So you understand, The bazel fell off, and need to reconnect it to the case again. The Retaining ring with the 3 points must be the connecting points, that keeps it together with the case?
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
Noob’s new GMT bezels are poorly designed
- Thread starter KJ2020
- Start date
- 13/6/15
- 2,412
- 1,772
- 113
Believe it or not..that rubber part. I made a how to on this....let me check for the link
- 13/6/15
- 2,412
- 1,772
- 113
- 13/6/15
- 2,412
- 1,772
- 113
I could not understand why I had to remove the top, stupid solution but was quite understandable after moving it.
Last edited:
- 12/3/18
- 34,659
- 66,749
- 113
For those whose bezel gasket (hytrel ring) is lost or not usable, this fishline diameter worked as is on one I repaired for someone else. No sanding needed as I had to do on my own watch.
- 12/3/18
- 34,659
- 66,749
- 113
Using fishline and anchoring it with double-sided tape so it can't lift up has worked as a permanent solution on multiple Noob Pepsi samples.
The double-sided tape then anchors the insert back in place.
The double-sided tape then anchors the insert back in place.
- 12/3/18
- 34,659
- 66,749
- 113
Here is another rep with the same bezel construction and the same solution applied.
forum.replica-watch.info
Kudos to @ward1991 for flawless execution
OMF DiW GMT Everose $500 paperweight
This watch was great until I sold it to a friend(one of the very times I've sold to someone I know) and of course the bezel came loose on him THE first night he has it. I gave him all the forewarnings, told him not to play with the bezel all the time etc etc and I believe he listened, just bad...
forum.replica-watch.info
Kudos to @ward1991 for flawless execution