PAM 111 Noob V3->V4, KW–V6Fac & H maker - (**QC pics checking**)

[shoes]

I think it's a bad batch of swan neck assemblies that are drilled and tapped oversize and as mysterio says the factory don't think it's worth fixing as it's decorative, and it's there when it leaves the factory.... what happens afterwards is not their problem.

I am thinking it's possible to cut the screw and fix it back in using superglue (very small amount) one half against the adjustment lever the other projecting out the other side


Sent from my iPhone using RWI

 

[d4m.test]

Hi everyone, I'm buying my first rep (decided on the iconic PAM111 Noob 'v4'). Can anyone help me out in discerning whether this is a true "v4 Noob" version PAM111? Or is it a combination of
v3 and v4? Also, it seems that having the micrometer screw loose is a common problem on these PAM111 reps, anyone know if the watch in my QC photos show this issue of micrometric screw being loose? I've tried looking at it and am not sure or am too inexperienced to really tell if it is loose or not. Any help is appreciated!

 

[SubSquared]

I think it's a bad batch of swan neck assemblies that are drilled and tapped oversize and as mysterio says the factory don't think it's worth fixing as it's decorative, and it's there when it leaves the factory.... what happens afterwards is not their problem.

I am thinking it's possible to cut the screw and fix it back in using superglue (very small amount) one half against the adjustment lever the other projecting out the other side


Sent from my iPhone using RWI

So whats the consensus? Can you just remove the micrometer screw if it falls out and leave it out? Why would you put it back if its decorative only? And if left in, should it be screwed all the way in so it touches the lever between + - (not sure of the name)

 

[ckwhon]

Hi everyone, I'm buying my first rep (decided on the iconic PAM111 Noob 'v4'). Can anyone help me out in discerning whether this is a true "v4 Noob" version PAM111? Or is it a combination of
v3 and v4? Also, it seems that having the micrometer screw loose is a common problem on these PAM111 reps, anyone know if the watch in my QC photos show this issue of micrometric screw being loose? I've tried looking at it and am not sure or am too inexperienced to really tell if it is loose or not. Any help is appreciated!

View attachment 53256 View attachment 53258 View attachment 53260 View attachment 53262 View attachment 53264

Your micrometer screw is not touching the regulator lever. I would assume is loose.

 

[ckwhon]

So whats the consensus? Can you just remove the micrometer screw if it falls out and leave it out? Why would you put it back if its decorative only? And if left in, should it be screwed all the way in so it touches the lever between + - (not sure of the name)

Screwing all the way can tighten the micrometer screw, but not sure if it will affect the time because you are pushing to the - in order to make it tight. Maybe the rest can advise.

 

[shoes]

The whole swan neck assembly is decoration only and so yes you can remove the screw or tighten it and it will have no effect


Sent from my iPhone using RWI

 

[maxracingshox]

@ALE7575 please have a look if you don't mind. I just got this watch and I am curious.
The value and level to detail on these Pams is insane as is the lume. Couldn't be happier!

 

[ALE7575]

@ALE7575 please have a look if you don't mind. I just got this watch and I am curious.
The value and level to detail on these Pams is insane as is the lume. Couldn't be happier!

Thos watch is a Noob
Caseset V3
Crystal V4
Crown V3
Movement with modified Y shape Incabloc

ALE

 

[maxracingshox]

Thos watch is a Noob
Caseset V3
Crystal V4
Crown V3
Movement with modified Y shape Incabloc

ALE

Thanks man

 

[xanos]

just take a pam111 v3 and change incablock ! you will have a superrep

 

[Dr.Ogba]

just take a pam111 v3 and change incablock ! you will have a superrep

Isnt the v4 made up from rests from v3 and with correct y incablock?

Skickat från min SM-G930F via Tapatalk

 

[Sunsurfer]

Hi guys,

I have ordert a noob v4 pam111, I love it

Now I got the QC pics. To me the watch looks nice, and I don't see any damage, but I cannot see which parts are v3/v4. :-/
@ALE7575 Could you please help me?

Thank you very much for your help!

 

[Indochine]

Hey guys!
What do you think about this one?
It should be a Noob V4. I've already asked about the screw...

Thank you in advance!

View attachment 30404 View attachment 30409 View attachment 30414 View attachment 30419 View attachment 30424 View attachment 30429 View attachment 30434 View attachment 30439 View attachment 30444 View attachment 30449

 

[xanos]

Isnt the v4 made up from rests from v3 and with correct y incablock?

Skickat från min SM-G930F via Tapatalk

I am not sure , but I don't think so !

 

[xanos]

I am not sure , but I don't think so !

v3 vs v4 pam111 mechanism

 

[piero980]

@ALE7575 i know the angle of the pics is not good for this purpose, but you can give me your opinion please?
thanks in advance

 

[piero980]

@ALE7575 i know the angle of the pics is not good for this purpose, but you can give me your opinion please?
thanks in advance
View attachment 56356 View attachment 56357 View attachment 56358 View attachment 56359

@mysterio


Sent from the RWI mobile app

 

[ja14]

HI @ALE7575

how am i looking?
thanks!

 

[up_right]

HI @ALE7575

how am i looking?
thanks!

Send photos of the caseback...

 

[ja14]

Send photos of the caseback...

sorry here you go
thanks againView attachment 76653