-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
PAM 111 Noob V3->V4, KW–V6Fac & H maker - (**QC pics checking**)
- Thread starter ALE7575
- Start date
Ok. I hope this time it works. Thank you @mysterio
I don't see anything wrong with your watch. It's good to go.
Is the non-functioning micrometer screw too short? Yes. Are you going to get a longer one if you return it to the factory? Most likely not. These things are made in batches (and huge batches at that). You want to go bother the TDs for that? Be my guest. I know a few people rejecting their PAM111s for that, and then getting samples with other issues like wobbly crowns, dials slightly askew, scratches on the case. AND still with the short micrometer screw.
I'm just offering my opinion. Best case, you'll get a marginally longer screw but still short of the dagger. Worst case, one "problem" becomes a real one or two.
Hope someone can help me in identifying. Thanks!
https://www.dropbox.com/s/n206e5efya..._8223.JPG?dl=0
https://www.dropbox.com/s/rd9wvskpmr..._8225.JPG?dl=0
https://www.dropbox.com/s/z6hg89411m..._8229.JPG?dl=0
https://www.dropbox.com/s/kwfvute9wb..._8231.JPG?dl=0
https://www.dropbox.com/s/e0n1jpv377..._7300.JPG?dl=0
Uploading the images doesn't work for me
. Trying with
, what's the deal here?
Btw, the pin on the crownguard looks odd or does it have something to do with light?
https://www.dropbox.com/s/n206e5efya..._8223.JPG?dl=0
https://www.dropbox.com/s/rd9wvskpmr..._8225.JPG?dl=0
https://www.dropbox.com/s/z6hg89411m..._8229.JPG?dl=0
https://www.dropbox.com/s/kwfvute9wb..._8231.JPG?dl=0
https://www.dropbox.com/s/e0n1jpv377..._7300.JPG?dl=0
Uploading the images doesn't work for me
. Trying with
Btw, the pin on the crownguard looks odd or does it have something to do with light?
Last edited:
Hi guys,
Getting my first PAM, not sure what to check. Please let me know if the QC pic looks good. Thanks guys.
Getting my first PAM, not sure what to check. Please let me know if the QC pic looks good. Thanks guys.
Hi guys,
Getting my first PAM, not sure what to check. Please let me know if the QC pic looks good. Thanks guys.
I don't see anything out of place.The PAM111 is a good choice for your first PAM.
Thanks for affirmative. Will give it a go.I don't see anything out of place.The PAM111 is a good choice for your first PAM.
Hey Guys! My first rep purchase from Intime, can someone help me figure out if this is good to go or not? Thanks!
https://imgur.com/gallery/zDf80rm
https://imgur.com/gallery/zDf80rm
Hey Guys! My first rep purchase from Intime, can someone help me figure out if this is good to go or not? Thanks!
https://imgur.com/gallery/zDf80rm
I don't see any issue with your watch. Tahor, I can't see your pictures.
No worries, as long as you got the watch you ordered.
By the way, a V4 movement will always have a Y-incabloc installed. That's standard now.
acozcan
Known Member
- 6/7/17
- 150
- 20
- 18
Hi again.
I received my watch and everything seems perfect but then I realized the movement ia not working.
I opened this subject.
https://forum.replica-watch.info/forum/panerai/6732653-pam111-noob-v4-movement-problem
also you can see the video that I have taken here;
https://youtu.be/zLCgstI-FrI
what can be the problem?
Like I posted in your thread,it's not very clear but it looks like the micrometric screw is missing. Which possibly might have gotten into the movement and got stuck somewhere.
Replied to you in another thread, im having same problem, the regulator screw fall off and stuck on balance wheel.