• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

Oyster Perpetual 41mm 124300 KING

HacknHand

Getting To Know The Place
10/3/22
51
38
18
I received today my QCs for the turquoise dial, it seems way too blue but case and bezel look ok, will probably install a buff dial and it should be a nice watch

Thanks for posting and I agree, despite the blue being somewhat off the rest looks great, including the bezel. Even if the bezel isn't perfect it seems very close to gen. I'd argue impossible to tell unless they're side-by-side.

I'm glad the bezel is an improvement compared to GMF fatboy. I havethe King on order also and I will swap in a gen dial. How do the hands look to the experts? 604 crown upgrade needed?

Hands look fine to me, not sure why you'd spend almost as much for a gen crown as you would for this entire watch, nobody would ever notice any difference.
 

bertieng

I'm Pretty Popular
26/11/18
1,258
481
83
The best OP41 is still from GSF, but unfortunately it seems that they don't produce it anymore.
 

bertieng

I'm Pretty Popular
26/11/18
1,258
481
83
The best OP41 is still from GSF, but unfortunately it seems that they don't produce it anymore.
 

johnlogan

Legendary Member
Certified
18/12/15
10,033
14,918
113
zgWqK2.jpg

zgWOMn.jpg

zgWmNt.jpg

zgWI1E.jpg

zgWyD3.jpg

zgW1os.jpg
 

johnlogan

Legendary Member
Certified
18/12/15
10,033
14,918
113
  • Like
Reactions: merowinger

PTwatchLover

Active Member
Certified
29/8/22
318
1,175
93
Portugal
Oh well... I'll have to unfollow this thread because I'm about to buy that silver King OP and I already have way to many watches! :)

Regarding the bezel thickness, I've been wondering about that too when looking at the pictures from the various rep factories and at photos of gens on the net. The gen's bezel, in pictures, sometimes seems fat and sometimes looks thin. I think it has to do with the way the light reflects on the rounded shiny bezel's surface. I took this photo last week at an AD and the bezel looks fat so that King looks ok. What do you think?


 
Last edited:

GrandmasterChime

Agent Provocateur
Certified
6/1/19
1,729
1,340
113
New Zealand
Oh well... I'll have to unfollow this thread because I'm about to buy that silver King OP and I already have way to many watches! :)

Regarding the bezel thickness, I've been wondering about that too when looking at the pictures from the various rep factories and at photos of gens on the net. The gen's bezel, in pictures, sometimes seems fat and sometimes looks thin. I think it has to do with the way the light reflects on the rounded shiny bezel's surface. I took this photo last week at an AD and the bezel looks fat so that King looks ok. What do you think?


I agree it seems to depend on the photo. I have a yellow Incoming. Was worth a look I figured
 

aHero

Watch Bro
Certified
27/5/22
3,620
5,033
113
I have a GMF v1 and EWF. The GMF v1 bezel is indeed fatter. It’s not just trickery of light and eyes. Hard to say about the King without seeing it in person.
 

merowinger

I'm Pretty Popular
10/7/13
1,457
1,395
113
Switzerland
regarding the bezel thickness:
I think the edge of the crystal reinforces the impression of a too fat bezel, in combination with the lighting/refelction.
Even the dial color will be different (hopefully better) on the tiffany dial in real life / daylight.
I'm sure the dark blue will also have a sunburst, which can not be seen on the QC-picture.
 

HacknHand

Getting To Know The Place
10/3/22
51
38
18
Yes, I'm starting to get excited about this release, all of the pics above look great (with the exception of the "Tiffany" colour - but although not close to gen, that one still looks good). Hands and bezel look great to me, silver sunburst looks fantastic.

Looking forward to seeing these once on wrists.