• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

Review of Clean Factory New Rep Bezel and Insert for 116610LN (vs. Gen, ARF, Noob and VRF)

shortlegs

Active Member
31/5/19
493
271
63
You're joking right? I mean you've been asking all kinds of funny questions over the last year so you must know all watches have flaws even gens. It's particularly evident if you put them into to a microsope.

Makes you wonder why is he even here on these forums.. So does he not buy gens too? Cos they have flaws too, especially microscopic ones. :headdesk:
 

Curt941

I'm Pretty Popular
26/1/11
2,869
266
83
So from reading the thread, the clean factory bezel and insert will fit directly onto an ARF 116610 and is a solid upgrade?

But looking at Puretime's website, is clean factory not selling the entire bezel assembly anymore? Just the insert?
 
Last edited:

Neo_one

Banned member, the goat does not approve
Banned
19/3/19
184
37
0
Makes you wonder why is he even here on these forums.. So does he not buy gens too? Cos they have flaws too, especially microscopic ones. :headdesk:

I think he's just tired of looking at his microscopic penis ????
 

shortlegs

Active Member
31/5/19
493
271
63
So from reading the thread, the clean factory bezel and insert will fit directly onto an ARF 116610 and is a solid upgrade?

But looking at Puretime's website, is clean factory not selling the entire bezel assembly anymore? Just the insert?

Not sure about the bezel, but the insert fits onto an ARF perfectly. And it's a nice upgrade for sure, only thing is it's a bit too new to tell if it would fade with time or not. Let's hope not.
 

xartan

I'm Pretty Popular
Advisor
30/7/16
2,692
1,055
0
Talk to Li at JTime if you want the whole set. He’s a firend of the maker.
 

Drr80

Renowned Member
12/2/18
515
102
43
El paso, TX
Someone sell me one of these clean assembly bezels.my credit card wont let me use it over seas or buy bit coin.
 

xartan

I'm Pretty Popular
Advisor
30/7/16
2,692
1,055
0
Credit card payment might be a bad idea anyway. Numerous people in the forums have had odd withdrawals after using their cc to buy reps in China.

There are several other payment methods available.
 

Cadows

I'm Pretty Popular
29/3/18
2,052
755
113
Europe
You're joking right? I mean you've been asking all kinds of funny questions over the last year so you must know all watches have flaws even gens. It's particularly evident if you put them into to a microsope.

I see your following my work bruda ;)
 

ChinoWolf

Active Member
Certified
29/10/17
361
113
43
USA
Does anyone know if I use the clean factory bezel and noob bezel ring, what's the best way to make the insert sit flush with the bezel? I just don't like how pointy the clean factory bezel teeth are. I've used double sided tape but it's always hard to make the insert fit evenly flush with the bezel. Sometimes one side is flush the opposite side just sinks into the bezel.

Also, regarding the topic of which factory make the best LV dial, I think BP's dial color is closer to gen but the cut out of the date window is... not so ideal. So what's the next best dial available for 3135?

Appreciate everyone for the feedback on this thread so far.
 

Timewellspent

Renowned Member
Supporter
Certified
2/4/13
644
201
43
USA / Florida
Does anyone know if I use the clean factory bezel and noob bezel ring, what's the best way to make the insert sit flush with the bezel? I just don't like how pointy the clean factory bezel teeth are. I've used double sided tape but it's always hard to make the insert fit evenly flush with the bezel. Sometimes one side is flush the opposite side just sinks into the bezel.

Also, regarding the topic of which factory make the best LV dial, I think BP's dial color is closer to gen but the cut out of the date window is... not so ideal. So what's the next best dial available for 3135?

Appreciate everyone for the feedback on this thread so far.

Vrf has best dial for 116610LV
 

Timewellspent

Renowned Member
Supporter
Certified
2/4/13
644
201
43
USA / Florida
Does anyone know if I use the clean factory bezel and noob bezel ring, what's the best way to make the insert sit flush with the bezel? I just don't like how pointy the clean factory bezel teeth are. I've used double sided tape but it's always hard to make the insert fit evenly flush with the bezel. Sometimes one side is flush the opposite side just sinks into the bezel.

Also, regarding the topic of which factory make the best LV dial, I think BP's dial color is closer to gen but the cut out of the date window is... not so ideal. So what's the next best dial available for 3135?

Appreciate everyone for the feedback on this thread so far.

Vrf is best dial right now
 

hokim

Getting To Know The Place
9/5/19
68
15
8
Does anyone know if I use the clean factory bezel and noob bezel ring, what's the best way to make the insert sit flush with the bezel? I just don't like how pointy the clean factory bezel teeth are. I've used double sided tape but it's always hard to make the insert fit evenly flush with the bezel. Sometimes one side is flush the opposite side just sinks into the bezel.

Also, regarding the topic of which factory make the best LV dial, I think BP's dial color is closer to gen but the cut out of the date window is... not so ideal. So what's the next best dial available for 3135?

Appreciate everyone for the feedback on this thread so far.

i just read through the entire thread, it seems that the CF bezel insert should just fit right into the noob bezel. Have you tried this, and it the CF insert is not sitting nicely in the noob bezel?
 

hokim

Getting To Know The Place
9/5/19
68
15
8

sorry for the poor photos, I have a terrible phone ,ordered one of these clean factory bezels and inserts, I can tell you it's a massive improvement on the noob, it shines nicely the milling of teeth is good. colour of the insert is good, friend has a gen and honestly couldnt tell the difference in the insert apart from the straight edge of the triangle, communication and timely delivery was perfect and as a supporting vendor on another forum, it won't take long for people to start giving recognition. Well worth the money paid, I'm no expert but for me it was well worth buying. One thing I like is the pressure fit, no need for tape or glue etc so will be clean if you want to remove, fits nicely, no rocking bezel, nice click aswel slightly more defined than the noob bezel. As I said earlier I'm no expert but worth what I paid. Any questions let me know. Cheers

its almost four months since you had the CF v1 insert. Has the engravings started to fade?
I have a noob v9 that is a little over a month old and its already showing signs of bezel insert fading. It would suck if the CF inserts start to fade over time too, because then I would have to resort to a spongebob or USD plating mod which I could just do on my stock noob insert instead of having to buy a CF insert and ultimately doing a mod on the CF insert.
 

hokim

Getting To Know The Place
9/5/19
68
15
8
Does anyone know if I use the clean factory bezel and noob bezel ring, what's the best way to make the insert sit flush with the bezel? I just don't like how pointy the clean factory bezel teeth are. I've used double sided tape but it's always hard to make the insert fit evenly flush with the bezel. Sometimes one side is flush the opposite side just sinks into the bezel.

Also, regarding the topic of which factory make the best LV dial, I think BP's dial color is closer to gen but the cut out of the date window is... not so ideal. So what's the next best dial available for 3135?

Appreciate everyone for the feedback on this thread so far.

Apparently post #7 in the below link, Jtime says that CF insert needs to be glued into the noob bezel because of different structures. So i guess its not a simple "plug and play" ? I'm not sure... sigh
https://forum.replica-watch.info/fo...n-factory-v2-insert-for-rolex-116610-ln-vs-v1
 

m88sby

Known Member
28/1/16
125
15
18
hokim after 4 months I can say no mine hasn't faded at all, I mean I wear very sporadically, so might be different if was a daily beater. But mines holding up just fine. And you don't have to glue at all, mine is pressure fitted and been swimming with it, been on the highest and fastest zipline in the world with it and passed the test with flying colours...no joke intended..
 

Kazuko75116

Getting To Know The Place
10/4/18
54
8
8
Hi there,

Sorry i read different posts but i need to be sure before ordering.
Is possible to put the full Clean Factory Bezel onto Noob V5 sub ? Mine is in bad condition, really grayish.
 

Mark1937

Respected Member
Certified
25/3/17
4,305
3,783
113
I have a Sub Noob V7 No Data and I just received a Clean Factory insert, could anyone tell me what I can put on to carry the insert flush? I saw that the insert is thinner than the Noob so you need a thickness below ... tips please?
 

atozzotas

Active Member
7/1/15
443
151
43
I have a Sub Noob V7 No Data and I just received a Clean Factory insert, could anyone tell me what I can put on to carry the insert flush? I saw that the insert is thinner than the Noob so you need a thickness below ... tips please?

double sided tape


Sent from my iPhone using Tapatalk