Do you know if hands were at 12 marker at AM or PM? Watch is not gonna broke for setting it one time...
this was what i saw from the patek site for the 5712.
both hands were on the 12 marker when setting the date, is that fine?
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
New PPF 5712 with PP240 Super Clone.....
- Thread starter dharma
- Start date
No the bezel shape is spot on, it need a tiny bit of refinishing where the brushed edge meets the polished edge, but other then that its good to go
jm_brc_7057
I'm Pretty Popular
this was what i saw from the patek site for the 5712.
both hands were on the 12 marker when setting the date, is that fine?
This says caution between 9pm and 1am. So 12pm is a no go while 12am is good.
Generally speaking you can never go wrong setting calendar complications on any watch at 12am.
I like to ask does PPF v2 crown height the same as gen? Is a mod necessary?
I have a 3kf 5711 and had a mod to reduce the crown height because it protrudes too much
I have a 3kf 5711 and had a mod to reduce the crown height because it protrudes too much
jm_brc_7057
I'm Pretty Popular
Yep. Imho the most important mods are the following:Imo it’s not.
Here is a picture of the stock ppf v2 crown on wrist:
New PPF 5712 with PP240 Super Clone.....
Revised Buff plates for 5712 are about to be released. Received the following pictures:
forum.replica-watch.info
chewy824
Getting To Know The Place
- 18/7/14
- 76
- 55
- 18
Just received my watch from watchsmith with the SW V2 dial installed. The color seems a bit lighter and more blue compared to the SW V1 dial I had earlier. For your reference:
Can you see any green tint in the dial color?Just received my watch from watchsmith with the SW V2 dial installed. The color seems a bit lighter and more blue compared to the SW V1 dial I had earlier. For your reference:
chewy824
Getting To Know The Place
- 18/7/14
- 76
- 55
- 18
Yes, faint green hue under certain lighting conditions.
Is there an alternative to the SW dial? There are so many things wrong with that dial, I just can’t live with it
Alright back from my vacation, big photo dump. Took some pictures last night under LED lighting, and this morning in direct sunlight. One thing I really disliked about the old SW dial is in direct sunlight, dial just turns black. This time around it keeps a lot of blue hues to it. Otherwise you get very good shines of green, light blue, and dark blue. Very gorgeous dial and impressive work from SW.
- 2/5/16
- 1,713
- 1,141
- 113
If my dial is not going to be gen anyway, I prefer the PPF V1 dial color any day of the week.
Who's gonna call me out? ¯\_(ツ)_/¯
Who's gonna call me out? ¯\_(ツ)_/¯
A gen owner saying they hasn't seen that awesome color variant of the gen dial.
Mine (v2) is with my watchmaker for a service and @Keylog74 moon disk upgrade. Just received an email with this comment regarding the movement:
« Ive stripped the movement now and its just going through the parts washer as we speak. Unfortunately, I have found some wear on the sliding pinion in the keyless. Its not too bad at present, but I think eventually this will fail.
the wear is most likely due to the pinion itself not being "case hardened" to the degree it needs to be »
Just for other owners to be aware
« Ive stripped the movement now and its just going through the parts washer as we speak. Unfortunately, I have found some wear on the sliding pinion in the keyless. Its not too bad at present, but I think eventually this will fail.
the wear is most likely due to the pinion itself not being "case hardened" to the degree it needs to be »
Just for other owners to be aware
I got exactly into this problem. I sent the watch back around the end of May and I am waiting to have it repaired.
I have recently received a repair confirmation, but after further inspection/QC video the watch still shows the same problem.
Could not yet get an answer in regard to the work which have been carried on the watch.
https://mega.nz/file/jA0DFDoJ#CiXD41EF3NNMMHLodTHg_JgjwdoVydXtkBS-4W3eCnk
Anyone have the PPF v2 movement fail on them ? I just sent mine to be repaired, the escapement wheel seems to be lodged. Happened out of nowhere and it was only a few days worn. I see people are having minute hand issues, what is that costing you guys if your TD is asking for a charge for it ?
sulfacetamide
Known Member
- 22/8/22
- 130
- 33
- 28
sulfacetamide
Known Member
- 22/8/22
- 130
- 33
- 28
Intime bro;
Nautilus 5712 SS PPF 1:1 Latest and Best Edition Blue Dial on SS Bracelet PPF240 V3(Free tool) - InTimeWatch
Nautilus 5712 SS PPF 1:1 Latest and Best Edition Blue Dial on SS Bracelet PPF240 V3(Free tool)
www.intime06.co