• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

The 1016: The Under Appreciated Thread

HSV726

Known Member
Supporter
1/8/10
132
165
43
ok cool, leave it with me I should have some free time this weekend to photograph each set
 
  • Like
Reactions: GenuineFool

GenuineFool

Known Member
Supporter
Certified
only hour hand , 13mm for the rest

I don't think all the minute hands are 13mm. In fact, I think only 1 and 4 in the photo are 13mm. The others look like 12mm or 12.5mm. Even the sweep second hands look like different lengths.

I, for one, would greatly appreciate seeing all the hands photographed next to the ruler, but recognize that is more work than just the hour hands.
 

1016 lover

Active Member
4/10/22
490
823
93
Very nice, great gen angle - was the inside diameter perfectly dimensioned to fit the crystal, or did you need to do a final adaptation? Any chance of a limited production run for those of us wandering the empty desert of good 1016 bezels 😉
I am sur that the job could be done, I am in discussion with a workshop, i will put my progress here for this subject, for the fitting, it's a direct fit.
 
  • Like
Reactions: 1016_idiot_savant

1675lover

Active Member
23/7/22
300
349
63
Comparing with the JMB bezel and some gen pics, the prototype angle looks great but the base is a little thin?
 

1675lover

Active Member
23/7/22
300
349
63
photos from 369mafia and 1016 lover, the base (which i highlighted in that tiny red rectangle below), is kinda thin on the custom 1 by 1016 lover's workshop :/

in fact looking at the extreme left and extreme right, seems like the base is a little uneven. but good work on the sloping angle!
3A4ZEF.jpg
 

1016 lover

Active Member
4/10/22
490
823
93
photos from 369mafia and 1016 lover, the base (which i highlighted in that tiny red rectangle below), is kinda thin on the custom 1 by 1016 lover's workshop :/

in fact looking at the extreme left and extreme right, seems like the base is a little uneven. but good work on the sloping angle!
3A4ZEF.jpg
Yes, there is a problem with this prototype, it's due to the manufacturing, the guy has some difficulty execute the drawing, the outer diameter is 34,2mm but I ask 34.5mm on the drawing, the height is 1.8mm and the drawing quote it at 2mm+-0.05,and the last thing is the angle that shape the base look wrong to me and your right, I asked 90° from the polished face to the base, and it look more prononced, I will post the 3d render of the bezel I have drawn, except for the polished face angle and the height, this bezel Don t valid Wath I have drawn... I receive 2 bezel last week and they were completely wrong, the guy told me he will redo them and I received the one on the picture Friday, but it not really in line with my drawing, I think the guy was not really concern by this little things.

I am in discussion with another workshop, and the guy was more attentive to Wath I need, we discuss with a case and a bezel in hands so he understand that this little thing have to be well done as it is a visual element of the watch, he told me that he will do me two bezel to validate my drawing and we ll see for a larger batch after, but it clearly not his main buisnees so he will do them when he will have time.

We discuss on the case too, for him it's possible to manufacture some, but he told me directly that the price for this thing will be expansive as I ask for 10 to 20... But it's possible, I ve drawn a case for my experiment, I am not 100% sure of the design, as I shape the raffle ones and seeing lot of picture of the real thing, and having a gen 14270 to compare, The shape is not so easy to draw, I can post some render to let you judge of my progress.
 

1675lover

Active Member
23/7/22
300
349
63
The length that folks will go to for reps… good stuff! Looking forward to the next batch of prototypes!

Meanwhile I’m still waiting for my Clark t21. It’s stuck in the US for some reason…
 

1016_idiot_savant

Active Member
Supporter
Certified
3/2/23
481
1,401
93
Denmark
I have been planning on doing a separate thread on it , will probably get to it today
this was my nth attempt and I am finally happy with it but I want to push the limit a bit further to see what I can achie
Very much looking forward to this 👍🙏