PP 324SC Super Clone

[legend]

kobe24 gilrob legend Thanks for your reply. If it is really a super clone of Cal.324SC movement, then just curious, the question remained is..

why do the major dealers (trusty, ts, pf) states that it is a modified Miyota 9015 with decorated to Cal. 324SC ? All of them are saying that it is modified Miyota 9015 with deco, not even mentioning super clone.

( I am not confused with the other factory PPF’s movement. I did triple check each description carefully at each dealer’s website description for 3KF Aquanaut multiple times. ).

What I miswrote was that the 3K clone movement has the same balance wheel position as the Miyota 9015 movement. But this was untrue as I was looking at the ZF 5167 by mistake.
I went to have a look at the 3K caliber and found that it does have the same balance wheel position as the cal.324, and therefore, I am certain that it is not a miyota 9015 movement. The listing by the dealers could be a mistake in this case. The 3K clone movement isn't a miyota base one which is decorated, but a completely new one from everything I've seen so far. What I am unsure of is the extent to which the movement was "cloned" vs gen.

 

[Repworld]

V6F keep this Asian base movement secret that’s what I believe, so no answer..


Sent from my iPhone using Tapatalk

 

[Repworld]

It’s clone customized movement made by V6F only.


Sent from my iPhone using Tapatalk

 

[kobe24]

kobe24 gilrob legend Thanks for your reply. If it is really a super clone of Cal.324SC movement, then just curious, the question remained is..

why do the major dealers (trusty, ts, pf) states that it is a modified Miyota 9015 with decorated to Cal. 324SC ? All of them are saying that it is modified Miyota 9015 with deco, not even mentioning super clone.

( I am not confused with the other factory PPF’s movement. I did triple check each description carefully at each dealer’s website description for 3KF Aquanaut multiple times. ).

https://puretimewatch.io/featured-p...l-on-black-rubber-strap-a324-super-clone.html

PT has it, super clone

 

[Repworld]

https://puretimewatch.io/featured-p...l-on-black-rubber-strap-a324-super-clone.html

PT has it, super clone

Waiting 3k 5711 !!!


Sent from my iPhone using Tapatalk

 

[donpepe]

Is it 8.1 mm now?
all major dealers describing it as 8.5 and up

 

[guessit]

Good start but I think engravings are absolutely necessary

 

[legend]

Good start but I think engravings are absolutely necessary

I agree. It makes no sense to go 95% of the way to clone a movement and not the remaining 5% to give it the correct finish/engravings, especially for a see through caseback.

 

[thestefster]

It makes perfect sense... need to sell v2!

 

[domsdaddy123]

I agree. It makes no sense to go 95% of the way to clone a movement and not the remaining 5% to give it the correct finish/engravings, especially for a see through caseback.

^ THIS.....It’s a complete tease without the engravings....



Maybe Tickleshoes can work some magic until / if not the factories decide to fully commit and do the job job themselves?

I’m hoping it’s just an overlooked detail on the prototype and not the makers fear of Patek Commando’s, lol....

 

[vcappp]

Repworld Do you think that 3KF and V6F are same people? 3KF = V6F = VSF = KWF ?

 

[gilrob]

Repworld Do you think that 3KF and V6F are same people? 3KF = V6F = VSF = KWF ?

I asked Angus (PureTime CEO and Owner) about what connections, if any, does 3KF have with V6F, VSF or any other factory. His reply via PM was that 3KF is an independent factory with no connections with any factory.

 

[SuperLory]

I Loled at CEO

 

[SHB]

Lol

 

[Repworld]

Kobe announced , V6F give it to 3k , it’s mean same clone movement V6F shared by Andrew from two years ago yes ..


Sent from my iPhone using Tapatalk

 

[Repworld]

Shared by angus sorry,

Sent from my iPhone using Tapatalk

 

[jm_brc_7057]

Shared by angus sorry,

Sent from my iPhone using Tapatalk

Applause!! Thanks for sharing mate. What we are seeing here is a Nautilus with a balance cock position different than the Miyota and actually at place of the gen. So either this is a gen or a clone movement 5711. Judged by the obscured engravings I guess it's a clone movement?

And if Angus has it I take it release is imminent?

 

[Repworld]

Applause!! Thanks for sharing mate. What we are seeing here is a Nautilus with a balance cock position different than the Miyota and actually at place of the gen. So either this is a gen or a clone movement 5711. Judged by the obscured engravings I guess it's a clone movement?

And if Angus has it I take it release is imminent?

This’s supposed a clone V6F from two years ago , 3k finish this project , this what I see , I don’t think there’s two makers with two clones ..


Sent from my iPhone using Tapatalk

 

[gilrob]

Applause!! Thanks for sharing mate. What we are seeing here is a Nautilus with a balance cock position different than the Miyota and actually at place of the gen. So either this is a gen or a clone movement 5711. Judged by the obscured engravings I guess it's a clone movement?

And if Angus has it I take it release is imminent?

The picture is a clone 324 SC movement that V6F released to Angus about 3 years ago. It is the forerunner of the clone 324 SC movement that 3KF now has. If you want more background information on this clone movement, it can be found in Angus Industrial Insights, VSF/V6F.... thread.

 

[Repworld]

If no connection between between V6F and 3k , ok where’s is V6F clone!!!!?


Sent from my iPhone using Tapatalk