• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

NOOB Pepsi GMT 126710 BLRO mini review

lepetitamericain

This member is doing hard time, they pissed off the goat.
INMATE
6/3/19
88
66
0
Does anybody have experience if the movement accepts genuine hands?
 

MKTimer

Known Member
10/12/17
126
115
43
I’ve been holding out forever for the ARF release with clone movement and was close to the GMF, then Noob finally drops the Pepsi. Yes I know it’s overpriced, but I just had to have one.

The color? I think it’s close to the latest MK II bezel colors which are toned down a bit. I think Noob used MK II gen. I much prefer the WG and early MK 1 brighter colors. I can tell you the the blue and red transition a lot from indoor lighting to sunlight. The blue goes from Navy to a Royal Blue; the red from a burgundy to bright red. In the sun the blue and red come alive. The bezel fill is not white and has good contrast indoors. For me it’s the best Pepsi bezel yet.

I’ve had 5 Noob’s CHS Batman (and 42 EXP) and movement worked well for me, even daily wear (I always set the hour hand forward to set the date, not backwards). I hope to have the same luck here.

First thing to go is the 80s Jubilee bracelet. Yes it’s beautiful, but it makes this watch look busy IMO. For me the Pepsi bezel is the star on this model and the Oyster bracelet is perfect. Especially brushed. I borrowed my Sub bracelet...for now.

Anyway, some pics of course ????

69f8462813de5a1b299c04a6a8ebad66.jpg
ff8361123cd29d1b86adc1dd255299ed.jpg
3a7a09f976754dd12a6928c8b81d6014.jpg
691163cdbe85b67419ff8f816b155369.jpg
261b81a7e1a52ad0e914a0ed717dc104.jpg

Thanks for sharing the Awesome pics and insight into your watch.

I ordered mine almost unusually after reading this entire thread.

I can’t wait for it to arrive.

Cheers


Sent from my iPhone using Tapatalk
 

XLR8R

Renowned Member
16/8/18
692
355
63
Can’t wait for this BEAST! Gen dial and crystal. To follow. Then I’m done... maybe gen tube and crown too


Sent from my iPhone using Tapatalk

Same thing goes for me aswell when I finish my GMF CHS wrapped rootbeer franken with "VR3185" I'm gonna work on this one aswell.
 
  • Like
Reactions: m5smg2

CybNoX

Active Member
23/5/15
235
20
18
m5smg2 Thanks!

if I used it for LN sub build, would the serial number series be a giveaway?

I guess it would not take a 3135 movement eh

smoke

thanks again
 
Last edited:
  • Like
Reactions: m5smg2

m5smg2

Mythical Poster
Supporter
Certified
23/8/07
6,466
8,412
113
m5smg2 Thanks!

if I used it for LN sub build, would the serial number series be a giveaway?

I guess it would not take a 3135 movement eh

smoke

thanks again

Cheers. I dont think the SN is the giveaway if you’re building a Sub. Not sure but I think the Sub case has wider lugs than GMT....smoke and others would know better.
 

KJ2020

Time Traveler
Supporter
12/3/18
34,620
66,642
113
The bezel assy on a Sub is different. Four holes drilled into the case for springs and balls/click on the Sub are not there on GMT case. 24 clicks vs 120. Aside from that and the bracelet, the rep cases are pretty much identical. Also the crystal will sit higher on the GMT to accommodate the extra hand.
 
Last edited:

CybNoX

Active Member
23/5/15
235
20
18
Cheers. I dont think the SN is the giveaway if you’re building a Sub. Not sure but I think the Sub case has wider lugs than GMT....smoke and others would know better.

Thanks again, wear in good health. It’s a beauty!
 

CybNoX

Active Member
23/5/15
235
20
18
The bezel assy on a Sub is different. Four holes drilled into the case for springs and balls/click on the Sub are not there on GMT case. 24 clicks vs 120. Aside from that and the bracelet, the rep cases are pretty much identical. Also the crystal will sit higher on the GMT to accommodate the extra hand.


Ah.. thanks.
 
  • Like
Reactions: Mochahead

MKTimer

Known Member
10/12/17
126
115
43
Hi Members

Can any one let me know the part number for the Gen crystal to fit this watch?

Thanks in advance for your help


Sent from my iPhone using Tapatalk
 

nonox

Active Member
30/3/12
261
74
28
It’s a modified ETA clone so gen 3186 will not fit without modding.
Same problem for hands.
Dial will fit if you cut the feet.
 

grandphuba

Active Member
8/4/18
255
41
0
It’s a modified ETA clone so gen 3186 will not fit without modding.
Same problem for hands.
Dial will fit if you cut the feet.

So if the dial is modded by cutting/modifying the feet, and I also buy gen hands, I should be good to fit a gen movement, or will the crown/stem not align as well?
 

mari115

Respected Member
9/6/18
4,439
2,484
113
Nearer than you think
So if the dial is modded by cutting/modifying the feet, and I also buy gen hands, I should be good to fit a gen movement, or will the crown/stem not align as well?

i wouldn't waste that amount of money to either get a gen 3186 or this watch in particular. more than 600$ for a timebomb? wait for arf since they are making the clone movement
 

Hazing

And So It Begins... Again
9/5/19
5,185
4,441
113
m5smg2 Thanks!

if I used it for LN sub build, would the serial number series be a giveaway?

I guess it would not take a 3135 movement eh

smoke

thanks again

That’s crazy. Are you asking about using a gmt 3285 to try and build a Submariner? Why not just get a Submariner and save yourself...
 

Hazing

And So It Begins... Again
9/5/19
5,185
4,441
113
Wow. Order placed - I hope you’re getting commission from China !


Sent from my iPhone using Tapatalk
If it only worked that way. I've directed many many many many people to my dealer and would be lucky to get so much as a "thanks'.

Sent from my SM-G960U using Tapatalk
 
  • Like
Reactions: kennygconspiracy