GIG
Active Member
- 9/9/22
- 337
- 270
- 63
Vsf is superior to ZF hulk in most ways.
Personally I think the font on ZF dial too bold. The color may be nice but I wouldn't swap for a ZF dial from Vsf.
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
The VSF Submariners Thread
- Thread starter StreetFighter
- Start date
Vsf is superior to ZF hulk in most ways.
Personally I think the font on ZF dial too bold. The color may be nice but I wouldn't swap for a ZF dial from Vsf.
GGEuroHEADSHOT
Renowned Member
How come the spider legs cyclops edge distortion was supposedly removed in previous batches but we are still seeing it in the QC pics? Or am I not seeing things right
So some update as ive just recieved a few pieces of the latest version of Starbucks from VSF.
Here are the findings.
All watches with the stickers on are the latest version of K25.
Non stickered is my pre raid.
Overview
1) crystal
As updated from about 6 month ago, no more distortion on the VSF now, but HALO effect is lacking. Which makes the cyclops feel flat, but clear! As VSF always do.
2) lume pip
Clear upgrade from pre raids and even before this batch. The pip bezel is now very thin compared to the old thick ones. Which is ACTUALLY an easy way to spot a VSF rep.
Pip color is more pearly now rather than muted.
3) SEL fitting and mid link step
Clearly. To me at least, that the older VSF have nicer and snugger fit on their SELs compared to new ones
As for mid link step, both have a defined step and close up, it does not look over polished at all. However, the newer ones have a slightly higher step than the pre raids. In real life, to my eyes, this is not visible. Unlike comparing a 11 series to a 12 series. (I'm just doing this shot since there were talks about it earlier in the thread.)
Here are the findings.
All watches with the stickers on are the latest version of K25.
Non stickered is my pre raid.
Overview
1) crystal
As updated from about 6 month ago, no more distortion on the VSF now, but HALO effect is lacking. Which makes the cyclops feel flat, but clear! As VSF always do.
2) lume pip
Clear upgrade from pre raids and even before this batch. The pip bezel is now very thin compared to the old thick ones. Which is ACTUALLY an easy way to spot a VSF rep.
Pip color is more pearly now rather than muted.
3) SEL fitting and mid link step
Clearly. To me at least, that the older VSF have nicer and snugger fit on their SELs compared to new ones
As for mid link step, both have a defined step and close up, it does not look over polished at all. However, the newer ones have a slightly higher step than the pre raids. In real life, to my eyes, this is not visible. Unlike comparing a 11 series to a 12 series. (I'm just doing this shot since there were talks about it earlier in the thread.)
Sounds like overall an improvement vs. pre-raidSo some update as ive just recieved a few pieces of the latest version of Starbucks from VSF.
Here are the findings.
All watches with the stickers on are the latest version of K25.
Non stickered is my pre raid.
Overview
1) crystal
As updated from about 6 month ago, no more distortion on the VSF now, but HALO effect is lacking. Which makes the cyclops feel flat, but clear! As VSF always do.
2) lume pip
Clear upgrade from pre raids and even before this batch. The pip bezel is now very thin compared to the old thick ones. Which is ACTUALLY an easy way to spot a VSF rep.
Pip color is more pearly now rather than muted.
3) SEL fitting and mid link step
Clearly. To me at least, that the older VSF have nicer and snugger fit on their SELs compared to new ones
As for mid link step, both have a defined step and close up, it does not look over polished at all. However, the newer ones have a slightly higher step than the pre raids. In real life, to my eyes, this is not visible. Unlike comparing a 11 series to a 12 series. (I'm just doing this shot since there were talks about it earlier in the thread.)
Bracelet seems to have been changed. it feels good but the SEL seems to be sagging more now and it doesn't fit tight and flush.
More photos for comparison.
Both cases are the new watch with pre raid springbars.
The one with stickers are the new bracelet, you can see obviously it doesn't fit snug and there's slight sag.
But when I pop the pre raid bracelet over. It's as good as the good ol' times.
More photos for comparison.
Both cases are the new watch with pre raid springbars.
The one with stickers are the new bracelet, you can see obviously it doesn't fit snug and there's slight sag.
But when I pop the pre raid bracelet over. It's as good as the good ol' times.
That sounds badBracelet seems to have been changed. it feels good but the SEL seems to be sagging more now and it doesn't fit tight and flush.
More photos for comparison.
Both cases are the new watch with pre raid springbars.
The one with stickers are the new bracelet, you can see obviously it doesn't fit snug and there's slight sag.
But when I pop the pre raid bracelet over. It's as good as the good ol' times.
- 25/3/21
- 839
- 636
- 93
Great comparison @2fast4lust
I also have a pre-raid 126610LV and my SELs are tight too but would like to replace the xtal, date wheel (print sitting too low) and bezel. I have enquired with a few TDs and all of them have said they can't order the VSF parts separately. Looking at gen xtal and gen date wheel and buying a VSF v2 sub and swapping the bezel out. Do you find the "floating m" is less of an issue on the v2 watch?
I also have a pre-raid 126610LV and my SELs are tight too but would like to replace the xtal, date wheel (print sitting too low) and bezel. I have enquired with a few TDs and all of them have said they can't order the VSF parts separately. Looking at gen xtal and gen date wheel and buying a VSF v2 sub and swapping the bezel out. Do you find the "floating m" is less of an issue on the v2 watch?
To be honest, floating m for me a very small problem if not invisible to my eye at all. I've never ever bothered about it.
Gen xtal is probably a good swap for the Starbucks IMO, I would consider it if I found one for a good price, non blistered.
- 13/6/21
- 325
- 171
- 43
Tobel
Respected Member
- 6/7/17
- 5,456
- 3,673
- 113
Looks amazing congrats. Even the 1st R on the rehaut engraving is aligned.
Approved vsf no date
- 4/9/20
- 2,880
- 3,448
- 113
It’s a realistic sky easy fix but requires a watch case/crystal/bezel press (with the correct sized dies) to get the bezel back on accurately and without damaging the retaining gasket. It may also require some spare parts (eg balls and springs) for the ratchet mechanism. These parts are easy to acquire on AliExpress. And your local watchsmith should have the correct press and dies.
Seeing both K28 and 25 on VSF no date version. Looks like either is fine and can be considered latest batch
Just got my VSF 116613LB here are some pics.
I think the saying about the cheddar gold is kindish correct. In direct sunlight it doesn´t look orange at all, in dark light however you can see, that its probably not the right gold tone.
See the pictures below
I think the saying about the cheddar gold is kindish correct. In direct sunlight it doesn´t look orange at all, in dark light however you can see, that its probably not the right gold tone.
See the pictures below
