• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

The 1016: The Under Appreciated Thread

1675lover

Active Member
23/7/22
299
349
63
@ Rafflesdials ken, if u're reading this thread... please come up with a mk3 dial with lume and with NH dial feet.... lol

The swiss - t < 25 should be in between the chapter ring indices and not directly below the "6"
r8xxxxxx-mark-3-2.jpg
 

Geonor

I'm Pretty Popular
Patron
Certified
20/5/22
1,300
3,216
113
Norway

369mafia

Resident Explorer Expert
Patron
Certified
7/7/15
3,561
6,387
113
Canada
Watching this in Youtube using autotranslate (if you don't understand Japanese) works pretty well!

Is it just me... or did they show the MK5 dial as MK4, and vise-versa?? Also, should the MK2 not have the SWISS text at the top of the minute markers?
the mk0 should be the mk2 mk2 is late 60's 68 but more commonly 69 ( That is what I have a mk2 dial from ruby)
mk1 frog foot is first series of matte dial mid 60's (no accurate rep dial available )
they claim mk2 is same as mk5 but its a mk3
their mk3 is a mk4 dial with taller cornet (no accurate rep dial available )
their mk4 is a mk5 dial
their mk5 dial is a mk5 dial

 

Megahz1

Vintage lover
6/5/18
89
323
53
EU
I finally got to revamp the case of an old 1016 build I completed a couple of years ago as the lugs of the case offered by Raffles bothered me too much. Here the build with stock case:



And here the reshaped case compared to gen 1016. I shaved down the lugs from the top and I think it is a good compromise considering that the lug holes cannot be moved and I do not want to mess with the bottom of the lugs. Still needs retapping, polishing and serials; I will post updates here! Pic was taken with 2x zoom which makes it look fatter than irl.

 

Karbon74

Pika Factory
Patron
Certified
5/5/23
10,261
20,013
113
EU - Kalos Region
I finally got to revamp the case of an old 1016 build I completed a couple of years ago as the lugs of the case offered by Raffles bothered me too much. Here the build with stock case:



And here the reshaped case compared to gen 1016. I shaved down the lugs from the top and I think it is a good compromise considering that the lug holes cannot be moved and I do not want to mess with the bottom of the lugs. Still needs retapping, polishing and serials; I will post updates here! Pic was taken with 2x zoom which makes it look fatter than irl.

that case looks so much more elegant
 
  • Like
Reactions: 369mafia

1675lover

Active Member
23/7/22
299
349
63
took apart this build. clipped the feet and slapped it on the NH38 with double sided tape.
still waiting for the seconds hand to arrive...


1234.jpg


I think it looks pretty aligned. what do you guys think?
12345.png


fingers crossed on installing it into the case after the seconds hand reaches my hand (no pun intended..)
i hope the rotor clears the caseback lol
 

Karbon74

Pika Factory
Patron
Certified
5/5/23
10,261
20,013
113
EU - Kalos Region
guys,

do you know where I can find JKF 5513 or 5512 dials? they are 26mm

if you have some unused from builds you made with other dials, I will be happy to buy them
 

Karbon74

Pika Factory
Patron
Certified
5/5/23
10,261
20,013
113
EU - Kalos Region
I am quite happy with the cheap JKF dials.
The idea is to make builds that are very affordable. <400€

a Helenarou dial will run about 100€ from memory, so it breaks the concept.

I think I found a good option. What I need dials to experiment. You cannot do that with AliX dials as either they are really badly printed or the treatment experience is not transferable

Raffles makes the 5517 dial in 26mm and only it, whoever knows why 😅

It should be fairly easy to delete the "T"
 

369mafia

Resident Explorer Expert
Patron
Certified
7/7/15
3,561
6,387
113
Canada
I am quite happy with the cheap JKF dials.
The idea is to make builds that are very affordable. <400€

a Helenarou dial will run about 100€ from memory, so it breaks the concept.

I think I found a good option. What I need dials to experiment. You cannot do that with AliX dials as either they are really badly printed or the treatment experience is not transferable

Raffles makes the 5517 dial in 26mm and only it, whoever knows why 😅

It should be fairly easy to delete the "T"

they also offer a tudor sub dial in 26 as an option