- 13/3/16
- 1,289
- 2,007
- 113
That’s the small version of the date seating plate
I was trying to find out if R makes two versions but it vent to the corner as there is only one part number for the plate
Sent from my iPhone using Tapatalk
I wonder if the dial’s date window is in a different locations on large and small date wheel versions? Or is the date window in the same location on both versions?
I doubt VS made two different versions
Sent from my iPhone using Tapatalk
Actually, I worked on VS 126610s who fit a 3235 dw (like datejusts) and 126610 who needed a 3135 datewheel instead. Guess the first batches were different than the latest..
I have a VSF dial here, I’ll take the measurements when I have the chance.
Can you measure the vertical edges of the date window from the dial edge at 3 o'clock? I'll ask someone to do the same on a VSF DJ41 dial.
Yes sir, it's 3.6mm.
That would make sense assuming the gen DJ36 is a newer one with a 3235. Should be the same for a new DD36 with a 3255.
I don't see any way those discs would work in a 126334 though so there would have to be two different 3235 date indicator seatings.
Pic is from Logixa on pg 1
Thanks bro. That's the outer dial window edge yes? Can we get the inner edge distance too for a complete picture?
The aperture measures 2.8mm left to right which should put the inside window edge at 6.4mm from outside of the dial.
Great thanks
So we have for the 126610
Dial - 28.28mm (maybe 28.3mm nominal)
Date window distance from 3 o'clock dial edge -
L to R: 6.4mm to 3.6mm