-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
New PPF 5712 with PP240 Super Clone.....
- Thread starter dharma
- Start date
I have the CNC case in my build , will report back once I receive the watch. But the CNC case is gen spec construction. It is very troublesome from a watchmaker's perspective. You will need to remove the top case to remove the dial and then remove the screws holding back to caseback
CNC case only fits the ACE movement or a gen cal240 AFAIK. Alvin will probably correct me if im wrong, but this is what I heard
The normal movement fits it too.
The advantage of the CNC Case is just 1. Gen spec thickness. The way they construct the case to gen specs has allowed them to be Gen spec thickness at around 8.5-8.6. PPF stock case is around 9- 9.2mm. Visually, it is indistinguishable.
The difference is in the case. The ppf /zf case employs a screw down case back which the drawback is that it will be thicker as they need the thickness to create the screw threads.
The advantage of the CNC Case is just 1. Gen spec thickness. The way they construct the case to gen specs has allowed them to be Gen spec thickness at around 8.5-8.6. PPF stock case is around 9- 9.2mm. Visually, it is indistinguishable.
The difference is in the case. The ppf /zf case employs a screw down case back which the drawback is that it will be thicker as they need the thickness to create the screw threads.
stock v2 fits? Alright well TIL- thanks for the updated infoThe normal movement fits it too.
The advantage of the CNC Case is just 1. Gen spec thickness. The way they construct the case to gen specs has allowed them to be Gen spec thickness at around 8.5-8.6. PPF stock case is around 9- 9.2mm. Visually, it is indistinguishable.
The difference is in the case. The ppf /zf case employs a screw down case back which the drawback is that it will be thicker as they need the thickness to create the screw threads.
- 27/5/22
- 3,415
- 4,594
- 113
Just back from getting the new moon disc installed.
Sexy!Just back from getting the new moon disc installed.
What mods did you do on it?
just set it according to this
- 25/9/22
- 6,030
- 16,443
- 113
I believe its true moonphase but tbh I never bothered to check lmao
I know this page, thanks. I just wanted to know, how often I have to adjust the moon phase disk to the real moonphase. Ok, I will see
BIONONE
Respected Member
- 28/4/17
- 3,627
- 2,817
- 113
It is a clone that's why he sent you the pp website. You can expect it to work like the gen - otherwise the whole mechanism would come out of balance.
mistermagoo
Active Member
- 9/8/17
- 360
- 147
- 43
- 25/9/22
- 6,030
- 16,443
- 113
Actually the rumor is that they will never make it too perfect otherwise they'll crack down. They want a rep you can fool people with but not scam with.
They make it 90% of the way there and let modders do the rest.
There's many mods for it anyways if you want a swap.
- 25/9/22
- 6,030
- 16,443
- 113
Well from non TDs this piece costs the same as a Clean GMT so lmao we get butchered for it
ZF also is just generally known for inflated margins lmao