- 5/6/08
- 7,350
- 172
- 63
There is no rubber strap for the LMPO model. If you want to put one you will have to use from another omega model.
The one from the CrPO will sit higher since the CrPO case is thicker than the LMPO one.
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
Review Of The Month: April 2014 | Liquid Metal Planet Ocean from Marvellous Replica
- Thread starter Mr. Pap
- Start date
There is no rubber strap for the LMPO model. If you want to put one you will have to use from another omega model.
The one from the CrPO will sit higher since the CrPO case is thicker than the LMPO one.
No, I looked at all the photos and the OMEGA is bent in the middle. The O and the M are bent downwards. That would do my head in.
Sorry. I just read that it was wonky, not that it was bent. There seems to be a lot of these newer Omega reps with badly aligned or bent logos and lettering.
Edit: Just read the review again, and it just says the OMEGA is misaligned. To my eye it is actually bent between the M and E.
Edit: Just read the review again, and it just says the OMEGA is misaligned. To my eye it is actually bent between the M and E.
Yup, it just looks it went up and down... One of the things you have to look for when looking at QCs...
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- 5/6/08
- 7,350
- 172
- 63
My bad as it seems i used the wrong word. Logo is bent.
Anyway, thats a hit and miss guys as you can get a good one. I saw yesterday a QC with a perfect logo. You just have to be careful when you receive your QC pics about this specific issue.
Anyway, thats a hit and miss guys as you can get a good one. I saw yesterday a QC with a perfect logo. You just have to be careful when you receive your QC pics about this specific issue.
MrPap
i ever own ap diver and 15400, and why i do feel that my LMPO crown require more time to complete screw it in from winding position, and its tight compared to
ap diver which is same movement.
will it effect the movement performance because i ever read stuff like if we screw the crown to the max in some watch or movement, the power reserve
will reduce, and they said by not fully screw the crown in will fix the issue
please enlighten me on this
thanks
i ever own ap diver and 15400, and why i do feel that my LMPO crown require more time to complete screw it in from winding position, and its tight compared to
ap diver which is same movement.
will it effect the movement performance because i ever read stuff like if we screw the crown to the max in some watch or movement, the power reserve
will reduce, and they said by not fully screw the crown in will fix the issue
please enlighten me on this
thanks
- 5/6/08
- 7,350
- 172
- 63
MrPap
i ever own ap diver and 15400, and why i do feel that my LMPO crown require more time to complete screw it in from winding position, and its tight compared to
ap diver which is same movement.
will it effect the movement performance because i ever read stuff like if we screw the crown to the max in some watch or movement, the power reserve
will reduce, and they said by not fully screw the crown in will fix the issue
please enlighten me on this
thanks
As i also stated crown at the one i got need around 8,5 turns to fully screw in. I only tested the watch for a few hours but i didn't notice anything wrong with the movement, everything was working just fine...