-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
NOOB Pepsi GMT 126710 BLRO mini review
- Thread starter m5smg2
- Start date
- 13/6/15
- 2,412
- 1,772
- 113
The lume does not match as the noob hands are brighter than the gmf dial. It doesn't bother me as much as I don't tend to use my watch at night. It's not worth the investment of reluming them to match, at least for me.
Last edited:
I am rolling with the Noob Pepsi timebomb and upgrading to a prof xtal. If the movement craps out, I’ll ask you guys for a modder who I can send my paperweight to for a replacement. Rolling the dice!
- 13/6/15
- 2,412
- 1,772
- 113
Does anyone know if there is a color change in the insert between first and late versions?
Thanks in advance
Thanks in advance
- 12/3/18
- 34,663
- 66,754
- 113
Running strong
Good to know bro, I was going to ask you before posting a repair thread.
- 12/3/18
- 34,663
- 66,754
- 113
Not that I've seen, but the insert can look quite different in various lighting.
- 13/6/15
- 2,412
- 1,772
- 113
People had said there was but I don’t think it’s too far off from each other. Still well made inserts
- 13/6/15
- 2,412
- 1,772
- 113
- 13/6/15
- 2,412
- 1,772
- 113
GMF, just for comparison. I was surprised the insert markers are WHITE, I've already dug them out in prep for a paint mod
Take a pict of the insert from the back if you can, thanks.
- 12/3/18
- 34,663
- 66,754
- 113
GMF insert fun.
This is an interesting approach to a bicolor ceramic from our Chinese watchmaking wizards and makes perfect sense. The insert base is all blue, then it has a notch on the red side that fits a thinner stairstep piece that was separately molded in red. The white lines we see at the joints are from glue, no doubt epoxy. Nearly all of it can be scraped away, and/or covered up with a paint pen. This insert construction requires that the cutouts be more shallow than the Noob, and is probably why they used white paint filled to the tops of the cutouts. I am confident I can do a nice looking silver paint mod to it, same as an aftermarket one now.
- 12/3/18
- 34,663
- 66,754
- 113
The 6 looked kind of bad in that last pic. I went over all the cutouts again with a fresh sharp point. Ready for paint now!
Look at the much-better transition point on this example:
https://www.youtube.com/watch?v=awZSwczj_T8
https://www.youtube.com/watch?v=awZSwczj_T8