Anyone can tell me what part I need ??
I lost a pin on middle I think it is secound pin
3135-360 Second wheel. A gen one won’t fit unfortunately.
Last edited:
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
Vr3135 tear down and cleaned.
- Thread starter occb2
- Start date
3135-360 Second wheel. A gen one won’t fit unfortunately.
Enigmacpl03
Active Member
Does anyone know if a gen Automatic module would fit the VR movement? I was looking in doing a hybrid build.
saucin
Renowned Member
- 20/4/20
- 587
- 577
- 93
Will try it soon
Have you tried this yet? I was thinking about swapping out the balance bridge myself, curious if it worked for you.
Sent from my iPhone using Tapatalk
- 11/8/18
- 843
- 175
- 43
- 12/3/18
- 32,923
- 59,571
- 113
thanks, but need a broken movement or similar... any other option? maybe the SA3135?
- 12/3/18
- 32,923
- 59,571
- 113
Positive. Gen seconds wheel pinion is too thick to pass through the jewel in the minute pinion.
Pull one from a broken VR or try gen cannon & minute pinion and gen seconds wheel. I have no idea if the gen cannon pinion and minute pinion will fit and run without issue though in all honesty.
Great Information!!!
im getting a 116610 with vr3135 soon and thinking about making as stable as possible. I will be installing the autowind module 3135-145 and follow with the recommendations from this post. Can anyone help a newb out by providing the part number for the Date Change and the shock balance?
im getting a 116610 with vr3135 soon and thinking about making as stable as possible. I will be installing the autowind module 3135-145 and follow with the recommendations from this post. Can anyone help a newb out by providing the part number for the Date Change and the shock balance?
- 12/3/18
- 32,923
- 59,571
- 113