-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
Nautilus date wheel project
- Thread starter Keylog74
- Start date
- 14/6/13
- 3,849
- 1,686
- 113
PP4Ever
Known Member
- 8/12/17
- 106
- 54
- 28
Since, there are some amount of DWO orders here and I think many of us are little to none of knowledge how to change/install the DWO.
At least we can tell our watch smith to do the job right.
is it possible for any experiences to show how to change/install in pictures/ video? Appreciate.
BTW,
At least we can tell our watch smith to do the job right.
is it possible for any experiences to show how to change/install in pictures/ video? Appreciate.
BTW,
my order #532 is on the way? Because I've not received any response back.
thank you.
Last edited:
mrsmith1
Getting To Know The Place
- 9/11/18
- 66
- 37
- 0
Your ordernumber is an earlier number than mine, I was told they would be shipped out this week, so yours should be included there.
There are plenty of youtube videos showing how to service/remove dial on the miyota movement. You would however need some special tools that are probably tripple the cost of sending it to a watchsmith.(Proper handremoval tool for one. Forget about those amazon watch-tool-kits, they are absolute trash)
- 14/3/18
- 2,023
- 1,112
- 113
- 14/6/13
- 3,849
- 1,686
- 113
- 14/6/13
- 3,849
- 1,686
- 113
I’ve opened the caseback and the stem, is there anyone know how to remove the movement metal ring out from the movement?
- 14/6/13
- 3,849
- 1,686
- 113
- 14/6/13
- 3,849
- 1,686
- 113
I’ve opened the caseback and the stem, is there anyone know how to remove the movement metal ring out from the movement?
try to acces from the front.
Ohhh do you mean I have to unscrew the front bezel and push the movement from the bottom to top?
- 14/6/13
- 3,849
- 1,686
- 113
Guys to install the DWO process is easy.
Nautilus PF
1- Unscrew the 4 scres on the side of the watch.
2- Remove besel and Crystal
3- Remove the hands.
4- Remove the Dial (wich is attached with double tape to the case not the movement)
5- replace the stock DWO with the NEW one.
On the BP & KMF Aquanaut the process is different.
1- Open case back
2- Remove Sterm
3- Take out the movement
4- Remove hands
5-Remove dial and install DWO
Nautilus PF
1- Unscrew the 4 scres on the side of the watch.
2- Remove besel and Crystal
3- Remove the hands.
4- Remove the Dial (wich is attached with double tape to the case not the movement)
5- replace the stock DWO with the NEW one.
On the BP & KMF Aquanaut the process is different.
1- Open case back
2- Remove Sterm
3- Take out the movement
4- Remove hands
5-Remove dial and install DWO
Last edited:
For step 4, how do I remove the dial from the movement? it seems like the dial is stick to the movement?
Oh apparently, there are two stickers sticking inside the dial, I’ve used two paper to stick into the dial and push the dial out
- 14/6/13
- 3,849
- 1,686
- 113