• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

The 1016: The Under Appreciated Thread

1675lover

Active Member
23/7/22
299
349
63
my guess is he will eventually release the other dials with nh feet.
unfortunately some of the 1016 dials he offers aren't to my liking..:ROFLMAO:
if only he has a white lume 1016 that resembles the mk3...
r8xxxxxx-mark-3-2.jpg
 

1675lover

Active Member
23/7/22
299
349
63
seiko movements have the same dial feet position.
nh34 (gmt), nh35 (date only), nh36 (day date), nh38 (open heart). nh70/71/72 (skeletonized version of the nh35 with no ghost date position and no plastic casing)
I used a 2824, but I have a couple NH35/NH38 from Ali that I plan to use in some upcoming builds. I think the Raffles dials have feet for both, unless the 38 is different than the 35,
imo i think the nh38 is the best choice for a 1016 build right now with the raffles case - no ghost date position, big surface area if mounting a non-NH dial, u can drop it in without any movement clamps and movement ring.

now all we need is more dial choices with nh feet ootb + nh hands (and preferably with 13mm seconds and minute hands for the hardcore fans).
 
  • Like
Reactions: 1016_idiot_savant

dpd3672

Putting the "whore" in "horology" since 2023
Patron
Certified
29/5/23
1,742
2,853
113
USA
There seems to be a lot more nhxx stuff in the market than eta, for sure
 

dpd3672

Putting the "whore" in "horology" since 2023
Patron
Certified
29/5/23
1,742
2,853
113
USA
yup

also. if anyone has an idea for a quartz movement that could hit the Raffles cases...I would love to do a quartz 1016 😁
I picked this up a while back, because there’s instructions in it for building a dial feet soldering machine (yet another project on my plate, lol). There’s a chart that shows compatibility between mechanical and quartz watches, I’ll look to see if anything is a direct fit for the ones we use (citizen/seiko/eta).

 
  • Like
Reactions: Karbon74

kiev4a

Getting To Know The Place
20/9/14
95
8
8
I picked this up a while back, because there’s instructions in it for building a dial feet soldering machine (yet another project on my plate, lol). There’s a chart that shows compatibility between mechanical and quartz watches, I’ll look to see if anything is a direct fit for the ones we use (citizen/seiko/eta).

Should you provide the page with dial solder schematics?
thanks!
 
  • Like
Reactions: dpd3672

1016 lover

Active Member
4/10/22
490
823
93
So I guess the solution is still the standard double sided tape. Hmm.
Curious to see how it holds up overtime.

I have a spare NH movement that I might test to see if I can use the dial feet holes and DIY new dial feet positions for the ETA based dial I’m using…
I glued my last tiffany with gs hypocement, work well 👍
 
  • Like
Reactions: Karbon74

1016_idiot_savant

Active Member
Supporter
Certified
3/2/23
480
1,397
93
Denmark
there is a space to figure out too.
but maybe the Raffles stock spacer can be adapted. Oh well, a project to the backlog
It should be easy enough to 3D print a spacer to fit a Raffles case. Other specs:
Diameter 23.70mm
Casing Diameter 23.3mm
Height 3.45mm thick
Beat Rate 14,400 vph, 2 Hz
Accuracy Rating +/- 15 sec/month
Battery Cell Number 371 (SR920SW)
Battery Life ~2 years
Stem 351177/tap 10 or 351892/tap 11
Hand Sizes 1.20mm / .70mm / .17mm
 
  • Like
Reactions: 316lad and Karbon74

316lad

Renowned Member
8/8/23
906
1,786
93
UK
It should be easy enough to 3D print a spacer to fit a Raffles case. Other specs:
Diameter 23.70mm
Casing Diameter 23.3mm
Height 3.45mm thick
Beat Rate 14,400 vph, 2 Hz
Accuracy Rating +/- 15 sec/month
Battery Cell Number 371 (SR920SW)
Battery Life ~2 years
Stem 351177/tap 10 or 351892/tap 11
Hand Sizes 1.20mm / .70mm / .17mm
You wouldn't want to print it full height of movement though/ More like Height: 1.7mm and don't forget to leave a cutout for the stem.
 
  • Like
Reactions: Karbon74

dpd3672

Putting the "whore" in "horology" since 2023
Patron
Certified
29/5/23
1,742
2,853
113
USA
I made some up for 3D printing...they're for a few different movements/cases, but should work if you find the one you need and print it.
This file is just a catch all for works in progress, but one of the movement holders should work, or it could be the basis for the "correct" one if you tweak the measurements.

 

automatico

Getting To Know The Place
5/10/11
92
174
33
"if anyone has an idea for a quartz movement that could hit the Raffles cases...I would love to do a quartz 1016."

I put one in a '5513' a while back.
Mercedes type hands for a TAG Heuer with 955.xxx etc. quartz movement will fit.
Fourth post down...

 
  • Like
Reactions: Karbon74