- 28/5/13
- 170
- 8
- 18
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
Where is BK?
- Thread starter Bsay
- Start date
- 25/9/22
- 8,201
- 22,834
- 113
Well, enjoy. Rolex reps have come a long way since BK and now are insane OOTB. VS, Clean (ZZF) are killing it. GMF if you want Daydates. Good luck.
- 28/5/13
- 170
- 8
- 18
- 28/5/13
- 170
- 8
- 18
Really appreciate the info, you saved me HOURS of reading to try and catch back up.
- 25/9/22
- 8,201
- 22,834
- 113
- 28/5/13
- 170
- 8
- 18
- 25/9/22
- 8,201
- 22,834
- 113
Pepsi GMT - Clean is king, they murdered the scene with the new v3 insert. Still small issues such as poor bezel action but the new clone 3285 movement just murders the competitionAll of them. I would like to get a Pepsi GMT, a Deepsea and 1-2 Daydates.
Clean GMT-II Pepsi updated bezel insert V2/V2s review and comparison
Hi members! After months of hard working, Clean has finally brought us this updated/color-corrected Pepsi bezel with red tone under UV light. The most obvious update must be the red part of the insert, we used to consider Clean’s V1 insert a bit too red than gen, it’s because Clean...
forum.replica-watch.info
Daydates - GMF, now there's tungsten technology to mimic the weight of PM, very cool
GMF Day-Date 40mm Tungsten Heavy Version
JTime listed a bunch of GMF DDs as Tungsten Heavy Version. It appears they have but some tungsten inside to get the weight closer to the Gen. Anyone have more information about that...
forum.replica-watch.info
Deepsea... I'm not an expert but there's no definitive king right now, it seems to be a mixture of modding. a DSSD expert would help but I would read this thread (the last 20 pages)
"Official DSSD Club"
OK, it's not really "Official" but if you own one and luv it, post a pic! If you can remember, mention which V, what movt' & what mods. Here is mine: "Ultimate" with an ETA 2836 & "correct 10" bezel mod...
forum.replica-watch.info
What about a rolex submariner? I Think the 40mm is a little small so would like the 41 on that model. Do They also make this model as good as the Pepsi?
Hi and welcome back to RWI! Glad to have old members show up again. @Reaps gave you a helluva head start, enjoy the hunt.
Since it's been some time, some rules have changed, you may want to refresh a bit your forum knowledge.
Please take some time to read the sticky threads in the new members area (all subsections), learn the basic forum rules and get some very good advice in the process. A number of questions has already been answered there, this is just an example:
Quick links to some of the more prevalent rules of the forum.
The First Constitution of RWI https://forum.replica-watch.info/for...itution-of-rwi QC Rules https://forum.replica-watch.info/for...tle-on-qc-pics https://forum.replica-watch.info/for...of-qc-pictures Glamour pics https://forum.replica-watch.info/for...r-pics-and-rwi Multiple Accounts...
forum.replica-watch.info
As a new subscriber, you've already been directed to this thread, please read carefully and look through the linked additional threads:
You are welcome
If you've just joined and are reading this, welcome to RWI. If you are having issues with posting and sending PMs please log out and in again. If still no joy, log out, clear cache and RWI cookies and log in again, this will fix the issue. If you stop here, or read just the next few lines...
forum.replica-watch.info
Another good thread to read to understand where RWI comes from and some fundamentals is this:
Most of the information you need to know to start is there. If you're preparing to buy, read the stickies before ordering. When you're finished, you can continue learning by reading the stickies in all remaining sections. If it's stickied, it's important information.
If you intend to sell, read the sales rules and all stickies in the sales section with particular care and make sure you understand each single rule. Sales rules infraction is taken very seriously here. As a new member you are not eligible to sell. Using the sales section is a privilege, eligibility must be earned, make sure you know and understand how.
For anything else, feel free to reach out to @eBoy or me, we're happy to assist, advise, direct, explain. Don't hesitate.
Don't be afraid to post noob questions in the new members area. In doubt, use the flame free zone. If you feel uncomfortable anywhere in the new members area, please reach out to @eBoy or me. Mutual respect is of utmost importance to us. On the other hand, we're grown-ups and are supposed to be able to deal with a bit of irony, don't take it personally, ever, a bit of irony never harmed anyone. If you laugh at jokes, you'll make friends faster.
This forum is a treasure trove of information and benefits from the engagement of all members who take their time to share their knowledge, help each other out and have some fun. We hope that you'll benefit and enjoy this platform as well as contribute positively to it.
If at any point you feel to contribute also on another level, feel free to pm the boss (trailboss99) to become a supporter and get some little perks with the status (editing rights, for example).
Enjoy the forum.
Hello @Bsay , I’ve been in the exact same situation: I bought a Submariner from BK about 5-6 years ago. I had to send it back to him maybe 2 times at most—once due to a water issue, and the other time I can’t quite remember. Each time, BK fixed it quickly and was very responsive via email. The watch has been working perfectly all these years otherwise. BK was truly a beast!
I came back here because yesterday, the 1:30 PM index came off after the watch fell a couple of times. So, I was looking for BK’s contact details, but if he’s retired, I respect that. I’m extremely satisfied with his work—he deserves it!
Thanks, @Reaps , for your feedback. It will also help me get back into the loop if I decide to get a new one. I’ll look into it!
I came back here because yesterday, the 1:30 PM index came off after the watch fell a couple of times. So, I was looking for BK’s contact details, but if he’s retired, I respect that. I’m extremely satisfied with his work—he deserves it!
Thanks, @Reaps , for your feedback. It will also help me get back into the loop if I decide to get a new one. I’ll look into it!
