Mini Review of RXF's 116610LN

[Koric]

kennygconspiracy Are you familiar with prof xtals? How would you compare the RXF xtals to the prof black hole?

Also who can I buy a gen crystal from on this forum? Does viperb still exist on trf?

 

[1675Fanboy]

Late night RXF desk shot.


Sent from my iPhone using Tapatalk

 

[kennygconspiracy]

kennygconspiracy Are you familiar with prof xtals? How would you compare the RXF xtals to the prof black hole?

Also who can I buy a gen crystal from on this forum? Does viperb still exist on trf?

My 116710LN has a prof crystal. Side by side, they looked exactly the same to me, from edge to black to clarity.

Gen crystals are normally for sale in the parts section here on RWI You'll be sure to find them!

I know not of viperb, my apologies.

Sent from my ONEPLUS A6003 using Tapatalk

 

[Koric]

My 116710LN has a prof crystal. Side by side, they looked exactly the same to me, from edge to black to clarity.

Gen crystals are normally for sale in the parts section here on RWI You'll be sure to find them!

I know not of viperb, my apologies.

Sent from my ONEPLUS A6003 using Tapatalk

Wow, that is good to know that this xtal is the same as prof! Thank you!

 

[Koric]

My 116710LN has a prof crystal. Side by side, they looked exactly the same to me, from edge to black to clarity.

Gen crystals are normally for sale in the parts section here on RWI You'll be sure to find them!

I know not of viperb, my apologies.

Sent from my ONEPLUS A6003 using Tapatalk

Wow, that is good to know that this xtal is the same as prof! Thank you!

 

[Koric]

Do you still have your qc pictures? I think the RXF is perfect. I feel like we're getting baited and switched with the new VSF. I don't think it looks like the RXF at all.

 

[marco130]

A couple of early opinions. I’d read that some people had an issue with a stiff bracelet and needed an oil bath. I did not have that experience. Also the screws were not too tight to loosen and resize. One link off each side and the "factory" setting on the glidelock and it was perfectly sized for a 7 1/2" wrist.
I wore it for a couple of days and compared it to my V1 LV ARF which I felt was very comfortable and the difference was negligible.
‘I’m enjoying it.
And even with all the new versions that are hitting the market, I don’t regret picking this one. Great ootb.

 

[Tete]

Do you still have your qc pictures? I think the RXF is perfect. I feel like we're getting baited and switched with the new VSF. I don't think it looks like the RXF at all.

I have seen several videos already on youku and VSF is very similar in dial, bezel, crown ... to RXF, but the case of VSF is much more Gen than RXf. I would definitely go for VSF.

The V6F case is garbage. Very straight lugs on the front and unpolished cg all the way to the bezel.

 

[GingerBubba]

I have seen several videos already on youku and VSF is very similar in dial, bezel, crown ... to RXF, but the case of VSF is much more Gen than RXf. I would definitely go for VSF.
.

I understood they were using exactly the same case. Are you able to show the differences?

 

[d3s19n]

I understood they were using exactly the same case. Are you able to show the differences?

Well they house different movements so there’s that. And I know for sure the rehaut is better on the vsf. Then I saw a picture of an rxf clasp and didn’t remember it being soo sharp

Could be a mismatched photo? Vsf has nice rounded edges and this looks too square..

But RXF is the finest 2824 out there for sure regardless

 

[d3s19n]

Here’s the rehaut difference from RXF

Engraving is positioned top to bottom in the middle of the total rehaut with a small Lower wall.

Here is vsf where rehaut shifted upwards to incorporate a larger and more gen like lower wall, positioned equally between the top of the rehaut and the top of the lower wall (instead of the whole rehaut height like above)

Tried to find a gen pic but it’s funny a search for “rehaut” mostly yields replica discussions... we are the only ones who care!!

 

[heska]

Here’s the rehaut difference from RXF

Engraving is positioned top to bottom in the middle of the total rehaut with a small Lower wall.

Here is vsf where rehaut shifted upwards to incorporate a larger and more gen like lower wall, positioned equally between the top of the rehaut and the top of the lower wall (instead of the whole rehaut height like above)

Tried to find a gen pic but it’s funny a search for “rehaut” mostly yields replica discussions... we are the only ones who care!!

Case is definitely different, it also have the notch for 3135 movement:

symbole téléphone word

 

[Tete]

I understood they were using exactly the same case. Are you able to show the differences?

I will try to find good images, but when you see 1000 videos you can easily distinguish them, so far the case of VSF is the best without a doubt, waiting to see more images and some video of ZF. The bezels, dials and hands on VSF, RXF, V6F and ZF look very similar and quite good. For my V6F it has the worst case, it looks less refined and with a very different shape from gen.

 

[GingerBubba]

Thanks guys for your comparison photos and explanations - I'd never spot the rehaut difference without your help! :thumbsup:

 

[Kalev007]

Here’s the rehaut difference from RXF

Engraving is positioned top to bottom in the middle of the total rehaut with a small Lower wall.

Here is vsf where rehaut shifted upwards to incorporate a larger and more gen like lower wall, positioned equally between the top of the rehaut and the top of the lower wall (instead of the whole rehaut height like above)

Tried to find a gen pic but it’s funny a search for “rehaut” mostly yields replica discussions... we are the only ones who care!!

Here you go:

And thats how ZZF updated their rehaut as well on V3 (my late V2S as it as well):

 

[d3s19n]

[mention] Tete [/mention] yeah all the parts look suspiciously similar on all the new subs but I guess then you look for case shape to pick a winner...

Did you say you had an HBB V6F? They look great too! Care to share some pics? Thanks

 

[J84]

Here you go:

And thats how ZZF updated their rehaut as well on V3 (my late V2S as it as well):

Hi does zzf v3 have same dial as RXF?

 

[Tete]

[mention] Tete [/mention] yeah all the parts look suspiciously similar on all the new subs but I guess then you look for case shape to pick a winner...

Did you say you had an HBB V6F? They look great too! Care to share some pics? Thanks

no, I don't have V6F, I have only been able to see a lot of pictures and videos. VSF is definitely the best 116610ln, I would say its case is 90% similar to gen. Also the VSF bezel uses a brighter and more striking platinum paint.

 

[dla329]

here is mine, it looks nice


Does anyone has the VSF and RXF side by side?

trusty said, that the hands, bezel and bracelet are some of the improvements they have done on VSF.

another guy said that the datewindow of VSF is a little bigger.

to me both looks the same, but I can Juge Only from pics.

 

[qChella]

here is mine, it looks nice


Does anyone has the VSF and RXF side by side?

trusty said, that the hands, bezel and bracelet are some of the improvements they have done on VSF.

another guy said that the datewindow of VSF is a little bigger.

to me both looks the same, but I can Juge Only from pics.

Its funny how they say they upgraded tands on vsf however they look way thickers and I tink vsf hans are worse.