How would you build a 6542 Albino GMT-Master?

[atgm]

Are the rep inserts bakelite or what?

I never knew I wanted one of these until this thread -- thanks, guys.

 

[nikoel]

Are the rep inserts bakelite or what?

I never knew I wanted one of these until this thread -- thanks, guys.

Others will be able to say so definitely but from what I understand yes, but some cheaper options are a different plastic.
Now if someone with Geiger Counter can tell me if they are radioactive that should tell us how truly authentic the rep-makers have become... Radium inside your watch... Mmmmmm :/

 

[Daft_Punk]

Are the rep inserts bakelite or what?

I never knew I wanted one of these until this thread -- thanks, guys.

Welcome to a whole world of pain .. not sure thank you is the right expression as should be damn you

 

[atgm]

Others will be able to say so definitely but from what I understand yes, but some cheaper options are a different plastic.
Now if someone with Geiger Counter can tell me if they are radioactive that should tell us how truly authentic the rep-makers have become... Radium inside your watch... Mmmmmm :/

I've always been surprised that rep-makers don't go for tritium markers given the lax safety restrictions... though I guess lume is just cheaper.

 

[Daft_Punk]

Are the rep inserts bakelite or what?

I never knew I wanted one of these until this thread -- thanks, guys.

Not sure if they are exactly the same materials but same effect ... couple of sources for these as a member on RWG was making the whole assembly and insert

This if from flea bay but not sure if still available

 

[Daft_Punk]

It's a bit more expensive but this will be a good purchase. It comes with a free insert, crown, tube, movement, bracelet and crystal as well - http://www.ebay.com.au/itm/VINTAGE-...050803?hash=item1c821d6cf3:g:O3UAAOSwWxNY0--Y

Was thinking this version a few more bucks but hey its only $$$

http://www.ebay.com/itm/ROLEX-VINTA...-NO-CROWN-GUARDS-AUTOMATIC-1958-/152358903507

 

[nikoel]

Was thinking this version a few more bucks but hey its only $$$

http://www.ebay.com/itm/ROLEX-VINTA...-NO-CROWN-GUARDS-AUTOMATIC-1958-/152358903507

What about this...? http://www.ebay.com/itm/ROLEX-6036-...273118?hash=item2ef411589e:g:mv0AAOSwCypWoWo9


Just when I thought this thread was dead! Love our shenanigans btw


EDIT: He could have at least offered free shipping. :megalol:

 

[Daft_Punk]

What about this...? http://www.ebay.com/itm/ROLEX-6036-...273118?hash=item2ef411589e:g:mv0AAOSwCypWoWo9


Just when I thought this thread was dead! Love our shenanigans btw


EDIT: He could have at least offered free shipping. :megalol:

Was going to grab that one but looking for a better condition dial I prefer NOS look

 

[Daft_Punk]

I'm a couple of G's in on the build that Yodog posted above and I will say that doing this thing right isn't cheap. Some of us demand a higher level of aesthetic so there is value in throwing money at the build.

@TheSociety builds pieces that are beyond what most of us want or are willing to pay for but that's his passion. If you take the gen movement out of the equation you can have a piece that's 80% to 90% there on the level of appearance for $2,000ish. Just my opinion though.

The slippery slope of doing this build ... hmmmm back and forth on accuracy vs bucks vs how much I want one

 

[atgm]

The slippery slope of doing this build ... hmmmm back and forth on accuracy vs bucks vs how much I want one

That's where I'm standing too... cheap case, movement, hands, good bezel and dial? Then replace the movement/hands when you have cash, then the case...

 

[nikoel]

That's where I'm standing too... cheap case, movement, hands, good bezel and dial? Then replace the movement/hands when you have cash, then the case...

If you have 5min - this is very relevant http://theoatmeal.com/comics/house (get to the end; you'll see)

 

[Daft_Punk]

That's where I'm standing too... cheap case, movement, hands, good bezel and dial? Then replace the movement/hands when you have cash, then the case...

Cheap case to start is the Silix big crown sub case .. these builds were done on RWG while ago
https://rwg.cc/topic/80954-6542-gmt-master-project-update/

 

[TheSociety]

I don't blame you guys! If you're not cursed with the gen movement bug you'll save quite a bit. However I will say that it's worth the $. Gen parts will Never lose value!


It doesn't just tell time. It tells history.
Genuine Movement Rolex Builds Thread

 

[Daft_Punk]

I don't blame you guys! If you're not cursed with the gen movement bug you'll save quite a bit. However I will say that it's worth the $. Gen parts will Never lose value!


It doesn't just tell time. It tells history.
Genuine Movement Rolex Builds Thread

If we all went the way of @TheSociety then we would have nothing left to aspire too ... your builds always inspire me in execution, taste and quality

 

[TheSociety]

If we all went the way of @TheSociety then we would have nothing left to aspire too ... your builds always inspire me in execution, taste and quality

Much appreciated brother!


It doesn't just tell time. It tells history.
Genuine Movement Rolex Builds Thread

 

[Daft_Punk]

@Bart Cordell we need your input here, saw your amazing work posted in vintage watches!

 

[alligoat]

One option on the case is to get the cartel 1655 Explorer from Josh and shave off the crown guards. The case will take the T-116 and then you just have to get a retaining ring, bezel and the insert. The DG3804 movement is decent and low beat. This is what Joey B did over at RWG. Joey also used to make the bakelite inserts- don't know if he still does, but they were good quality. At that point you can build a 6542 for $750-1000.

 

[Daft_Punk]

One option on the case is to get the cartel 1655 Explorer from Josh and shave off the crown guards. The case will take the T-116 and then you just have to get a retaining ring, bezel and the insert. The DG3804 movement is decent and low beat. This is what Joey B did over at RWG. Joey also used to make the bakelite inserts- don't know if he still does, but they were good quality. At that point you can build a 6542 for $750-1000.

Roger that was on the same path my self ... if JoeyB isnt making the assemblies any longer is there any other coin edge bezel assembly solution other than Phong / MQ ? be good if yuki would just sell the assembly as an option

Guessing the 1655 will not take the Silliz sub bezel ?

 

[ward1991]

One doesn't simply build a 6542, the 6542 destroys your life and then kicks you in the teeth when you're down.

Sent from my SM-G950U using Tapatalk

 

[Daft_Punk]

One doesn't simply build a 6542, the 6542 destroys your life and then kicks you in the teeth when you're down.

Sent from my SM-G950U using Tapatalk

.. well nothing to lose then