• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

New AP 26240 with 4401 Super Clone movement is coming

Largemouthbass

Do not accept unsolicited offers
Patron
Certified
12/5/25
12
6
3
I have been excited to finally get my hands on one of these. I just ordered RG with green dial. It will be getting plated by flan
 

serumdiesel

Madman
17/3/21
725
630
93
Thank you, for stating my position clearly. I agree. Just about everything about these 26240's are next level. The slots in the bezel screws (I can accept the wiggle / gaps) are absolutely atrocious. Befitting reps of 15 years ago.

Thanks I'll grab some from Watch2Parts. Do the threads seem strong, as in, you can tighten (within reason) without likelihood of stripping?

Yes, the screws I received are of very high quality and strong. You will be impressed at how accurate and precise the machining is as soon as you put them in.

Again, bizarre that this is where APSF decided to shit the bed on these.
 

CrazyOCD.RepWearer

Active Member
Patron
Certified
12/8/11
370
170
43
CONUS
Yes, the screws I received are of very high quality and strong. You will be impressed at how accurate and precise the machining is as soon as you put them in.

Again, bizarre that this is where APSF decided to shit the bed on these.

Awesome, I can't wait. I also have a Deep crystal coming today, which I'll have to compare against Prof.
 
  • Like
Reactions: serumdiesel

Ah0rsey

18 hands high, bushy mane.
Patron
Certified
9/8/22
3,825
19,667
113
uk
Since you have both do you mind swapping bracelets between them to see if they fit? Really want ROC bracelet on my 15400.
just seen this sorry for not replying. Actually im in two minds whether to keep the chrono or the 400 but not both......

I do tend to prefer the clean lines of the 400. So I'm not going to remove the bracelets just yet incase I do something stupid and mark one of the cases before I sell. But I've measured with calipers and the distance between the plots and edges seems very close, I'd be surprised if they don't match although one thing I did notice was.....

the thickness of both bracelets does actually match closely the curved edges on the side of the cases. So putting the 400 bracelet onto the 26240 might mean it would be a little thicker and noticeable, and visa versa the thinner bracelet would be slimmer. That may change where the plots fit within the centre of the bracelet.... hope that makes sense. I'm sure someone in the previous 166 pages must have tried to swap them over?
 
  • Like
Reactions: munichman

CrazyOCD.RepWearer

Active Member
Patron
Certified
12/8/11
370
170
43
CONUS
Does anybody knows if the links from 15500/15510 from APSF fit on 26240 ?
Also does somebody is kind enough to mesure links for 26240 ? I will help checking for they can fit.
Having hard time to get extra links…
Thanks

So, this is a no go. The bracelets are different thicknesses. I believe the links themselves can be swapped between braclets, however the difference in thickness, flushness and fitment of the bracelet would be affected.

I swapped my crystal on the ASPF 15500 so decided to do some measuring and testing fitting. Images are medium sized to prevent littering peoples' screens too much (sorry). Click for higher resolution if it matters to you. Also, I used ugly lighting (direct multiple LED, single direction) to highlight any flaws, dust, details. Sorry.


26400 LEFT -- 15500 RIGHT

You can see the differences in bracelets between the 26400 and 15500 are differences in thickness.



As for plots, they seem same/similar.




Here are the measurements.

26400 First







15500 Next








Next up, bracelet swap-a-rama!

26400 fitment




26400 with 15500 bracelet




Issues with 15500 bracelet on 26400 - plots aren't flush. Otherwise fits and wearable.






15500 fitment




Issues with 15500 with 26240 bracelet. Cannot be mounted properly without redrilling 26240 plots.






15500 with 26240 fitment



Closer examination of the plot holes show they are different. Even the milling is different (At least for APSF. Unsure about GEN or other factories).



As for my little crystal swap, here's a comparison.

Stock APSF




Prof APSF




Anyway, I hope this was helpful to those interested / helpful to the community in some way. Prof tax for AR goodness, just in case!


 
Last edited: