• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

New PPF 5712 with PP240 Super Clone.....

watchlover162511

Do not accept unsolicited offers
30/7/17
12
4
3
I'm seeing the 5712 with PPF V3 240 clone movement with what appears to be laser print movement (not engraved). Am I wrong? I was really hoping for the engraved 240 clone which PPF V2 had - but not the V3?
 

solexz

The 5712
22/7/22
179
162
43
USA
It’s essentially the same as V2, I’ve seen one already. Dial is VERY marginally better, still no where near the sw/buff/etc. other than that still same shitty mp color, and everything else
 

Swiss_goupil

Respected Member
Patron
Certified
7/12/19
3,780
3,634
113
Last Kingdom
Mine (v2) is with my watchmaker for a service and @Keylog74 moon disk upgrade. Just received an email with this comment regarding the movement:

« Ive stripped the movement now and its just going through the parts washer as we speak. Unfortunately, I have found some wear on the sliding pinion in the keyless. Its not too bad at present, but I think eventually this will fail.

the wear is most likely due to the pinion itself not being "case hardened" to the degree it needs to be »

Just for other owners to be aware
Could any other members report on their movements servicing and if they have this problem also? Wear and tear on the sliding pinion (keyless)?

If this is a wide spread problem we might need an aftermarket upgrade….
 

j-mark

Getting To Know The Place
1/12/22
21
4
3
UK
Mine (v2) is with my watchmaker for a service and @Keylog74 moon disk upgrade. Just received an email with this comment regarding the movement:

« Ive stripped the movement now and its just going through the parts washer as we speak. Unfortunately, I have found some wear on the sliding pinion in the keyless. Its not too bad at present, but I think eventually this will fail.

the wear is most likely due to the pinion itself not being "case hardened" to the degree it needs to be »

Just for other owners to be aware
I have the same piece, so its good to know. Thanks
 

2841

Daytona Hoarder
Certified
6/6/19
2,025
1,933
113
USA
I got one yesterday, still debating with myself if i wanna start a 5712 build. The lack of a good dial at the moment is frustrating :)



 

2841

Daytona Hoarder
Certified
6/6/19
2,025
1,933
113
USA
whats the flaw?
The distance between the numbers is very off. Look at 25, and look at the distance between 2&5. Overall all the date numbers are the wrong size, and the overall print is bad. Its a shame, because it has a very nice color. Maybe v3 they will get it right :)
 
Last edited:
  • Like
Reactions: player233

player233

Getting To Know The Place
13/8/23
17
11
3
The distance between the numbers is very off. Look at 25, and look at the distance between 2&5. Overall all the date numbers are the wrong size, and the overall print is bad. Its a shame, because it has a very nice color. Maybe v3 they will get it right :)
isnt the latest SW dial V3 already?