Titanium watch project

[grebeck]

Davidsen, Gens were never Oxidised, that is just crazy mod people like us! Besides it's really DIY easy ... people might think you were selling a new kind of PVD case instead of TI models - which would be useful if you wanted to offer Oxidised cases, simply make TI cases, beadblast and oxi them, probably cheaper than actual PVD !

I tried it (just the case, not the dial of the 195):

http://replica-watch.info/forum/viewtop ... ght=pam195

My vote, White Dial PAM055 nobody reps that base and the GEN is rare to boot!

Enzo, was this one made in Ti?

Thanks!

 

[takashi]

@grebeck... the screw is loose.

 

[daytona4me]

grebeck has a screw loose?? I could have told you that!!! :lol: :twisted:

 

[grebeck]

@grebeck... the screw is loose.

With all the straps I've purchased from Elliot I have to be prepared! Seriously though I just pushed them in to see how it looked and take the picture, I've never worn the watch with that bracelet before.

 

[takashi]

Nice bracelet :lol:

 

[babola]

David, one little thing to note if you're after the 082 rep - the second hand is black, not white as with most other PAM Marinas.
8)

Babola, I don't know if your vision is a gift or a curse!

I wonder how long it would of taken me to notice that or if I would of ever noticed it!

When it comes all things reps...it's a curse...you never win
babola

 

[MET-Rx]

Where is the BASE love? 176H.

If you get a correct thickness (above and below lever) modern CG for this as well as the 177, you will sell a boat load!

Don't try to spread yourself too thin and make too many generations. Trying to make 1 CG design that will work for both the pre G and post will just make all of them less accurate.

I would concentrate on the later Ti series (G,H,I) because NO ONE has a excellent rep of these regardless of mods due to the CG thickness issue. If you do the CG correct, all else will fall in place.

Though I have wanted an 082 forever but never thought a rep would be made due to the color complexity of the blue dial as well as the detailed case back. You make one of these and I would have no choice but to get it! lol

 

[MET-Rx]

My vote, White Dial PAM055 nobody reps that base and the GEN is rare to boot!

Where the heck did that come from? I've only seen the 055 in Brown. That must be VERY rare.

 

[kruzer00]

82 and 89. On the GMT you would use the new Asian 7750 with GMT module which is in the 88 and 89. Should be readily available. 177/6 H too but only with the correct CG.

 

[moggio]

david, my vote will go for first thing is the beautiful 082, 036 then the last will be the 177h all swissss

 

[ssalxpanerai]

Davidsen, I am in for 172 Tantalium and 55 with 2 hands and brown dial. I would love if you could make the crown width 2.05 or 2.1 mm and make sure a correct lever on CG too.

 

[hooligan]

My vote, White Dial PAM055 nobody reps that base and the GEN is rare to boot!

Oooh! Oooh! I've been itching for a white dialed PAM. I vote for this one, too, Davidsen!!!!!

Good call, Enzo. :wink:

 

[pman]

A 176h would be nice. I'd sell the one I just bought from Joshua for yours Davidsen.

 

[d4m.test]

My vote, White Dial PAM055 nobody reps that base and the GEN is rare to boot!

Oooh! Oooh! I've been itching for a white dialed PAM. I vote for this one, too, Davidsen!!!!!

Good call, Enzo. :wink:

I concur..not enough white dialed PAMS..and this is a looker...with a nice FAT Ti crown..bella..

PAM 055 for my vote..

 

[davidsenjpn]

After careful consdieration,i have decided to finalise my prod list as follows:

1.111H
2.082
3.036
4.055 base dial brown
5.055 base white dial

Learned from the 111h dial fonts issue.I would like to show you all my dial artwroks on this with all
the color and font layout so that you can give me your comments on all these dials.
Sorry that i do not have the 111h dial artwork made as we have discussed this dial many times
already.

But i have prepared all the other dials.Pls study them and tell me if they are ok.

Also by next week,i will have some pre production runs samples of the titanium case,crown and CG
samples .Will make one samples and show you the prototype too.So that you can follow my
production plan all the way.

here you are

All dials are sauage dial with superlumed c3.

082 blue dial,it will have satin lines on the dial

036 brown dial

055 brown and while dials

Psl tell me if the fonts ,color of dial and layout etc are ok?

All comments are wellcomed.

Thank you

 

[hk45ca]

http://www.panerai.com/img/2/prodotti/dettagli/1066037841883_PAM00082_scheda1.jpg

82!

nail down the 177h and that 082 with the blue dial, use c1 instead of the green c3 lume with swiss movement and i will defiantly buy both of them. all i am waiting on now for the 111h is the dial fix and i am going to buy it.

build it and we will come. lol 8)

 

[hooligan]

Davidsen, I'm not the expert that some of these guys are, but I think those dials look great. Font style, spacing and positioning look good to me.

Let's wait and see what everyone else says.

BTW, put me on the list for the 082 and the 055 white dial right now. Just let me know when they're ready so I can send the PayPal! :wink:

 

[pzissimos]

Titanium Project

My vote is for the 177h. thanks davidsen.

 

[hooligan]

You can stop voting, Davidsen announced in the post above which models he would be making:

1. 111H
2. 082
3. 036
4. 055 base dial brown
5. 055 base white dial

:wink:

 

[takashi]

The brown and blue dial is gonna be mine!!! Excellent details David.

Perhaps the lume colour on 082 may not be C3. Check out on that.

The lume colour for 036 (Brown) can be vintage colour (the real one is made of Tritium).
@enzo: maybe you can comment further on 036 dial.