• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

Dead black bay v4

junbug5150

Respected Member
Supporter
24/12/14
4,209
23
38
I have only ever had one watch on mesh, it was a fossil. The only reason I kept it so long was because the mesh was super comfortable. I'm a fan of mesh. Now I gotta get a gen breatling SOH on mesh

That's what Dave said. Look at this PAM! I wants...

pam2aopt.jpg
 

JoeyT

Respected Member
11/8/14
5,374
196
63
your sarcasm isn't appreciated. I'm looking for genuine advice on my black bay

My advice would be to get a Swiss movement put in. Tudor uses Swiss ETA's in there gens so swapping a ETA in would be almost like swapping in a gen movement. Then you won't have any power reserve issues or reliability concerns.
 

Maron

Mythical Poster
16/2/15
9,469
807
113
Canada
My advice would be to get a Swiss movement put in. Tudor uses Swiss ETA's in there gens so swapping a ETA in would be almost like swapping in a gen movement. Then you won't have any power reserve issues or reliability concerns.
That's great advice thank you. What about the cp as [MENTION=53529]DVNE[/MENTION] had the Canon pinion could be a problem. If I get a swiss 2824 do I slso need to acquire an h4 conversion?
 

Raddave

Most Delicious of all Nipples!
Staff member
Global Moderator
Administrator
Certified
24/12/11
67,017
18,593
113
Mine had the long tube hands, so i used a movement with the short wheels and it worked out fine
 

Maron

Mythical Poster
16/2/15
9,469
807
113
Canada
Mine had the long tube hands, so i used a movement with the short wheels and it worked out fine
Does that mean I need to get mine apart first and see what I'm dealing with before even deciding on a movement? Those goofy long tube hands eh
 

Raddave

Most Delicious of all Nipples!
Staff member
Global Moderator
Administrator
Certified
24/12/11
67,017
18,593
113
Does that mean I need to get mine apart first and see what I'm dealing with before even deciding on a movement? Those goofy long tube hands eh


Probably be a good idea.....but....if you got short tube hands on there, it means you got a H4 setup on the movement, those parts could be transfered over to the new movement, but then of course it wont be 100% swiss, but its an option
 

Ronald

Known Member
20/4/15
127
10
0
Nice mesh, were did you get this from?
Thanks


Enviado do meu iPhone usando Tapatalk
 

Maron

Mythical Poster
16/2/15
9,469
807
113
Canada
Probably be a good idea.....but....if you got short tube hands on there, it means you got a H4 setup on the movement, those parts could be transfered over to the new movement, but then of course it wont be 100% swiss, but its an option
Did you do the work yourself Dave?
 

Raddave

Most Delicious of all Nipples!
Staff member
Global Moderator
Administrator
Certified
24/12/11
67,017
18,593
113

FiloViridae

Advisor
Advisor
27/3/15
5,622
31
38
NYC
Hey man... I just had a problem in mine as well, but v1..Swapped in a gen ETA 2824-2. Took about 30 minutes, including what Dave said. I had to swap the tube whee as well (I think that's what it's called). Popped off the DW as well. Super quick and easy. Best thing I could have done. :)
792bd062a425adbd3ed04000110e06b4.jpg



Sent from my iPhone using Tapatalk
 

Maron

Mythical Poster
16/2/15
9,469
807
113
Canada
Hey man... I just had a problem in mine as well, but v1..Swapped in a gen ETA 2824-2. Took about 30 minutes, including what Dave said. I had to swap the tube whee as well (I think that's what it's called). Popped off the DW as well. Super quick and easy. Best thing I could have done. :)
792bd062a425adbd3ed04000110e06b4.jpg



Sent from my iPhone using Tapatalk
Nice man! I don't know if I'm ready to tackle something like that. We'll I'm sure I can do it buy I don't have the time until the summer. Did you also swap the tudor rotor over to your new swiss eta?
 

FiloViridae

Advisor
Advisor
27/3/15
5,622
31
38
NYC
Nice man! I don't know if I'm ready to tackle something like that. We'll I'm sure I can do it buy I don't have the time until the summer. Did you also swap the tudor rotor over to your new swiss eta?

Yes, I did! I swapped the wheel, and two gear trains relating to the hands. I took off the date wheel, and the locking teeth mechanism and spring (whatever that's called).. YouTube yours best friend, if you have questions. Many videos about the 2824. Especially since nothing you're taking off is under pressure, it won't explode when you take screws off Lol


Sent from my iPhone using Tapatalk
 

Maron

Mythical Poster
16/2/15
9,469
807
113
Canada
Ok folks! So the good news is I have officially opened my first case back!!:clap::clap: The bad news is i held the case in this chinese case holder and it left little baby scratches on the polished side of my case in two spots.



So if you all would be so kind to take a look at the movement and let me know what you think, anything relevant. I noticed when I hand wind the crown the rotor moves, when i rotate the rotor round and round the gears turn each other and I hear a click every few rotation. Other than that I think everything looked normal to me. Of course I have no idea what to look for.



















I can take more photos if I didn't show the right things.

Thanks in advance
 

FiloViridae

Advisor
Advisor
27/3/15
5,622
31
38
NYC
I am not sure if anything is going to come from this Maron.. [emoji20] do you have a puffer? Blow out the movement a little bit, and see if that helps


Sent from my iPhone using Tapatalk
 

Raddave

Most Delicious of all Nipples!
Staff member
Global Moderator
Administrator
Certified
24/12/11
67,017
18,593
113
How much does the rotor move when you wind it ?

You changed your mind about swapping it out ?