Not sue if iwc 32111 caliber has the same dial feet position as eta2892. In any case it would be probably difficult (and expensive too) to get a gen iwc dial.Congrats!
A gen dial wouldn't be bad at all (more for other colors to be honest, black looks very accurate as it is) but I am afraid we would need to cut the dial feet.
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
V7 will release Ingenieur!
- Thread starter Reaps
- Start date
I am afraid the feet are located differently as the manufacturer is not the same (Val Fleurier)
montanari
Known Member
- 5/4/24
- 112
- 177
- 43
NathanEB26
New here !
- 8/8/24
- 40
- 26
- 18
Hi guys
Really beautiful pics here
Do you know how the textured dial, especially the Aqua, compares to gen, notably in the sun ?
Thx
Really beautiful pics here
Do you know how the textured dial, especially the Aqua, compares to gen, notably in the sun ?
Thx
- 26/12/13
- 4,647
- 3,126
- 113
65 pages of fun summer reading, with all the info you need in previous 64 pages. Have fun
Therion666’s advice is correct; you can find many helpful pics in this thread.
But to my recollection, I don’t think any pics of rep and gen aqua dial side-by-side, under the same lighting, have been posted.
- 26/12/13
- 4,647
- 3,126
- 113
Yeah, there are none, if I remember correctly. The factory hasn't provided any side by side pics either. It's a nice color, but I think that the black one is still your safest bet. I see absolutely zero difference to gen, nothing. Especially if you get a perfect unit. Like I did
After seeing some photos of the Aqua on Watchuseek and different review blogs, I don't think that the rep is just there yet, there's something off about it... One should really see them IRL side by side to be able to judge.It is a straight rule that none of the coloured dials can ever be repped correctly by the factories with the right hue.
- 26/12/13
- 4,647
- 3,126
- 113
I don't understand the need to recognize it? Just ask your TD for a V7F and you'll get a V7F. They are called TDs for a reason, don't worry
- 26/12/13
- 4,647
- 3,126
- 113
Well, sometimes mistakes happen to TDs, too. And I'm speaking out of experience.I don't understand the need to recognize it? Just ask your TD for a V7F and you'll get a V7F. They are called TDs for a reason, don't worry
First of all, if it's a V7F it should have the V7F sticker in the back. Then you could open it and have a look at the movement. V7F comes with an A2892 which is easy to spot.
- 25/9/22
- 6,328
- 17,449
- 113
No. GHF is very obvious. Look at the screws and bezel on GH vs V7. Miles apart.
GH FACTORY WILL RELEASE IWC INGENIEUR 40MM
GH’s grand finale in 2023, the new IWC Ingenieur Automatic Watch 40 makes its grand debut. The case and bracelet are multi-level brushed, polished and satin-finished. The bezel is fixed to the case lining through five polygonal screws and adopts a checkerboard dial design. The grid pattern on...
forum.replica-watch.info
montanari
Known Member
- 5/4/24
- 112
- 177
- 43
Jellygolf&watches
Active Member
shomfo_8005
Getting To Know The Place
- 12/7/24
- 37
- 46
- 18
This was also my case, when it first arrived, mine came with V7 sticker at the back, it should look like this
- 26/12/13
- 4,647
- 3,126
- 113
Yeah, this sticker was on both of my V7F Ingenieurs ( black and white dial ). They both also came with a black IWC warranty card and a hangtag for IWC Mark XX LPP I guess that's how you know they're proper V7F 
I guess that's how you know they're proper V7F
Last edited: