-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
PAM 1312 from VSF Released!
- Thread starter jonnybaws
- Start date
Repworld
Mythical Poster
- 27/12/16
- 6,353
- 1,568
- 113
I know it’s un seen , but i hat look to open case back even clone movement.
Sent from my iPhone using Tapatalk
Repworld
Mythical Poster
- 27/12/16
- 6,353
- 1,568
- 113
But 312 Rep from genuine, still we don’t know about 1312 .
Sent from my iPhone using Tapatalk
- 3/4/11
- 982
- 166
- 43
Panerai is and wears big. It always has until the 42mm editions came about. There were some early 40mm models in the past but they were mostly irrelevant or ignored because there was no market audience for them. My take on this is: pick the one you like and feel comfortable with. It's going to be and look bigger than a Tudor, most Omegas, Oris, Rolex etc. It's part of the Panerai look and appeal
Is it difficult to source gen Panerai parts, besides straps? I don’t see any franken Pam models around, so I gather it must be. Based on earlier comments, it would be interesting to swap gen hands and dial on this model.
very difficult. there are pam frankens out there as I have quite a few, but getting parts is nigh on impossible nowadays.
Repworld
Mythical Poster
- 27/12/16
- 6,353
- 1,568
- 113
I bought a gen rubber strap for 1312 , I hope I’m lucky for one time with next batch, plan B 1441 I’m 100% sure side by side with genuine coming with correct thickness and case .
My dreams pam , I know it’s impossible, I’m sure my next 1441.
Sent from my iPhone using Tapatalk
Im sure there will be the tiniest thing wrong with that one aswell.
:headdesk:
Repworld
Mythical Poster
- 27/12/16
- 6,353
- 1,568
- 113
Depending price yes will not be super Rep 358$ , if there’s 1312 gen replication price should be same 441 or 1441 400$.
Sent from my iPhone using Tapatalk
- 24/5/18
- 721
- 249
- 43
i have finally receive my 1312 and 1313 (and of course i have immediatly throw away the rep strap on both ... maybe the 1312 are better than the 1313 strap, but both are trash and very rough and tight)
Otherwise these watches are awesome ! like always VSF did a really good job.
So, to be honest now, Repworld has right, but in some "terms". let me explain
the REG. T.M engraving are indeed different between 1313 and 1312
BUT the 1312 engraving are not "badly" done or finished like Repworld suggest, they are just less "deeper" and more thinner than the 1313 , here some pics to highlight clearly the difference :
and i don't know wich engraving are more gen like ? changing the CG is very easy so in my next order i will ask my td to get the correct CG in spare parts
Otherwise these watches are awesome ! like always VSF did a really good job.
So, to be honest now, Repworld has right, but in some "terms". let me explain
the REG. T.M engraving are indeed different between 1313 and 1312
BUT the 1312 engraving are not "badly" done or finished like Repworld suggest, they are just less "deeper" and more thinner than the 1313 , here some pics to highlight clearly the difference :
and i don't know wich engraving are more gen like ? changing the CG is very easy so in my next order i will ask my td to get the correct CG in spare parts
Last edited:
Repworld
Mythical Poster
- 27/12/16
- 6,353
- 1,568
- 113
i have finally receive my 1312 and 1313 (and of course i have immediatly throw away the rep strap on both ... maybe the 1312 are better than the 1313 strap, but both are trash and very rough and tight)
Otherwise these watches are awesome ! like always VSF did a really god job.
So, to be honest now, Repworld has right, but in some "terms". let me explain
the REG. T.M engraving are indeed different between 1313 and 1312
BUT the 1312 engraving are not "badly" done or finished like Repworld suggest, they are just less "deeper" and more thinner than the 1313 , here some pics to highlight clearly the difference :
and i don't know wich engraving are more gen like ? changing the CG is very easy so in my next order i will ask my td to get the correct CG in spare parts
It’s not only bad engraving, wrong position Olso , i hope they fix it in next batch.
Sent from my iPhone using Tapatalk
- 24/5/18
- 721
- 249
- 43
stop telling is BADLY engraved, it is NOT !
they are correctly engraved but less deeper and thinner than the 1313
concerning the position, it's so tiny and small that you don't even see the difference on the wirst, c'mon ...
gen vs rep from https://forum.replica-watch.info/fo...xx-luminor-1950-caseset-vsf-vs-gen-comparison
i think i will ask a CG from the 1313 and put in on the 1312 and we are good !
they are correctly engraved but less deeper and thinner than the 1313
concerning the position, it's so tiny and small that you don't even see the difference on the wirst, c'mon ...
gen vs rep from https://forum.replica-watch.info/fo...xx-luminor-1950-caseset-vsf-vs-gen-comparison
i think i will ask a CG from the 1313 and put in on the 1312 and we are good !
Repworld
Mythical Poster
- 27/12/16
- 6,353
- 1,568
- 113
stop telling is BADLY engraved, it is NOT !
they are correctly engraved but less deeper and thinner than the 1313
concerning the position, it's so tiny and small that you don't even see the difference on the wirst, c'mon ...
gen vs rep from https://forum.replica-watch.info/fo...xx-luminor-1950-caseset-vsf-vs-gen-comparison
i think i will ask a CG from the 1313 and put in on the 1312 and we are good !
See gen CG engraving position
I think only 441 correct CG position .
Sent from my iPhone using Tapatalk
- 24/5/18
- 721
- 249
- 43
I mean the bevel of this part.
(Forgive me for my drawing skills)
Gen has a clearly polished chamfer, rep 1312 is definitely not. This usually distinguishes almost all reps from gen.
In the comparison, you will be able to see the gen from the known comparison thread, rep 1312 and below your samples 1312 and 1313.
