Clean Factory Batman

[King22]

The only other issue I have come across is the bezel is ever so slightly out of alignment at 12 o’clock. It’s not enough to annoy me though lol.


Sent from my iPhone using Tapatalk

Mine also has a misaligned bezel at 12 o'clock. Did you find a fix ? Maybe taking the bezel off and fitting it on again ?

 

[Max1978]

Today my Batman arrived ... mine also has a bezel that is not aligned !! how do you disassemble it to align it?

 

[jpereira88]

Not sure why but i had a slight speed bump issue on my cf at 6 and after the platinum mod it went away ????‍

 

[RiffRalf]

Mine also has a misaligned bezel at 12 o'clock. Did you find a fix ? Maybe taking the bezel off and fitting it on again ?

I would just switch off the magnification setting on my bionic eye. Much less work

 

[Tiger4]

I had the same issue on my bezel not being aligned. Removed the bezel and tried to realign it, it did not work. The three prongs that holds the bezel is fixed.

Mine also has a misaligned bezel at 12 o'clock. Did you find a fix ? Maybe taking the bezel off and fitting it on again ?

 

[bertieng]

I had the same issue on my bezel not being aligned. Removed the bezel and tried to realign it, it did not work. The three prongs that holds the bezel is fixed.

Not just by removing the bezel, it will do nothing for correcting the alignment.
You need to remove the insert for a proper alignment.

 

[Max1978]

Not just by removing the bezel, it will do nothing for correcting the alignment.
You need to remove the insert for a proper alignment.

Bertieng can you please tell me how to remove the insert?

 

[Rworry]

Ordered one, can't wait for QC!

 

[Richard80]

Ordered one, can't wait for QC!

A Batman? I wait since 2 month ...

 

[Tobel]

Ordered one, can't wait for QC!

Last I heard CF had put the manufacturing of their batman on hold until they fix the insert. Lets us know if you get one

 

[bertieng]

Bertieng can you please tell me how to remove the insert?

For CF GMTs, the inserts are just taped onto the bezel. You can pry it off carefully with a sharp cutter.

 

[Max1978]

For CF GMTs, the inserts are just taped onto the bezel. You can pry it off carefully with a sharp cutter.

Thanks for the advice ... tonight I'll try to take it off

 

[King22]

Thanks for the advice ... tonight I'll try to take it off

Please give an update if successful or not...

 

[Max1978]

The cutter I had at home was too big .. the blade did not fit into the insert !! I'll get one with the smaller blade

 

[bertieng]

The cutter I had at home was too big .. the blade did not fit into the insert !! I'll get one with the smaller blade

Get one of those modeller's cutting blades like X-acto. They are small and very sharp.

 

[Max1978]

Get one of those modeller's cutting blades like X-acto. They are small and very sharp.

I will try to insert the blade between the insert and the glass

 

[bertieng]

I will try to insert the blade between the insert and the glass

Nooooo, remove the bezel and and do it from underneath

 

[Max1978]

But does the frame come off like in 16610? inserting the blade between the frame and the case?
Thanks so much for your help

 

[AlphaProt]

But does the frame come off like in 16610? inserting the blade between the frame and the case?
Thanks so much for your help

yes it does. but be very very very careful as the ceramic rolex bezel (GMT, sub) have this white rubber ring (hytrel ring) inside the bezel, which can be damaged if not careful. If damaged, you will have a lot of difficulties putting the bezel back on and making sure it stays nice and tight like a virgin lady.

 

[Max1978]

I did it!!! thanks to those who helped me