Yes sir, I saw a few of them. I am just changing it on the rep because I feel it draws attention to the date window being to far to right.You may be interested to know that the older series rubberclads use the 2326/2840 movements and the cyclop is very reflective as well and the date font is also different from the H series one showed by flying tommy.
Below is an example.
Sent from my iPhone using Tapatalk
Yes sir, I saw a few of them. I am just changing it on the rep because I feel it draws attention to the date window being to far to right.
Not sure how it will look with the 2ar cyclops, but I am going to try it on one of these 2 that I bought.
Seems pretty good to me. But I usually put the 24mm diver strap on my AP reps.Guys, and what about this OffShore rubber strap? I own a gen Oysterflex, a RubberB and EverestBand too and rubber is of excellent quality. Is this AP rubber strap good too? Or does it feel cheap?
Skickat från min Sputnik satellit
In the worst case I could buy a gen movement for $4,000
Theoretically you can. But also set aside another $1500 or so for the case work to accommodate gen movement, and of course you will need a gen dial and gen datewheel.
Nothing inhibiting if you decide to get the gen movement, but be aware that it is not a plug and play for the gen movement and this stock rep watch.
Can you post a picture of the caseback from the back?And you should shave that caseback.. its BIG and verry top heavy. I hade the same problem. But its an easy fix. If you live in eu you can send the caseback to slaughter. It cost 80euro to fix it and the watch is totaly different in feeling. Totaly worth it if you ask me
Skickat från min Sputnik satellit
Is that after it was thinned?Sure
Skickat från min Sputnik satellit