PAM 111 Noob V3->V4, KW–V6Fac & H maker - (**QC pics checking**)

[sexybeast]

how much r these selling for these days?

 

[ShanghaiStyler]

in the M2M?

Usually the used ones go for 25% off the purchase price as far as I saw

 

[bambambida]

Hello @ALE7575

I hope you're doing well
Just received QC pictures from TD and after reading all treads and topics about V3 and V4 differences I noticed this issues:

-Crown looks like a V3 version
-Caseset is a V3 in my opinion but it’s hard to tell from this angle. I asked a 12 to 6 angle picture.
-Officine Panerai engraving looks acceptable but hard to tell because the picture quality is low
-Y incablock is ok but the regulator dagger is not touching the Swan neck spring

What do you think about that do you agree?

Thanks

 

[SpootyPuff]

Is it easy to source that screw that is opposite of the swan neck to help regulate time?


Long story- short, just received PAM111 today and it's missing it. Wasn't missing in the QC pics though. Just shot an email to the TD, will see how they'll rectify this.

Pic:

 

[shoes]

I had similar problem with the micro screw going missing and on opening the case back it fell out. Worth opening your watch and retrieving it before it blocks the movement...


Sent from my iPhone using RWI

 

[SpootyPuff]

I had similar problem with the micro screw going missing and on opening the case back it fell out. Worth opening your watch and retrieving it before it blocks the movement...


Sent from my iPhone using RWI

Thanks man! I was searching for it for a few minutes without taking the case back off, but as soon as I took it off it was wedged between the plates.... now I just gotta find a local smith to put this back on

 

[up_right]

Thanks man! I was searching for it for a few minutes without taking the case back off, but as soon as I took it off it was wedged between the plates.... now I just gotta find a local smith to put this back on

My Noob PAM 111 V3 also had the same problem... the micro screw came out and lodged in the hairspring. Not cool!

 

[shoes]

I have noticed that the swan neck mounting block has either badly cut to non existent threads on some of my watches so I have simply removed the screw. it serves no purpose and is a potential risk of damage. No one looks at the back of my watches except me [emoji4]


Sent from my iPhone using RWI

 

[d4m.test]

I placed an order of Pam 111 V4 N from Chazing time. QC just sent some pics. Anybody got any idea that this might be revised version of V3

 

[ckwhon]

I placed an order of Pam 111 V4 N from Chazing time. QC just sent some pics. Anybody got any idea that this might be revised version of V3View attachment 48625 View attachment 48626 View attachment 48627 View attachment 48628 View attachment 48629 View attachment 48630

I believe your micrometer screw will fall off soon

 

[TnoJ24]

I believe your micrometer screw will fall off soon

Pardon the noob question, but can you please pinpoint where the micrometer screw is in the picture?

 

[ffuhcu]

If you take a look at the shot of the back of kurokyli's QC, on the right hand side, there is the incablock and the adjustment lever (+ and - next to it). The adjustment lever is flanked one side by the swan neck and the other by the micro adjustment screw, you can see it side on.

Mine fell off once and stopped the movement, had it serviced and it's fallen out again however the watch still runs. I need to get the back off and see if I can find it and fish it out for good.

 

[Dr.Ogba]

Can you glue the micrometer screw?

Skickat från min SM-G930F via Tapatalk

 

[hanl0210]

do you guys think that either removing it at all or fixing it with loctite is any good?


Gesendet von iPhone mit Tapatalk

 

[GeoAnarg]

Can someone point out where is the micrometer screw? I just received my 111 and might have same problem.

Sent from the RWI App

 

[GeoAnarg]

Sent from the RWI App

 

[GeoAnarg]

Sorry just saw the reply!!!!

Sent from the RWI App

 

[TnoJ24]

If you take a look at the shot of the back of kurokyli's QC, on the right hand side, there is the incablock and the adjustment lever (+ and - next to it). The adjustment lever is flanked one side by the swan neck and the other by the micro adjustment screw, you can see it side on.

Mine fell off once and stopped the movement, had it serviced and it's fallen out again however the watch still runs. I need to get the back off and see if I can find it and fish it out for good.

Thanks for the reply, I see it now

 

[ckwhon]

I was thinking if every noob Pam 111 has the micrometer screw being loose? I have so far met 3 pieces with this issue. What could be the reason?

 

[mysterio]

I was thinking if every noob Pam 111 has the micrometer screw being loose? I have so far met 3 pieces with this issue. What could be the reason?

Just poor assembly QC. As it's not a functional part, my feeling is that the factories don't give this as much attention as the functional parts.