{*PCTeam*} PAM 111 Noob V3 - Discussion, Compilation of data, Wristshots, QC pics

[ALE7575]

Be calm !
Most of QC pics received here have the correct 2 at 12

But it seems that some last QC pics have the wrong 2
http://forum.replica-watch.info/vb/sho...11-125473
and the QC pics showed in RWG is wrong too.

OMG! maybe there are differences in the batches from Noob (due to two dial suppliers?)
No problems. Most of them are OK
FROM NOW:

BE CAREFUL WITH THE QC PIS OF PAM 111 V3 Noob !!!!!!!!!

Please assure the 2 at 12 has correct font !!!

ALE

 

[Jay123]

The watch on the left on the comparison shown on the last page is my watch, is there a bad batch of dials going about?

 

[fana05]

my QC picture on the right compared to Toro's picture advertising the V3

When I first received the QC pictures 8 days ago, I asked him to confirm that it was actually the V3. I asked that in general, not even knowing that the 2 was off.. haven't heard back from him since and I also emailed him this picture today. What would be an appropriate action on his part/my part? I'm anal about details and would hate to receive it with that flaw, albeit miniscule

 

[ALE7575]

The watch on the left on the comparison shown on the last page is my watch, is there a bad batch of dials going about?

Yes Jay123, I know that because I have just read your thread in RWG.

Unfortunately, it seems that there are already some watches V3 with wrong dial.
At this moment I know about yours and Debellum's:
http://forum.replica-watch.info/vb/showthread.php/my-new-111-125473

Maybe, Noob has at this moment two suppliers of dials and one of them is wrong.

PLEASE BUYERS: BE CAREFUL WITH QC PICS AND BEAR IN MIND THIS ISSUE.
I think it would be interesting to start an specific warning thread about that

ALE

 

[watchman12345]

This is something that unfortunately happens a lot with reps. You think you have something sorted and all of a sudden there is a change in supplier and we go back a step again!

 

[ALE7575]

ANOTHER watch found with this issue:

http://forum.replica-watch.info/vb/showpost.php?p=1216683&postcount=405

We have already four cases:
Jay123
Debellum
fana05
Gel-007

ALE

 

[Jay123]

Im considering asking TD for a a refund to be fair, at first i would of been happy to have it swapped but it looks like a supplier problem and not a "one off"

 

[ALE7575]

Im considering asking TD for a a refund to be fair, at first i would of been happy to have it swapped but it looks like a supplier problem and not a "one off"

Unfortunately, dealer will say it is not your flaw, but a flaw from the maker, and that it has not the opligation of selling a completely accurate replica, but the replica made by the maker.
And you have accepted QC pics

WE NEED TO BE ALERT IN QC PICS, it is the only solution.

ALE

 

[Fiddo]

Im considering asking TD for a a refund to be fair, at first i would of been happy to have it swapped but it looks like a supplier problem and not a "one off"

It may not be all of the recent dials...maybe just some, hopefully.

 

[Jay123]

Unfortunately, dealer will say it is not your flaw, but a flaw from the maker, and that it has not the opligation of selling a completely accurate replica, but the replica made by the maker.
And you have accepted QC pics

WE NEED TO BE ALERT IN QC PICS, it is the only solution.

ALE

I havent accepted the pictures? Where have you read this?

 

[Rwolf]

This is the old flawfull 111H dial, old school... that's incredible! Maybe we can open a thread abouth this problem and we can invite Angus/Puretime to partecipate and to contact Noob-factory...

 

[ALE7575]

I havent accepted the pictures? Where have you read this?

Oh ! Sorry, I thought yes
Then no problem you can reject the watch. OK

ALE

 

[ALE7575]

This is the old flawfull 111H dial, old school... that's incredible! Maybe we can open a thread abouth this problem and we can invite Angus/Puretime to partecipate and to contact Noob-factory...

It is urgent
I will prepare the thread here
You Rwolf could prepare the RWG thread. OK??

ALE

I don't understand that from Noob !! It is serious

 

[ALE7575]

ANOTHER CASE:

And this watch from 11 nov 2012 from mullica

http://forum.replica-watch.info/vb/showpost.php?p=1200217&postcount=376

ALE

 

[Rwolf]

It is urgent
I will prepare the thread here
You Rwolf could prepare the RWG thread. OK??

ALE

I don't understand that from Noob !! It is serious

I'm only here, not in other forums... :lolcina:

 

[ALE7575]

I'm only here, not in other forums... :lolcina:

Ok RW Sorry
I will try to publish in RWG

ALE

 

[ALE7575]

Noob V3 dial issue in some watches

WARNING !!!!!!!
FOR GENERAL INFORMATION
There are some watches PAM 111 V3 from Noob with a dial issue in font of the "2"

This is the dial "2" issue you must detect in QC pics:

The "2" at RIGHT is COMPLETELY WRONG

ALE

 

[Rwolf]

I contacted Angus about this problem.

 

[ALE7575]

I contacted Angus about this problem.

Well done Rwolf !!

I have already posted WARNING thread here in RWG and REP GEEK

It is understandable !!

ALE

 

[puretime]

Noted and will inform noob maker on Monday, thanks guys