Again about Hytrel ring

[antonygr]

Im search table with parameters ring for rolex watch. These parameters are not the same as on AliExpress. I'm talking about rolex submariner 116610.
On ali ring size 31.9*0.7*0.3. from table size 31.9*0.65.065. where is right?

 

[KJ2020]

The table should be correct

 

[antonygr]

Yes shure. Part. 316-116710-1

 

[KJ2020]

Yes shure. Part. 316-116710-1

I would believe the table if it's from a reputable source.

NEW Rolex 316-116710-1 Bezel Gasket Genuine GMT Submariner 116610 114060 x2pcs | eBay

Original Bezel Gasket - Genuine Bezel Gasket. Arriwatch - Watches & Parts. “IT IS SPECIFIED THAT THE PHOTOS ARE IN MACRO, SO THE DEFECTS WHICH APPEAR VERY VISIBLE ARE NEGLIGIBLE IN REALITY”.

www.ebay.com

 

[KJ2020]

A piece of fishline long enough to make a bezel gasket costs less than a penny.

Using fishline as a hytrel ring

 

[antonygr]

Ok. what parameters should there be?

 

[antonygr]

Thick and height. What parameters have rolex?

 

[KJ2020]

Thick and height. What parameters have rolex?

Follow the link I posted for advice on choosing a fishline size. Rep bezel grooves vary in height and depth plus a hytrel ring is a different shape than round so sizes are not really interchangeable.

 

[antonygr]

Im open vsf bezel and look size

 

[antonygr]

I read your guide. everything goes to the fact that the size should be 0.65 as original ring

 

[antonygr]

I ordered a ring on Alibaba, material hytrel with Rolex parameters. I wonder what to get out of this.

 

[antonygr]

First model vsf have hard moving bezel. Now he play

 

[KJ2020]

I ordered a ring on Alibaba, material hytrel with Rolex parameters. I wonder what to get out of this.

Can you post a link? Sometimes the aftermarket gaskets work on some reps, other times not. Also please report back if it works, others may benefit.

 

[antonygr]

Clean factory v4 used Hytrel without play bezel

 

[antonygr]

Im buy 10 vsf 116610. Only 2 or 3 have hard moving bezel

 

[KJ2020]

Im buy 10 vsf 116610. Only 2 or 3 have hard moving bezel

Sometimes that can be corrected by flipping the hytrel upside down. There is a correct vertical orientation which can be mistaken at the time of factory install.

 

[antonygr]

You say about set under press, non hands?))

 

[KJ2020]

Info and pics in this thread

6-digit Sub crystal and bezel swap

 

[antonygr]

I periodically receive 10-20 hours of vsf Submariner 40mm. and they all have bezel paly. It seems to me that there are some problems in the production of VSF or those who produce rings for them. The very first copies that I have do not have such problems. How can this information be conveyed to vsf?

 

[antonygr]

Maybe this is a wear problem of the mechanism that produces these rings? Over time, everything wears out. and requires replacement.