muiramas
Aristocrat
- 18/1/17
- 5,977
- 7,763
- 113
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
ARF SD43 904L 126600 review (many pics)
- Thread starter m5smg2
- Start date
Hi Garbancillo, TD was InTime. Great and easy to deal with!
- 24/3/17
- 2,772
- 1,389
- 113
SD43 RubberB strap
Looks awesome, easy to install? Can that be done by any watchsmith?
Sent from the RWI App
- 23/8/07
- 6,471
- 8,424
- 113
Devinthedoc
Known Member
I been reading this thread and having the curiousity about my 7.2 wrist accommodating this. Can someone send me their dusty sd43?!?! 
I been reading this thread and having the curiousity about my 7.2 wrist accommodating this. Can someone send me their dusty sd43?!?!
I have a 7 wrist and the watch is perfect. Could easily wear a DEEPSEA 44mm too. The sub was too small for me.
matzekatze
Getting To Know The Place
- 27/11/16
- 35
- 21
- 8
I’ve had the 126600 for a little while, and just got it back from Vac. Got a spa service and a Prof Crystal installed. I didn’t think this thing could look any better...now was I wrong! Looks so much better without that cyclops.
Now I’m going to want these crystals on all my watches.
Thanks
vaccum prof
Did you also change the datewheel?
Sent from the RWI App
I did not. That’s my next task. To be honest, without the cyclops, you really don’t notice it too much as it isn’t magnified.
rayz20
Renowned Member
- 29/6/17
- 577
- 152
- 43
- 1/8/17
- 1,890
- 702
- 113
- 24/3/17
- 2,772
- 1,389
- 113
My bezel isn't tight enough, it is too loose
read this
https://forum.replica-watch.info/forum/rolex-tudor-replicas/6776690-arf-126600-v2-updated-bezel
- 1/8/17
- 1,890
- 702
- 113
Thank you - I already did and even extended the springs but it is still quite loose
I have been meaning to post this but haven’t had the time. I was able to successfully address two issues with the bezel my watch was plagued with as well.
1. The low sitting of the spring. By stretching them to the correct height.
This also includes the position of the click spring between 7 and 8. The noob has a much cleaner fitting button unlike the ARF. You are able to rotate this a bit for better contact.
2. The second issue is with the plastic retaining ring not providing enough tension to give it a more solid feel. For this I used silicone and coated the entire ring. No need to glob this on, a little will solve the issue by giving the right amount of sticky tension. Since this stuff is waterproof it won’t harm anything.
I have been rotating the bezel everyday and honestly it’s 100% solved for me and couldn’t be happier now.
Give it a try and if it works as well as it has for then I am happy to have helped. If not then it didn’t cost you anything ????
Guys, can you please help we with these QC pics? What do you think?
I'm not fully convinced by the date alignment and the magnification. Do you notice other big flaws? Thank you
I'm not fully convinced by the date alignment and the magnification. Do you notice other big flaws? Thank you
- 1/8/17
- 1,890
- 702
- 113
I have been meaning to post this but haven’t had the time. I was able to successfully address two issues with the bezel my watch was plagued with as well.
1. The low sitting of the spring. By stretching them to the correct height.
This also includes the position of the click spring between 7 and 8. The noob has a much cleaner fitting button unlike the ARF. You are able to rotate this a bit for better contact.
2. The second issue is with the plastic retaining ring not providing enough tension to give it a more solid feel. For this I used silicone and coated the entire ring. No need to glob this on, a little will solve the issue by giving the right amount of sticky tension. Since this stuff is waterproof it won’t harm anything.
I have been rotating the bezel everyday and honestly it’s 100% solved for me and couldn’t be happier now.
Give it a try and if it works as well as it has for then I am happy to have helped. If not then it didn’t cost you anything ????
Great ! Thank you very much, i will try it and let you know!
Hey guys, just pulled the trigger from a td here on this watch. Can anyone verify if it is in fact a v2 for me? Thanks
Last edited: