• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

VSF 126610 Submariner with VS3235 Latest Movement 72 Hours Power Reserve

KJ2020

Time Traveler
Supporter
12/3/18
34,663
66,756
113
Hi everyone,

This is my VSF 126610LV as well. :( The bezel finally popped off ( dont know why ) and all the springs and stuff are missing for me now.

I asked my TD about the parts but still can’t get an answer.

Someone had the same problem and found the solution will be great for me. :(

Thnx.


ab36a986344b54d0262e8c48b8f16e13.jpg

If you still have your click, you can buy replacement springs and balls pretty cheaply.

If you have also lost the click you will have to buy a whole new set. TDs will not source these parts.

https://m.pt.aliexpress.com/item/10...fzdo0jgcawlb17afd7bbf7c2537ab7d51356da&gclid=

https://m.pt.aliexpress.com/item/100...bilesitedetail
 
Last edited:

Anonray

Renowned Member
Patron
Certified
8/10/18
866
912
93
Recently got my 126LV, faced a few problems in the beginning with the winding but a local watchsmith was able to solve it easily and also did a full service. Runs extremely well and smooth now. IMO, there is no other rep that is better than this ootb.

jHv1To.jpg
 

WatchSmith.US

-- Watchmaker --
Vendor (Watch Repair)
Certified
13/3/16
1,289
2,007
113

Impreza19

Getting To Know The Place
20/5/21
21
2
3
france
More I look about VSF, more I think it's a sugess ocean rebadged.
I modded one as a Seiko and everything except dial is similar...
 

Spiral_Cabbage

Active Member
12/2/18
462
140
43
Conus
Has anybody had issues with fading bezel on the 126610? Mine seems to have dulled a bit, it doesn’t have a bright luster like it should

Have you tried cleaning the insert with warm water and dish soap, using a soft bristle toothbrush? It might just do the trick. If your already fading, it can’t hurt any, and you might just be surprised.
 

Denny14

Known Member
7/9/16
115
13
18
hi all guys, I got my QC photos, the watch is great as it always does. VSF do not miss a shot my question concerns the closure do you find that as the last batch there is this wording 3VV?
I post some photos of the watch to remove any doubts, the most experienced will surely be able to give a certain answer. Also because there are rumors that VSF does not really produce anymore and the TDs sell other watches for them, but honestly this watch comes from JTime and Li is an extremely serious person, I trust him, but I want to dispel these lies that they tell themselves .
Regards
 

j21

wawaweewa
Supporter
Certified
16/1/21
2,267
2,693
113
EU
hi all guys, I got my QC photos, the watch is great as it always does. VSF do not miss a shot my question concerns the closure do you find that as the last batch there is this wording 3VV?

Yep.Some after raid ones i have seen have this clasp code
 

derjenigewelcher

Watch enthusiast
Supporter
Patron
Certified
22/11/20
8,697
11,221
113
Switzerland
Denny14

Do you think a dealer like Li will risk his reputation by selling you a BP as a VSF?
As you say yourself, he takes his business seriously.
If he sells you VSF, it's VSF.
By the way: perfect Rehaut, perfect SEL, aligned bezel.

G R E E N LIGHT:)
 
  • Like
Reactions: Akilles

Mille M

I'm Pretty Popular
24/7/18
1,254
2,757
113
Nah, nothing to do with vsf.
Rough case, with fat lugs, not so good bezel, sels are not that good...
Can't see if the crystal is as good as VSF, but I doubt it.

It's not a bad attemp, but VSF is clearly better.
 

subhunter101

Known Member
1/6/16
126
13
18
Have you tried cleaning the insert with warm water and dish soap, using a soft bristle toothbrush? It might just do the trick. If your already fading, it can’t hurt any, and you might just be surprised.

Just tried it and it gave back the Oomph shinyness that it was missing. Thanks!
 

Spiral_Cabbage

Active Member
12/2/18
462
140
43
Conus
Just tried it and it gave back the Oomph shinyness that it was missing. Thanks!

That is great news! Mine still looks great and it’s from February. I give it a weekly clean and it still looks great.
I think that there is some oxidation that occurs that darkens it. Luckily a little scrub helps out.
 

Delifisek53

Banned member, the goat does not approve
Banned
13/9/20
63
27
0
If you still have your click, you can buy replacement springs and balls pretty cheaply.

If you have also lost the click you will have to buy a whole new set. TDs will not source these parts.

https://m.pt.aliexpress.com/item/10...fzdo0jgcawlb17afd7bbf7c2537ab7d51356da&gclid=

https://m.pt.aliexpress.com/item/100...bilesitedetail

Thanks again KJ.!!

TD couldnt find the parts and my only option is to buy from Ali I think.

Unfortunately I lost every part under the bezel. Luckily I have the bezel with me. :)