• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

Noob V4 Daytona's

p0pperini

patr0n h0arder
Gold Patron
Certified
29/1/19
9,390
33,826
113
UK
by that I meant that there was nothing written on the dial


Aaaah... gotcha. As rolexlover79 said, DHGate and Aliexpress won't allow the open sale of reps, so sellers have to photoshop their pics to remove the branding. When buying from the Gate (there are occasionally decent bargains and good cheapies there), I always ask for a QC pic just to confirm what I'll be getting is a branded dial, and not sterile.
 

werdn

Getting To Know The Place
10/9/18
31
0
6
I would replace the xtal gasket first with a clear / gen spec gasket. The original Noob gasket is milky and easily distinguishable (imo, even more than the hands).

edit. Personally, I have a list of replacements like this (roughly in order of bang for the buck, ymmv):
  • Gen spec xtal gasket
  • CF bezel (if ceramic, dunno about others)
  • Aftermarket hands
  • Aftermarket dial
  • Gen crown and crown tube (if current one feels gritty to screw back in)
  • Gen hands
  • Gen balance and balance bridge
  • Gen autowinder module
  • Gen bezel
  • Gen dial
If I had to choose just a few, I would put in a replacement gasket, aftermarket hands & dial and gen balance + balance bridge. Cost stays reasonable, but the effect is definitely noticeable. Obviously also have a full service done if replacing movement parts.

Hey, do you know if aftermarket black dial is any good? I know the subdials on the noob is too shiny on the black, and don't know if i can find a gen black dial
 

alleyezonme

Known Member
Patron
Certified
20/3/15
143
45
28
London, UK
Sorry if this question has been asked before, but the noob v4 116519 on rubber oyster flex, would this take a ARF daytona oyster stainless steel or noob steel bracelet?

Would the case allow it?

if anyone can charm their experience and knowledge on this please?
 

andyc

Nitimur in vetitum
Certified
4/6/10
1,598
546
113
Sorry if this question has been asked before, but the noob v4 116519 on rubber oyster flex, would this take a ARF daytona oyster stainless steel or noob steel bracelet?

Would the case allow it?

if anyone can charm their experience and knowledge on this please?

Not without serious modifications......

I've recently had Nikz19 do some work for me to achieve what you are seeking - I have a NOOB 116519 (which was mounted on a genuine Rubber B strap) - and I also have a NOOB 116500. At my request, Nikz19 has swapped the dials over, so that the 116519 dial is now on a bracelet and the 116500 dial is on the Rubber B strap.

As below:

Nikz-Work-2.jpg


Nikz-Work-1.jpg



(I also had the ceramic bezel on my black dial NOOB 116500 replaced with a CF steel bezel)
 
Last edited:
  • Like
Reactions: P..DR..D

SuperLory

Well-Known Repist
22/10/15
8,455
5,046
113
Not without serious modifications......

I've recently had Nikz19 do some work for me to achieve what you are seeking - I have a NOOB 116519 (which was mounted on a genuine Rubber B strap) - and I also have a NOOB 116500. At my request, Nikz19 has swapped the dials over, so that the 116519 dial is now on a bracelet and the 116500 dial is on the Rubber B strap.

As below:

Nikz-Work-2.jpg


Nikz-Work-1.jpg



(I also had the ceramic bezel on my black dial NOOB 116500 replaced with a CF steel bezel)

i cant see the photos so i’m shooting blindly here but why would you want to swap the cases since 1 is precious metal and the orher is steel ? Should have just swap the bracelet
Also the 116500 black dial cannot become an 116520 ..the text is different ! But hey whatever floats your boat
 

andyc

Nitimur in vetitum
Certified
4/6/10
1,598
546
113
I swapped because I wanted to....!

You can't just swap the bracelets over because a 116519 case has totally different lugs to a 116500 case. I love the look of the 116519 dial on a bracelet, and I also love the white dial on the Rubber B. I'm also fully aware that there are small differences between a 116500 dial and a 116520 dial.....!
 

Keishara

Daytona Nerd
25/2/21
581
596
93
If you want rubber strap on 116500 you just need to put smarty end links on the 116500 case
 

andyc

Nitimur in vetitum
Certified
4/6/10
1,598
546
113
I wanted the 116519 dial on a bracelet - hence the swap.
 

andyc

Nitimur in vetitum
Certified
4/6/10
1,598
546
113
Last edited:

bertieng

I'm Pretty Popular
26/11/18
1,249
477
83
I swapped because I wanted to....!

You can't just swap the bracelets over because a 116519 case has totally different lugs to a 116500 case. I love the look of the 116519 dial on a bracelet, and I also love the white dial on the Rubber B. I'm also fully aware that there are small differences between a 116500 dial and a 116520 dial.....!

The watch case of 116500 and 116519 is different in shape? Never knew about this.
is it the same case in gen too?
 

Keishara

Daytona Nerd
25/2/21
581
596
93
The watch case of 116500 and 116519 is different in shape? Never knew about this.
is it the same case in gen too?
Cases that use oysterflex are different to the ones that use the oyster bracelet yes.

(attached some images, that was posted prior, can't remember source)
8b7b5b5a703262ecefc5cefabc3ce373.jpg
3fba3e5dadb3486307c2fe67f74a9b66.jpg
 

JohnnyDangerous

Known Member
29/3/19
164
215
43
Mine is clear but the seller insists that it is a CF Bezel...
Here are some more photos, apologies for the bad quality photos, but it seems that's as good as my camera will do at the moment:
 

enduser

Renowned Member
Patron
Certified
29/7/20
562
415
63
UK
I've never seen a Clean ceramic bezel without the Clean logo on the rear. Is it scuffed between 100 110 and 110 and 120?