has seen a comparison of the gen and the v7 aqua models. Specially, I want to know more about how the dials compare.
The black dial looks to be repped very well. But I just wonder if the aqua rep dial is similar enough.
I had a chance to see the gen aqua ingenieur and the dial looked so much better compared to my ixdao. I literally want to sell the ixdao to get the v7 now lol
Thanks
Wanted to ask if anyone of you has seen a comparison of the gen and the v7 aqua models. Specially, I want to know more about how the dials compare.
The black dial looks to be repped very well. But I just wonder if the aqua rep dial is similar enough.
I had a chance to see the gen aqua ingenieur and the dial looked so much better compared to my ixdao. I literally want to sell the ixdao to get the v7 now lol
Thanks
I just bought the gen at the boutique, I will post pics of it next to the v7f rep, but from first glance, the v7f is nwbig unless you have the $.
heres the pics:
forum.replica-watch.info
heres the pics:
V7f ingeniuer gen vs rep
Here's a gen and a rep, two photos to compare lighting (I swapped their positions between photos) if needed, which is gen, which is rep?
forum.replica-watch.info
Last edited:
Thanks and .. they really nailed it with this repI just bought the gen at the boutique, I will post pics of it next to the v7f rep, but from first glance, the v7f is nwbig unless you have the $.
heres the pics:
V7f ingeniuer gen vs rep
Here's a gen and a rep, two photos to compare lighting (I swapped their positions between photos) if needed, which is gen, which is rep?
therepfather
Getting To Know The Place
Look like GH is releasing the Titanium version of it!
Thanks for sharing.
Case looks good, although one picture is not enough to say
Dial and date wheel are inaccurate unfortunately
Case looks good, although one picture is not enough to say
Dial and date wheel are inaccurate unfortunately
I just checked the other pictures.
The bezel profile is not too accurate either. The polished part is slimmer than it should be.
The bezel profile is not too accurate either. The polished part is slimmer than it should be.
Inaccurate crown guard (not tall enough) and bracelet too (first link comes with holes).
I'll pass.
I'll pass.
If one has, you’ve got to think that others will follow. Pretty sure GF released the SS ones first too
ciccio82
Getting To Know The Place
- 6/8/24
- 45
- 45
- 18
Everyone here is dreaming a titanium vs of Ingenieur by V7F 
Sure are. Will definitely get the titanium v7f. Version. I asked Hont about the GH factory version. He said GH factory quality not as good as v7f which we know I guess already.Everyone here is dreaming a titanium vs of Ingenieur by V7F
munichman
Active Member
I finally read through all 69 pages of this thread.
Which took me a week all in all, since I obviously didn´t complete it in one sitting.
In the meantime I´ve bought a black V1.
What are my findings so far?
The three dots underneath the IWC are hardly to be seen on this example.
The three o´clock glitch is either minimal or not existing.
The clasp works fine and there aren´t any signs of weakness yet.
Most of all the bracelet is really well built. It doesn´t have any sharp edges whatsoever and wears really comfortably.
After taking out one link it fits almost perfectly (17,3 cm WRIST).
The movement runs great and has a sufficient reserve, > 24 hrs.
Even though the lug-to-lug is smaller than with my AP 16202 it looks and feels bigger, probably due to the thickness.
Will I keep it?
Not sure yet, since the AP 16202 wears even better and looks smarter IMHO.
Which took me a week all in all, since I obviously didn´t complete it in one sitting.
In the meantime I´ve bought a black V1.
What are my findings so far?
The three dots underneath the IWC are hardly to be seen on this example.
The three o´clock glitch is either minimal or not existing.
The clasp works fine and there aren´t any signs of weakness yet.
Most of all the bracelet is really well built. It doesn´t have any sharp edges whatsoever and wears really comfortably.
After taking out one link it fits almost perfectly (17,3 cm WRIST).
The movement runs great and has a sufficient reserve, > 24 hrs.
Even though the lug-to-lug is smaller than with my AP 16202 it looks and feels bigger, probably due to the thickness.
Will I keep it?
Not sure yet, since the AP 16202 wears even better and looks smarter IMHO.
What factory of ap 16202 do you have? I love this watch and the titbis perfect even on my 6.5 inch wrist. I was unsure on the ap due to it being 39mm and a longer out to lug but you think it wears smaller?I finally read through all 69 pages of this thread.
Which took me a week all in all, since I obviously didn´t complete it in one sitting.
In the meantime I´ve bought a black V1.
What are my findings so far?
The three dots underneath the IWC are hardly to be seen on this example.
The three o´clock glitch is either minimal or not existing.
The clasp works fine and there aren´t any signs of weakness yet.
Most of all the bracelet is really well built. It doesn´t have any sharp edges whatsoever and wears really comfortably.
After taking out one link it fits almost perfectly (17,3 cm WRIST).
The movement runs great and has a sufficient reserve, > 24 hrs.
Even though the lug-to-lug is smaller than with my AP 16202 it looks and feels bigger, probably due to the thickness.
Will I keep it?
Not sure yet, since the AP 16202 wears even better and looks smarter IMHO.
munichman
Active Member
It´s ZF V2.
It wears closer to the wrist, either due to the overall design of case and lugs or due to the fact that the case is thinner than the Ing´s.
The Ing feels somewhat top-heavy, which the AP doesn´t.
That said the bracelet of the Ing is much smoother, since it doesn´t have any sharp edges at all.
This is actually the only real glitch with the AP.
It has sharp edges all over, but at least not on th underside.