- 3/12/15
- 723
- 169
- 43
thanks a lot. I will wait your reviews of how sits arf bracelet in the BP case. :drinks_cheers:
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
ARF 126334 DateJust 41, Best in the market
- Thread starter kobe24
- Start date
The GEN Date disc must be used as an overlay. Here is my video: http://www.watch-portal.net/video/24/gen-rolex-3235-date-wheel-fit-as-overlay-to-eta-2824/
And to buy one, here's my sales thread: https://forum.replica-watch.info/fo...ories/8253485-5x-gen-rolex-3235-111-date-disc
So do you cut/peel/extract the top layer of the gen date wheel and glue it on the 2824 date wheel?
Dissemination
Renowned Member
I've seen people talk about a spacer being needed sometimes.. have you found this to be the case often?
The ARF or BP DJ41 already has a date overlay on delivery. You only need to swap them with the GEN Date Disc. So there is no difference in the gap between dial and movement!
Dissemination
Renowned Member
Ok good to know. I know some modders are hesitant to do it. But this is helpful, thanks!
- 3/12/15
- 723
- 169
- 43
do u know if is possible to swap the arf dial in the Bp case?? i knew the dial arf doens't fit in bp case because arf uses dial bigger than BP.
Not much, depending on the bezel. The white gold bezel has slightly more mass... but it's not really noticeable you'd need both in your hand / scales.
- 3/12/15
- 723
- 169
- 43
fantastic, thanks for your time and your review, do you know if the arf dial sits correts in the bp case?? i heard arf dial is too big and doens't fit in bp case because it's bigger than BP dial
Last edited:
wewillrock123
Active Member
Cheers Guys,
Just texted WSO and asked them if they r thinking about producing a DW for the 3235 ,
the answer was , they could if me/somebody provided one (even broken/old)....
so i guess we still need to wait for bettoban´s project or go gen for the DW mod
Just texted WSO and asked them if they r thinking about producing a DW for the 3235 ,
the answer was , they could if me/somebody provided one (even broken/old)....
so i guess we still need to wait for bettoban´s project or go gen for the DW mod
- 3/12/15
- 723
- 169
- 43
wewillrock123
Active Member
yep , thats what i was told at least ...
dont think that a scan+measurments would be enough for them
- 3/12/15
- 723
- 169
- 43
alternatively, all of us interested in this project can put together the money (10 euros each = 15 people) and buy a dw gen to send to WSO
wewillrock123
Active Member
would be in ,
asked them for futher detailes ,lets see what they will answer .
only question who is taking care of the process and how good u think the final product will be ?
if it is as good as some of their 3135 DW´s i would be satisfied
Just an update for anyone who wants to buy BP.... I have a spare ARF Jubilee bracelet being sent over from China. federik91 - The ARF jubilee will fit perfectly the Bp case and obviously any ARF DJ41.
So if anyone wants an ARF Jubilee bracelet... and has wrists at 7"s it willl fit you and save you waiting (took over 3 weeks to order and come through) I've taken out 2 links from it, as I needed extra links as I have 8.25" wrists...
So providing your wrists are around 7.25" it will fit. I'll make a sales thread anyway once I've got it, but just a heads up if anyone is interested in it can send me a PM.
Once I remove the 2 links I need, I can measure it and give you exact wrist sizes.
Cheers
So if anyone wants an ARF Jubilee bracelet... and has wrists at 7"s it willl fit you and save you waiting (took over 3 weeks to order and come through) I've taken out 2 links from it, as I needed extra links as I have 8.25" wrists...
So providing your wrists are around 7.25" it will fit. I'll make a sales thread anyway once I've got it, but just a heads up if anyone is interested in it can send me a PM.
Once I remove the 2 links I need, I can measure it and give you exact wrist sizes.
Cheers
anyone That’s modded one of these see this little lip inside the Rehault, I’m wondering if it’s just my case hasn’t been machined properly or is it there for a reason. It leaves this ugly gap between the dial and the rehault edge. After installing the gen3235 date disc I couldn’t get the dial back in and the stem hight dropped dramatically. Pretty sure the gen doesn’t have this gap.
"ARF case DJ 41 It's a joke.
Gen form is like a mirror, no distortion plating chrome"
My arf lugs doesn t look that round.
Gen form is like a mirror, no distortion plating chrome"
My arf lugs doesn t look that round.