Would like to thank @RX7GP once again for the awesome pictures comparison. Helped greatly with my choice of factories to go for the 116500!
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
Panda Daytona 116500 GEN VS NOOB, Clean V2, BT V2, Full comparison
- Thread starter steve_theonewatches
- Start date
spaceman007
Active Member
- 5/1/22
- 219
- 57
- 28
I assume he is talking about BTF v3. @RX7GP
However, I bought a clean and thought about selling it off for a BTF. Honestly, I would assume 99% noone would be able to tell any differences in slight variations in the dial color, or how daytona is written etc. Noone is taking a magnifying glass to your watch.
Also 99% of people in the world have no idea what a daytona is. lol
Does that means BTF corrected their issues with the dial?
Compared with Clean some months ago, i was going to get a CF with a deep xtal, but if BTF dial is now closer to gen like CF is, i'm glad i hold the gun and will get a BTF V3 then.
Compared with Clean some months ago, i was going to get a CF with a deep xtal, but if BTF dial is now closer to gen like CF is, i'm glad i hold the gun and will get a BTF V3 then.
Yup I would say so.. I compared and looked into the side by side comparision that @RX7GP have posted with his gen panda and the BTF honestly looked great imo
I hope everyone is doing well. I have bought a few daytonas in the past and the movements have been timebombs. With the new heavy daytonas and amazing dials has the movement reliability been fixed or is it still an issue?
I’ve never owned one, but I can tell you from my experience with the 4130 and my research that the newer clones are very reliable, far more than the 7750.
Thank you for all your pics! But the question remains: Where did you get it? Cant find it in any TDs and its making me itch.
Grover222
Do not accept unsolicited offers
Hi, I'm a new guy just getting into rep watches.
I'm just writing to give my opinion on the Clean vs BTF Daytona Pandas.
I have purchased both a Clean and a BTF in the past month from different TDs. I don't know about the version numbers but the product descriptions are:
- Daytona 116500 Clean 1:1 Best Edition 904L SS Case and Bracelet White Dial SA4130 V2
- Daytona 116500 BTF V2 1:1 Best Edition 904L SS Case and Bracelet White Dial SA4130
Note that I've never held a gen so I have no idea how either of these compare to that, but only to each other.
Xtal --
BTF -- I received the BTF first and thought it looked great. As some people have noted, the dial is very bright white, which some people say is slightly different from the gen. The bright white doesn't bother me though.
Clean -- I received the Clean a few days later, and I can hardly look at it. The xtal appears very cloudy when viewed straight on and gives the dial a dull, fuzzy look. You can tilt the watch and the xtal looks better, but it is annoying to me. I prefer the BTF xtal by far.
So since I have the choice, I don't think I will be wearing the Clean ever unless I upgrade the xtal.
Pushers --
One other small difference I noticed is the knurls on the pushers on the Clean are much smoother, it makes unscrewing them a little harder than the BTF. The BTF is easier to unscrew and twist with one finger since it has sharper edges on the knurls. Again, I cannot compare to a gen, but it is a noticeable difference I found.
Bracelet --
Both bracelets look great. It is really hard to say why, but the Clean bracelet feels more substantial -- a little more robust, in a way. This is very subtle, but if you hold both you can feel a slight difference. Again, I have no idea which one is more like a gen, but I prefer the feel of the Clean bracelet.
So I think I'll put the Clean bracelet on the BTF and wear that watch. Not sure what I'll do with the other one.
Thanks for your time if you read all this.
I'm just writing to give my opinion on the Clean vs BTF Daytona Pandas.
I have purchased both a Clean and a BTF in the past month from different TDs. I don't know about the version numbers but the product descriptions are:
- Daytona 116500 Clean 1:1 Best Edition 904L SS Case and Bracelet White Dial SA4130 V2
- Daytona 116500 BTF V2 1:1 Best Edition 904L SS Case and Bracelet White Dial SA4130
Note that I've never held a gen so I have no idea how either of these compare to that, but only to each other.
Xtal --
BTF -- I received the BTF first and thought it looked great. As some people have noted, the dial is very bright white, which some people say is slightly different from the gen. The bright white doesn't bother me though.
Clean -- I received the Clean a few days later, and I can hardly look at it. The xtal appears very cloudy when viewed straight on and gives the dial a dull, fuzzy look. You can tilt the watch and the xtal looks better, but it is annoying to me. I prefer the BTF xtal by far.
So since I have the choice, I don't think I will be wearing the Clean ever unless I upgrade the xtal.
Pushers --
One other small difference I noticed is the knurls on the pushers on the Clean are much smoother, it makes unscrewing them a little harder than the BTF. The BTF is easier to unscrew and twist with one finger since it has sharper edges on the knurls. Again, I cannot compare to a gen, but it is a noticeable difference I found.
Bracelet --
Both bracelets look great. It is really hard to say why, but the Clean bracelet feels more substantial -- a little more robust, in a way. This is very subtle, but if you hold both you can feel a slight difference. Again, I have no idea which one is more like a gen, but I prefer the feel of the Clean bracelet.
So I think I'll put the Clean bracelet on the BTF and wear that watch. Not sure what I'll do with the other one.
Thanks for your time if you read all this.
mmaggi
Renowned Member
@Grover222 - Good review. Thanks for sharing.
It's the old dilemma re the 116500 (black & white dial versions): Clean or BTF? For me there is no wrong answer. It's whatever you prefer. What's great is that these factories keep leap frogging each other, they keep raising the bar.
It's the old dilemma re the 116500 (black & white dial versions): Clean or BTF? For me there is no wrong answer. It's whatever you prefer. What's great is that these factories keep leap frogging each other, they keep raising the bar.
Grover222
Do not accept unsolicited offers
yeah the reason why normally people who ordered Clean would request for deep crystal swap
Grover222
Do not accept unsolicited offers
Thanks @kulaki ! Next time I'll request it. How much does it cost for that swap? Have you done it? I haven't seen it offered on the TD websites.yeah the reason why normally people who ordered Clean would request for deep crystal swap
It seems like a big mystery about where to do this aftermarket now that I've received the watch in the U.S.
Is there a thread or link where I can find info on modding my CF?
Thanks in advance!
IF i remember correctly, steve from theonewatch quoted $68 for the crystal and free service to swap it out!
Can't advise on the afterrmarket/local pricing for the watchmaker in U.S tho since I am not based there..
You need to ask if they can do it. My cf v3 panda I asked onewatches to do it. Charged about $50-60, can’t remember as he gave me a discount. But you need to ask as they don’t normally advertise.
Hi guys What do you think about this modded https://forum.replica-watch.info/threads/daytona-116500-noob-v4-bezel-cf.10959661/ ? My intent is to buy an Clean v3 but i notice the cream colour of the dial and the terrible crown hole . I think this one is more like gen . Please help me !
