• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

[CONSENSUAL LIST] Super Reps NWBIGs

Omagad

I'm Pretty Popular
10/11/16
1,570
869
113
Super Reps Temple

Sorry, back is totally off.

Gen :

1023924.png.crop.1000.high.png
 

VIV54

Renowned Member
13/12/17
688
393
63
That’s the old model, the new one has the jlc logo rotor :)
 

Gen2Rep

Getting To Know The Place
20/6/18
24
10
0
;n5087476 said:
Thanks for this list, has been super helpful! I've read elsewhere that the Explorer I 214270 JF v2 is a potential super rep if they would revise the ireggular spacing on the 'Explorer' text otherwise it's pretty much nearly a 1:1 clone minus 1 other discrepancy which hopefully a v3 will fix in a few months.

There have been recent murmurings about updated dial...any traction on that? Explorer 1 214270 by JF v2
(hi newbie here, been lurking for this one for awhile, thought i'd might as well join up...great board guys)

Below are my references...does this need it's own thread in proper area?
The conversations seem to announce/accept it's been decided and a done deal, however in searching this Consensual List I don't see any updates or discussion on the topic.

The buyer's photos looks much improved for the Explorer font
However, the one TD I found claiming to be updated, their photos I can't tell much if any improvement. (and +$80 premium)
TD makes no specific claims on their website, other than product name 'New Black Dial', and on their RWI TD section, no updates/mentions there either...you'd think there'd be a thread going on about it.

So far, none of the below discussions have stated which TD was used, and none have exclaimed any increase in price.
There are still other folks with recent purchase from other TDs saying they're still getting un-corrected font.
The folks claiming 'its all fixed' seem certain, giving the impression that it's been decided and a done deal.

References:
**********
chocolito - That was only on early batches , the flaw with the dial print has been rectified and is now correct .
https://forum.replica-watch.info/fo.../6821070-which-is-the-best-explorer-1-replica

**********
Repworld #302 07-03-18, 20:58
E x problem fixed
https://forum.replica-watch.info/fo...4270-2016-baselworld-39mm-v2-jf-vs-gen/page21
**********
akira448 - Review posted here says JF version.
If it really is then they fixed the EX.
Link and album. Thanks to valentinerh
https://forum.replica-watch.info/for...ful-experience
https://imgur.com/a/uhZyD

Valentinerh - Here's two more photos since I was mentioned above.
https://imgur.com/a/d5iCL
https://forum.replica-watch.info/fo...4270-2016-baselworld-39mm-v2-jf-vs-gen/page23

**********

chocolito - The early batches had E X , now font is correct . I can't provide links , the watch has been out so long the relevant info is deep in the archives and I can't be arsed looking . I have mine on my wrist the font is correct , that is about as good as my ..' it has ? Where? Links? ' ...gets sorry
https://forum.replica-watch.info/fo...p-right-now-besides-the-grape-perpetual/page2
**********

Pigger - Hi everyone, has anyone of you have a explorer I with writing of explorer in the right way?
https://forum.replica-watch.info/fo.../6841710-214270-explorer-i-without-ex-plor-er
**********
chocolito - That was only on early batches , the flaw with the dial print has been rectified and is now correct .
https://forum.replica-watch.info/fo.../6821070-which-is-the-best-explorer-1-replica
**********
https://chazingtime02.co/product/ex...edition-ss-new-black-dial-ss-bracelet-sa3132/

( https://forum.replica-watch.info/forum/chazingtime )
 

Omagad

I'm Pretty Popular
10/11/16
1,570
869
113
Super Reps Temple
There have been recent murmurings about updated dial...any traction on that? Explorer 1 214270 by JF v2
(hi newbie here, been lurking for this one for awhile, thought i'd might as well join up...great board guys)

Below are my references...does this need it's own thread in proper area?
The conversations seem to announce/accept it's been decided and a done deal, however in searching this Consensual List I don't see any updates or discussion on the topic.

The buyer's photos looks much improved for the Explorer font
However, the one TD I found claiming to be updated, their photos I can't tell much if any improvement. (and +$80 premium)
TD makes no specific claims on their website, other than product name 'New Black Dial', and on their RWI TD section, no updates/mentions there either...you'd think there'd be a thread going on about it.

So far, none of the below discussions have stated which TD was used, and none have exclaimed any increase in price.
There are still other folks with recent purchase from other TDs saying they're still getting un-corrected font.
The folks claiming 'its all fixed' seem certain, giving the impression that it's been decided and a done deal.

References:
**********
chocolito - That was only on early batches , the flaw with the dial print has been rectified and is now correct .
https://forum.replica-watch.info/fo.../6821070-which-is-the-best-explorer-1-replica

**********
Repworld #302 07-03-18, 20:58
E x problem fixed
https://forum.replica-watch.info/fo...4270-2016-baselworld-39mm-v2-jf-vs-gen/page21
**********
akira448 - Review posted here says JF version.
If it really is then they fixed the EX.
Link and album. Thanks to valentinerh
https://forum.replica-watch.info/for...ful-experience
https://imgur.com/a/uhZyD

Valentinerh - Here's two more photos since I was mentioned above.
https://imgur.com/a/d5iCL
https://forum.replica-watch.info/fo...4270-2016-baselworld-39mm-v2-jf-vs-gen/page23

**********

chocolito - The early batches had E X , now font is correct . I can't provide links , the watch has been out so long the relevant info is deep in the archives and I can't be arsed looking . I have mine on my wrist the font is correct , that is about as good as my ..' it has ? Where? Links? ' ...gets sorry
https://forum.replica-watch.info/fo...p-right-now-besides-the-grape-perpetual/page2
**********

Pigger - Hi everyone, has anyone of you have a explorer I with writing of explorer in the right way?
https://forum.replica-watch.info/fo.../6841710-214270-explorer-i-without-ex-plor-er
**********
chocolito - That was only on early batches , the flaw with the dial print has been rectified and is now correct .
https://forum.replica-watch.info/fo.../6821070-which-is-the-best-explorer-1-replica
**********
https://chazingtime02.co/product/ex...edition-ss-new-black-dial-ss-bracelet-sa3132/

( https://forum.replica-watch.info/forum/chazingtime )

I'll ask my TDs.
 
  • Like
Reactions: Gen2Rep

palaufreak

Renowned Member
7/7/16
833
593
93
Can you specify what is the tell ? I'm not sure I see it. Is that the thickness of the crown ?
You see that on the gen the crown is made to create an effect like if it has light on the edges coming from the bottom. Don't know really how to explain it, but I've compared it in real life with a friend's Gen op and the crown logo is totally different. Those photos of the gen I posted are exactly how the crown looks in real life. Also the milgauss, skydweller from this era have the same crown effect.

Sent from my SM-G930F using Tapatalk
 

Gen2Rep

Getting To Know The Place
20/6/18
24
10
0
Explorer font does look very good...can you comment on the 3 6 9 seems to look the same, no fix on numerals?
 

Omagad

I'm Pretty Popular
10/11/16
1,570
869
113
Super Reps Temple
You see that on the gen the crown is made to create an effect like if it has light on the edges coming from the bottom. Don't know really how to explain it, but I've compared it in real life with a friend's Gen op and the crown logo is totally different. Those photos of the gen I posted are exactly how the crown looks in real life. Also the milgauss, skydweller from this era have the same crown effect.

Sent from my SM-G930F using Tapatalk

Sorry can you remind me what you're talking about here ? Sorry, hard to follow I have many different simultaneous discussions
 

Gen2Rep

Getting To Know The Place
20/6/18
24
10
0
What about them ?

Numbers 3 6 9 on JF Explorer updated dial, the prior v2 dial numerals is said to be too thin and the shape maybe too curvey, something like that....not that this would preclude SuperRep as I've seen consistent feedback that the font was the only thing holding it back....I was just wondering from an experienced eye if the numerals were updated in the new font dial.
 

Omagad

I'm Pretty Popular
10/11/16
1,570
869
113
Super Reps Temple
Numbers 3 6 9 on JF Explorer updated dial, the prior v2 dial numerals is said to be too thin and the shape maybe too curvey, something like that....not that this would preclude SuperRep as I've seen consistent feedback that the font was the only thing holding it back....I was just wondering from an experienced eye if the numerals were updated in the new font dial.

it's really subtle if there is such a thing.
 

Socialallure90

Known Member
31/5/18
132
17
18
Hello to all
I follow the forum a bit and this thread in particular. I wanted to ask you why the calibre de cartier jjf 1: 1 is not considered a super rep.
thank you