Pam 688 ;))))))

[d4m.test]

Yeah I was going to get a v2 but I might just wait for the v2.5

 

[d4m.test]

Yeah I was going to get a v2 but I might just wait for the v2.5

V2. 5 is already available. Have a look at my QC a few posts before. Factory will just send to dealers whatever they grab so you need to specifically ask for the newer revision.

Sent from the RWI App

 

[buckkiller1]

V2. 5 is already available. Have a look at my QC a few posts before. Factory will just send to dealers whatever they grab so you need to specifically ask for the newer revision.

Sent from the RWI App

Hello could you please recommend the most reliable source

Sent from my XT1650 using Tapatalk

 

[d4m.test]

V2. 5 is already available. Have a look at my QC a few posts before. Factory will just send to dealers whatever they grab so you need to specifically ask for the newer revision.

Sent from the RWI App

I’m going to wait until I can source this one. I like the CG and lugs better on yours. I will probably wait until I can get it through a TD though. Thanks for sharing.

 

[d4m.test]

To anyone who has bought the PAM688 VSF.

Check the screw on the buckle. My watch dropped off my wrist this morning as the screw was loose and fell out. Luckily I was sitting on a sofa at the time so no damage done.

 

[THXuk]

Is the general consensus on the blue hue and shine on the dial, that it is now close to gen?


Sent from my iPhone using Tapatalk

 

[buckkiller1]

These are all QC photos I got. The watch is on its way to me and I should receive it by end of day Tuesday. I can then further confirm it is all as per QC photos.View attachment 86965 View attachment 86966 View attachment 86967 View attachment 86968 View attachment 86969 View attachment 86970 View attachment 86971 View attachment 86972 View attachment 86973 View attachment 86974

stunning!! damn i want

 

[buckkiller1]

I've just received my 688 from TS. It's even better than in the photos. Absolutely perfect.
Well, almost... The strap is a pos, but I've known that already.

Sent from the RWI App

pm sent

 

[buckkiller1]

I noticed that the pics on TD are still of the V2
PA21768 - Pam688 S Luminor GMT 42mm V2 VSF 1:1 Blue Dial SS LT P9001
https://ts-station.cn/goods.php?ProId=21768

 

[Vicar69]

Is there a larger version of this watch out there?


Sent from my iPhone using RWI

 

[d4m.test]

Is there a larger version of this watch out there?


Sent from my iPhone using RWI

Unfortunately, there isn't. You could get Pam690 that is 47mm Radiomir.
There was a limited gem in 44mm released together with this one, but it was 10 day reserve and there is no rep for that model.

Sent from the RWI App

 

[d4m.test]

I’m still only seeing the V2 available and the TD I’ve contacted haven’t been able to provide anything on the slight variation you received. I’ll wait and see.

 

[machim]

You would need to wait for Pam 437 v2 with correct gmt function, basically is same as 441 but on blue dial 44mm


Sent from my iPhone using Tapatalk

 

[buckkiller1]

I received this message the other day

TSWatch MARK <[email protected]>
Oct 30 (5 days ago)

Dear friend,



Factory said it is lastest version with the smaller case lugs


Thanks




*mod edit : removed non-essential advertising link*


WATCH ORDERED!!

 

[pushpull]

Can someone please give a 100 % confirmation on buckle size? I would like to order a strap at the same time as I order watch. @piero980 says it's 22/22 & @michelesanctis says it's 22/20 - both apparently own the watch....

 

[piero980]

@pushpull
Original rep strap comes with the watch is 22/20 but if you don’t want to use the original buckle i suggest you to buy 22/22 strap with a new buckle. It looks absolutely better imo.


Inviato dal mio iPhone utilizzando RWI

 

[pushpull]

@pushpull
Original rep strap comes with the watch is 22/20 but if you don’t want to use the original buckle i suggest you to buy 22/22 strap with a new buckle. It looks absolutely better imo.


Inviato dal mio iPhone utilizzando RWI

thank you for clearing that up

 

[buckkiller1]

Yes definitely order a non tappered strap, they look much better on the wrist and you can use a much larger buckle.

Sent from my XT1650 using Tapatalk

 

[d4m.test]

I’m also interested in buying a new strap. I’ve never done this, so can someone let me know if I need a special tool to swap them out and where a good place to start shipping for straps would be.

 

[mysterio]

I’m also interested in buying a new strap. I’ve never done this, so can someone let me know if I need a special tool to swap them out and where a good place to start shipping for straps would be.

You must need a 1.6mm screwdriver. Any micro screwdriver set will have it. Or if you want you can buy a more specialized driver which has a specially shaped tip for Panerai watches.

http://www.panatime.com/scexoemcocue.html

You can also find some OEM ones on eBay for around $30-$50. As for straps, there is a thread on quality straps at budget prices to start you on your way. You can upgrade to the big guys later.

https://forum.replica-watch.info/threads/quality-straps-at-budget-prices.382141/