• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

BP Factory Rolex 16710 GMT Full Review VS Gen

HomeRye

HomeRye

Animal magnetism
Supporter
Certified
7/4/20
1,088
815
113
Scotland
rwatch0 said:
Still talking about the casebacks, right?
:)

I made better pics but here it is
Click to expand...

Many thanks for that - so looks like the case diameter from Ken is pretty consistent but the case back from the BP varies - 30.39 for one and 30.89 for another. Anyone else with a BP that can measure theirs too?
 
MikeMeezy77

MikeMeezy77

That’s not 904L…
10/7/20
213
347
63
Michigan
HomeRye said:
Many thanks for that - so looks like the case diameter from Ken is pretty consistent but the case back from the BP varies - 30.39 for one and 30.89 for another. Anyone else with a BP that can measure theirs too?
Click to expand...

Definitely need to see what people are getting for that dimension on their BP’s. It’s gonna be a few weeks for me but will post some pictures

Sent from my iPhone using Tapatalk
 
Last edited:
  • Like
Reactions: HomeRye
RiffRalf

RiffRalf

Renowned Member
10/7/19
912
747
93
USA
hlkrbs said:
What Tool do you use to open the case back?
Click to expand...
Well the soft rubber ball is supposed to be good for this but in my case the caseback was screwed in too tight.
The Rolex tool, or what passes for it on the Bay and on Amazon, is reported not to fit replicas.
A poster here suoggested to glue something on with superglue and then twist it off
from the interweb I scored a suggestion to glue a socket on and then turn it off
Which is what I did
Came of with hand turning pressure only
And my back case from Ken's Store fits like a charm!
And looks better and feels better on the wrist
As you can see the watch is riding high on the wrist.

20200829_111306001c2cfddebe174b.md.jpg
wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==
​
20200829_111254a3b4bde1d2b076d2.md.jpg
wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==
​
Tried to take the caseback off with the rubber balll trick but that did not work
20200830_133658ba632e1faf617547.md.jpg
wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==
​
So went on line to look for alternatives. glued on a socket with Gorilla Glue and let it sit for 24h.

20200830_13333367c685518b4972d7.md.jpg








20200830_13335635b6246f7a26cbd6.md.jpg

20200830_13461865cd70060f6fbeee.md.jpg

The caseback went on just fine, as if it was made for it. This time I used the rubber ball to tighten it. And it sits and rides much better on the wrist now. Daily wearer material!
Even though this one is in contention, but just ever so slightly on the pricier side .....
​​​​​​​
20200830_133627af20fee17834a482.md.jpg

20200830_13374853bc7d0b3ff17772.md.jpg

20200830_13420414acd063eba065a5.md.jpg

20200830_134212f4268c15c0dfe9c6.md.jpg


Now all I need to do is find a way to get that socket off the casback LOL!
I read heating it up will dissolve it ....
 
Last edited:
  • Like
Reactions: HomeRye
Rubberman

Rubberman

Forever young
Certified
9/12/17
1,092
390
83
Seems like I'm the only one that have different case set for my BP.
525c140f61737a84c4c261282ce6e07b.jpg
3b973c46a8abdbb3486dd24007bfdaff.jpg
 
KJ2020

KJ2020

Time Traveler
Supporter
12/3/18
35,388
69,792
113
Soak the caseback in acetone (Goof off or nail polish remover), it will dissolve the glue. Set it up in a closed metal container, acetone evaporates quickly otherwise. Rinse with alcohol when done, should be good as new.
 
  • Like
Reactions: Thrasher and RiffRalf
K

kraxas

Getting To Know The Place
9/11/19
16
1
0
Does it’s worth to buy and meaby modded later? Or it would be better to buy a custom build right away?
 
L

lfarcos

Renowned Member
30/4/16
684
105
43
Hi everyone

I want to order this BP 16710, it is nice

Where i can order a correct caseback?

OOTB is thick, i would like to replace it

Thanks in advance!
 
Thrasher

Thrasher

Legendary Member
15/4/14
13,212
2,320
113
The Beach
I just got back to Los Angeles from a trip to Colorado and the case backs are here. They fit ......thankfully and reduce the overall thickness to 12.6 mm, This is just 2/10ths of a millimeter thicker than the case backs I found in my drawer. I see above that another member got these, so now at least we have a step in the right direction.
 
  • Like
Reactions: MikeMeezy77, HomeRye and KJ2020
Thrasher

Thrasher

Legendary Member
15/4/14
13,212
2,320
113
The Beach
Rubberman said:
Can you help to take a measurement on the thread size on the caseback that you received?
Just got mine but it is half mm too small for my BP which is at 30.9mm. It does indeed half mm thinner than the BP one.
Click to expand...

The ones I got measure 30.3 and fit my BP 16710
 
  • Like
Reactions: KJ2020
HomeRye

HomeRye

Animal magnetism
Supporter
Certified
7/4/20
1,088
815
113
Scotland
lfarcos said:
Hi everyone

I want to order this BP 16710, it is nice

Where i can order a correct caseback?

OOTB is thick, i would like to replace it

Thanks in advance!
Click to expand...

Ken from Raffles dials (links in this thread) is the place, but he’s sold out just now and says it may be Jan next year before he gets them back in.
 
H

hlkrbs

Getting To Know The Place
21/7/20
54
18
8
My caseback arrived today :) will try to fit it tomorrow, just ordered a case opener. No clue how to open it, anything to take care of while opening it ?
 
MikeMeezy77

MikeMeezy77

That’s not 904L…
10/7/20
213
347
63
Michigan
hlkrbs said:
My caseback arrived today :) will try to fit it tomorrow, just ordered a case opener. No clue how to open it, anything to take care of while opening it ?
Click to expand...

Try the rubber ball method first.


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Top Bottom