The Ultimate Daytona Buying Guide (Ref. 116520/116500)

[Minome]

although it's "locked in"

Screwed out in the ready position to start/stop?
or screwed in as non chrono fuction?

I think you mean you screw it out (to use the chrono) then it rotates.
If that's the case, you are correct and it can be the inner pin/screw that is loose.
Just replaced my pushers for Gen, and apparently there's a fine line between too mush screwed in (i mean the inner pin) you cant use the pusher, and too lose, the pusher just turns.
I'm no expert by any means, i'm doing my first franken project. I am sure there's plenty more peeps that can intervene and give more experienced opinion.

Speaking of which:

Is it still valid that the ARF bracelet is a must?

Optional parts:

• ARF bracelet and clasp (150€)

 

[wildkid]

Screwed out in the ready position to start/stop?
or screwed in as non chrono fuction?

I think you mean you screw it out (to use the chrono) then it rotates.
If that's the case, you are correct and it can be the inner pin/screw that is loose.
Just replaced my pushers for Gen, and apparently there's a fine line between too mush screwed in (i mean the inner pin) you cant use the pusher, and too lose, the pusher just turns.

What I meant was once the pusher is supposedly screwed in all the way (cannot actuate start/stop anymore), the pusher itself can still endless rotates clockwise.

You're right about the inner pin (I think).

 

[Minome]

What I meant was once the pusher is supposedly screwed in all the way (cannot actuate start/stop anymore), the pusher itself can still endless rotates clockwise.

I would suggest you to unscrew the pusher to the working position, then tighten the inner pin a bit more.
Cos after its screwed in, it shoudnt rotate anymore.
If you take the movement out, check if the inner pin is rotatin when you rotate the pusher.

 

[GoProHero]

BTF with gen crystal and CF V3 dial. Wondering if I should go with gen hands, crown, pushers, bezel lol, or leave as is!

 

[Tompa]

BTF with gen crystal and CF V3 dial. Wondering if I should go with gen hands, crown, pushers, bezel lol, or leave as is!

I have exactly the same setup, its an awsome watch mate. Im thinking of gen hands, and if i have the money a gen bezel to, then its complete i think gen hands is a must. White gold vs steel.. different shine,

 

[frankdux1987]

BTF with gen crystal and CF V3 dial. Wondering if I should go with gen hands, crown, pushers, bezel lol, or leave as is!

Where did u get the oysterflex from mate? I need to buy one but begrudge paying stupid prices from the dealers

 

[flashu]

I did this beside the pu

I have exactly the same setup, its an awsome watch mate. Im thinking of gen hands, and if i have the money a gen bezel to, then its complete i think gen hands is a must. White gold vs steel.. different shine,

This is before and after

Stock setup






After Gen

 

[pinoyako04]

BTF with gen crystal and CF V3 dial. Wondering if I should go with gen hands, crown, pushers, bezel lol, or leave as is!

I have btf black dial too, Is it worth it to change my dial to clean v3? Is btf shiny subdial really different to gen black dial? Or its acceptable..

 

[GoProHero]

Where did u get the oysterflex from mate? I need to buy one but begrudge paying stupid prices from the dealers

JTime

 

[frankdux1987]

I have btf black dial too, Is it worth it to change my dial to clean v3? Is btf shiny subdial really different to gen black dial? Or its acceptable..

Yes its a must trust me

 

[pinoyako04]

Yes its a must trust me

how much will it cost for the clean dial if you dont mind? where can i get it? from tds?

 

[frankdux1987]

how much will it cost for the clean dial if you dont mind? where can i get it? from tds?

I got mine from jtime, it worked out to £150 total including shipping

 

[pinoyako04]

I got mine from jtime, it worked out to £150 total including shipping

Just ordered! cant wait to see my btf case with V3 clean dial hope its worth it ❤ thanks

 

[frankdux1987]

Just ordered! cant wait to see my btf case with V3 clean dial hope its worth it ❤ thanks

You wont be disappointed

 

[wildkid]

How's the quality of rep Oysterflex these days?

 

[EdenAlando]

how much will it cost for the clean dial if you dont mind? where can i get it? from tds?

I got mine fr chazing times at a very good price...Good people there!

 

[pinoyako04]

You wont be disappointed

here’s mine! btf case with clean v3 dial, i thinking of going to deep crystal, is it worth it..btf crystal to deep crystal, because my btf crystal has light scratches due to double AR,
which is clearer? btf xtal or deep? much closer to Gen spec.

 

[pinoyako04]

I got mine fr chazing times at a very good price...Good people there!

got mine! really love it! absolutely worth the upgrade..no more shiny subdials

 

[KingSly]

I just replaced both my new CFs with Deep crystals. It’s non negotiable for me at this point.

Where did you source them from if you don't mind me asking

 

[e1phantom]

Where did you source them from if you don't mind me asking

Directly from Patrick.