Vr3135 tear down and cleaned.

[bill33]

Anyone can tell me what part I need ??
I lost a pin on middle I think it is secound pin

3135-360 Second wheel. A gen one won’t fit unfortunately.

 

[Enigmacpl03]

Does anyone know if a gen Automatic module would fit the VR movement? I was looking in doing a hybrid build.

 

[heska]

It fits, but the whole assembly. Not sure for every parts but at least VR balance did not fit in the gen and vice versa

 

[saucin]

Will try it soon

Have you tried this yet? I was thinking about swapping out the balance bridge myself, curious if it worked for you.


Sent from my iPhone using Tapatalk

 

[Digital.]

Didn’t get round to it. Bought a gen main plate for the project

 

[wildrabbit]

Any updates on these?

 

[ginopino]

3135-360 Second wheel. A gen one won’t fit unfortunately.

are you sure about that? I also need this part: why the gen one will not fit?!?!?

 

[KJ2020]

are you sure about that? I also need this part: why the gen one will not fit?!?!?

ARF second wheel from SH works in a VR. At least in the GMT movements it does.

 

[ginopino]

ARF second wheel from SH works in a VR. At least in the GMT movements it does.

thanks, but need a broken movement or similar... any other option? maybe the SA3135?

 

[KJ2020]

thanks, but need a broken movement or similar... any other option? maybe the SA3135?

I would certainly try that, should be plenty of dead ones around.

 

[bill33]

are you sure about that? I also need this part: why the gen one will not fit?!?!?

Positive. Gen seconds wheel pinion is too thick to pass through the jewel in the minute pinion.

 

[ginopino]

Positive. Gen seconds wheel pinion is too thick to pass through the jewel in the minute pinion.

any suggestion to repair?

 

[bill33]

any suggestion to repair?

Pull one from a broken VR or try gen cannon & minute pinion and gen seconds wheel. I have no idea if the gen cannon pinion and minute pinion will fit and run without issue though in all honesty.

 

[Thinh911]

Great Information!!!
im getting a 116610 with vr3135 soon and thinking about making as stable as possible. I will be installing the autowind module 3135-145 and follow with the recommendations from this post. Can anyone help a newb out by providing the part number for the Date Change and the shock balance?

 

[KJ2020]

Great Information!!!
im getting a 116610 with vr3135 soon and thinking about making as stable as possible. I will be installing the autowind module 3135-145 and follow with the recommendations from this post. Can anyone help a newb out by providing the part number for the Date Change and the shock balance?

https://evergreenparts.de/spare-part...3175-3185-3186

 

[miami_YG]

Didn’t get round to it. Bought a gen main plate for the project

saucin red1 Curious if either of you ended up trying gen balance in VR3135?