Noob V4 Daytona's

Mark1937 · 16/5/21

bunny123 said:
Hello everyone !
just acquired a gen 116500LN at a ridiculous price . thought Il share a picture . enjoy!

https://imgur.com/a/mcCwR6M

ridicolous price?

Bobi01 · 16/5/21

butler182 said:
It's my understanding it's best to solder new dial feet in place. There's a great post detailing the moderately challenging work here: https://forum.replica-watch.info/fo...feet-without-an-expensive-machine#post7009925

I do recall reading some posts discussing gluing or taping the dial in place, but that seems a bit short sighted and potentially risky if you need to disassemble in the future. I am by no means an expert though, so would love to hear some thoughts from others with more experience on the topic.

Nikz19

GMTlover · 16/5/21

SuperLory said:
yeah my rep also not bad

Sweet

SOLEX · 16/5/21

butler182 said:
It's my understanding it's best to solder new dial feet in place. There's a great post detailing the moderately challenging work here: https://forum.replica-watch.info/fo...feet-without-an-expensive-machine#post7009925

I do recall reading some posts discussing gluing or taping the dial in place, but that seems a bit short sighted and potentially risky if you need to disassemble in the future. I am by no means an expert though, so would love to hear some thoughts from others with more experience on the topic.

Thanks for the link, would love to know their thoughts as well!

vipstyle888 · 17/5/21

https://youtu.be/BSZ3eRWOdgM

Here's a gen vs rep comparison. I'm just assuming this is a Noob

srhoque · 17/5/21

bunny123 said:
Hello everyone !
just acquired a gen 116500LN at a ridiculous price . thought Il share a picture . enjoy!

https://imgur.com/a/mcCwR6M

If Noob doesn't come back, even rep prices will be ridiculous

KJ2020 · 17/5/21

butler182 said:
It's my understanding it's best to solder new dial feet in place. There's a great post detailing the moderately challenging work here: https://forum.replica-watch.info/for...ne#post7009925

I do recall reading some posts discussing gluing or taping the dial in place, but that seems a bit short sighted and potentially risky if you need to disassemble in the future. I am by no means an expert though, so would love to hear some thoughts from others with more experience on the topic.

Soldering on new dial feet is a high level skill that few people will master. Using epoxy to glue new feet in place is a safe and reliable alternative that is much less difficult and less risky - a dial can be scorched while soldering. Also when gluing there is no need to precisely locate the new feet positions since the feet are already in place in the movement when the dial is set.

I describe the process in detail in the thread linked below for anyone interested.

The Hulktimate - GREEN goes GOLD!

For those who can solder, you have my admiration! If you can't, join the club - there's still hope for the rest of us.

bunny123 · 17/5/21

Mark1937 said:
ridicolous price?

Yes! Almost thrice of the RRP.

butler182 · 17/5/21

KJ2020 said:
Soldering on new dial feet is a high level skill that few people will master. Using epoxy to glue new feet in place is a safe and reliable alternative that is much less difficult and less risky - a dial can be scorched while soldering. Also when gluing there is no need to precisely locate the new feet positions since the feet are already in place in the movement when the dial is set.

I describe the process in detail in the thread linked below for anyone interested.

The Hulktimate - GREEN goes GOLD!

Brilliant post/technique KJ2020! Thanks for chiming in. Good to know there is a safe and reliable epoxy technique for adding the dial feet. The thought of having to apply heat anywhere near the dial definitely seemed a bit high risk.

bertieng · 17/5/21

KJ2020 said:
Soldering on new dial feet is a high level skill that few people will master. Using epoxy to glue new feet in place is a safe and reliable alternative that is much less difficult and less risky - a dial can be scorched while soldering. Also when gluing there is no need to precisely locate the new feet positions since the feet are already in place in the movement when the dial is set.

I describe the process in detail in the thread linked below for anyone interested.

The Hulktimate - GREEN goes GOLD!

For those who can solder, you have my admiration! If you can't, join the club - there's still hope for the rest of us.

This is a great found. Thanks a lot KJ2020
I have been using those dial dots which are far from satisfactory.

Watchguy369 · 17/5/21

vipstyle888 said:
https://youtu.be/BSZ3eRWOdgM

Here's a gen vs rep comparison. I'm just assuming this is a Noob

Yes its a Noob.
(Its been said on her Mans YT Channel which is the same video basicly but in german

)

Markaplan · 17/5/21

Hello everyone.

I am about to buy a noob v4 daytona black dial from a friend. I want to mount a CF bezel on it. I asked my TD and he told me it’s hard to get one because of the raids.
Anyone knows how I can get one? Any advise will be appreciated. Thank you in advance.

Sent from my iPhone using Tapatalk

srhoque · 17/5/21

Markaplan said:
Hello everyone.

I am about to buy a noob v4 daytona black dial from a friend. I want to mount a CF bezel on it. I asked my TD and he told me it’s hard to get one because of the raids.
Anyone knows how I can get one? Any advise will be appreciated. Thank you in advance.

Sent from my iPhone using Tapatalk

Check with thrillofhunt or Rubberman . I have purchased parts from them before. If no one has it, it maybe prudent to just wait until supply situation improves.

Markaplan · 17/5/21

srhoque said:
Check with thrillofhunt or Rubberman . I have purchased parts from them before. If no one has it, it maybe prudent to just wait until supply situation improves.

I will contact them now. Thank you

Sent from my iPhone using Tapatalk

Bobi01 · 17/5/21

Markaplan said:
I will contact them now. Thank you

Sent from my iPhone using Tapatalk

Or just enjoy bro with v4 bezel,cf is sometimes maybe brighter and superior but v4 is also good when is new

Shany · 18/5/21

I dont know why, ive had a daytona Franken for myself. Now ive Seen one in m2m.

Is it me or Even with Full Franken the Dimensions and the entire Form is typically still noob style.

Iam nur sure if the Most of you know what i mean...

Pizzo · 18/5/21

https://forum.replica-watch.info/fo...sa-arf-o-noob-per-un-buon-daytona-vediamo-chi

Pizzo · 18/5/21

Shany said:
I dont know why, ive had a daytona Franken for myself. Now ive Seen one in m2m.

Is it me or Even with Full Franken the Dimensions and the entire Form is typically still noob style.

Iam nur sure if the Most of you know what i mean...

you are definitely right. see the link ...

Markaplan · 18/5/21

Robi01 said:
Or just enjoy bro with v4 bezel,cf is sometimes maybe brighter and superior but v4 is also good when is new

Thank you

Sent from my iPhone using Tapatalk

r2d22 · 19/5/21

Is there still way to get a noob v4 now in view of the recent raid?

Noob V4 Daytona's

Respected Member

Respected Member

Active Member

I'm Pretty Popular

Known Member

Respected Member

Time Traveler

I'm Pretty Popular

Renowned Member

I'm Pretty Popular

Mythical Poster

Active Member

Respected Member

Active Member

Respected Member

Active Member

Getting To Know The Place

Getting To Know The Place

Active Member

Do not accept unsolicited offers