• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

GMF 2019 Batman 126710?

Nokia_3310

Nokia_3310

Getting To Know The Place
2/4/18
55
9
8
Applegang said:
My GMF QC Pictures are here - Note the bezel:
IMG-4839.jpg

IMG-4840.jpg

IMG-4841.jpg

IMG-4842.jpg

IMG-4843.jpg

IMG-4844.jpg

IMG-4845.jpg

IMG-4846.jpg

IMG-4847.jpg

IMG-5174.jpg
Click to expand...

Which TD is this one from?
 
Z

Zenrolex

Active Member
14/2/19
258
151
43
USA
KJ2020 I was thinking taking it a jeweler polish the both in and outer of the bracelet, what u think?
 
KJ2020

KJ2020

Time Traveler
Supporter
12/3/18
34,664
66,757
113
Zenrolex said:
KJ2020 I was thinking taking it a jeweler polish the both in and outer of the bracelet, what u think?
Click to expand...

It takes quite a lot of buffing to smooth down sharp rough cut edges. If you read my posts regarding the BP president bracelet, I spent at least 5 hours buffing those edges, and then had to rebrush the outer links. Hard to imagine any jeweler wanting to take that on, especially since its a counterfeit bracelet. Not trying to stir up concern, just mentioning what I and another member experienced. Also, I could see the rough cut inner links on another member's QC pics. More samples will give us a better analysis.
 
SWI

SWI

Known Member
1/11/17
181
80
28
Canada
I just ordered one on jubilee , if it’s really sharp I’ll throw it on an oyster with polished centre links. Have several from Noob and ARF so will play around when I get it.
 
  • Like
Reactions: KJ2020
Z

Zenrolex

Active Member
14/2/19
258
151
43
USA
KJ2020 said:
It takes quite a lot of buffing to smooth down sharp rough cut edges. If you read my posts regarding the BP president bracelet, I spent at least 5 hours buffing those edges, and then had to rebrush the outer links. Hard to imagine any jeweler wanting to take that on, especially since its a counterfeit bracelet. Not trying to stir up concern, just mentioning what I and another member experienced. Also, I could see the rough cut inner links on another member's QC pics. More samples will give us a better analysis.
Click to expand...

You're right that took the excitement level down a notch. I was thinking either use my small dremel or get a friend jeweler to polish the edges..throw on a prof xtal and call it a day.. thanks for sharing @KJ2020.. guess I keep reading a bit longer.
 
  • Like
Reactions: 3king and KJ2020
rcom440

rcom440

Respected Member
10/11/12
5,840
3,620
113
USA
KJ2020 said:
It takes quite a lot of buffing to smooth down sharp rough cut edges. If you read my posts regarding the BP president bracelet, I spent at least 5 hours buffing those edges, and then had to rebrush the outer links. Hard to imagine any jeweler wanting to take that on, especially since its a counterfeit bracelet. Not trying to stir up concern, just mentioning what I and another member experienced. Also, I could see the rough cut inner links on another member's QC pics. More samples will give us a better analysis.
Click to expand...


It’s a piece of cake for experienced jeweler. You don’t have to give entire watch, I’d take off clasp too.
my guy did WAY more complex project for me for less than $40.
To smooth edges and refinish jubilee bracelet would take him around 30min or even less.
 
KJ2020

KJ2020

Time Traveler
Supporter
12/3/18
34,664
66,757
113
rcom440 said:
It’s a piece of cake for experienced jeweler. You don’t have to give entire watch, I’d take off clasp too.
my guy did WAY more complex project for me for less than $40.
To smooth edges and refinish jubilee bracelet would take him around 30min or even less.
Click to expand...

It would be great if you could do that, I hope you can.
 
elmonch

elmonch

Getting To Know The Place
7/1/19
43
14
8
I'm about to buy the BLRO version of GMF, I got tired of waiting the clone movement.

Where dou you recommend to buy it? This will be my first rep and I'm kind of lost.
 
  • Like
Reactions: blehbleh215
blehbleh215

blehbleh215

Active Member
2/2/17
200
47
0
elmonch said:
I'm about to buy the BLRO version of GMF, I got tired of waiting the clone movement.

Where dou you recommend to buy it? This will be my first rep and I'm kind of lost.
Click to expand...

Having a correct movement, not necessarily means having the correct bezel color. Having a right bezel color is far more important
 
  • Like
Reactions: 3king and rcom440
Tobel

Tobel

Respected Member
6/7/17
5,456
3,673
113
elmonch said:
I checked their webpage but GMF BLRO is not listed.

Any other trusted dealer you recommend?
I see people having issues with Puretime and Intime, but I don't know if they stillar still reliable.

Thank you
Click to expand...

I use intime all the time. Ryan is my go to TD. Don't know what issues you are referring to. Same thing for Puretime, They're one of the biggest TD so you can't go wrong either way
 
P

Paradise1977

Active Member
6/12/16
343
26
28
elmonch said:
I checked their webpage but GMF BLRO is not listed.

Any other trusted dealer you recommend?
I see people having issues with Puretime and Intime, but I don't know if they stillar still reliable.

Thank you
Click to expand...

If you write to him in private he can find you all in a very short time


Inviato dal mio iPhone utilizzando Tapatalk
 
muiramas

muiramas

Aristocrat
18/1/17
5,977
7,763
113
Thread is short of pics - anyone else got theirs yet? Approved QC pics welcome.
 
Last edited:
You must log in or register to reply here.
Top Bottom