-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
Gen Daytona vs Noob V1-V2 and V2.2 Daytona vs ARF V2 Daytona
- Thread starter M Scott
- Start date
Bobi01
Respected Member
- 2/2/19
- 3,913
- 3,446
- 113
Arf v2 mate,removed deco plate,changed rotor and changed caseback,have noob v2 thin caseback
- 13/12/16
- 1,902
- 862
- 113
Did you buy the noob caseback from a td or m2m? When I bought my arf 116520 I didn’t like the caseback and I bought a gen one.. but it was expensive
Inviato dal mio iPhone utilizzando Tapatalk
You can thin both watches easily. ARF do what robi did, noob change the gasket and crystal for gen, maybe lower the hand stack and mod the case. Noob is the worst shape case but the rehaut is so much better.
I have a noob at 12.4, one at 12.6, I think I can get it to 12.2.
Sent from my iPhone using Tapatalk
I have a noob at 12.4, one at 12.6, I think I can get it to 12.2.
Sent from my iPhone using Tapatalk
masterpiece777
Renowned Member
You can thin both watches easily. ARF do what robi did, noob change the gasket and crystal for gen, maybe lower the hand stack and mod the case. Noob is the worst shape case but the rehaut is so much better.
I have a noob at 12.4, one at 12.6, I think I can get it to 12.2.
Sent from my iPhone using Tapatalk
What did work did you do on the 12.4 noob,and what on the one you get to 12.6?
Sent from the RWI App
- 1/8/17
- 1,885
- 701
- 113
Absolutely right. The ARF'S A/R being so light it gives a nice result specially on the black dial
Everything I said above. Hands tack ever so slightly lowered
12.4 with casework.
Case and caseback can be thinned
Sent from my iPhone using Tapatalk
But what is the REAL thickness of a gen daytona 116500 and 116520?
measured in which way?
because I can’t find any objective information, only rumors and “people” that said something about.
Last edited:
Bobi01
Respected Member
- 2/2/19
- 3,913
- 3,446
- 113
The only reputable info that I found is a publication that compares and measure in many parts some R models and the Daytona is reported 12.6mm, from crystal to caseback.
12.5 is plausible with tollerances, don’t know where 12.3 came out from other people
Hi guys bought mine last year, ARF v2 (correct me if I am wrong) and I like it but always see the inner subdials thinner than the gen, is there any dial better ? thanks!
Hi guys bought mine last year, ARF v2 (correct me if I am wrong) and I like it but always see the inner subdials thinner than the gen, is there any dial better ? thanks!
Hi guys bought mine last year, ARF v2 (correct me if I am wrong) and I like it but always see the inner subdials thinner than the gen, is there any dial better ? thanks!
Bobi01
Respected Member
- 2/2/19
- 3,913
- 3,446
- 113
Hi guys bought mine last year, ARF v2 (correct me if I am wrong) and I like it but always see the inner subdials thinner than the gen, is there any dial better ? thanks!
New arf v2 dials are corect as gen... also the pushers are shorter like gen,if you want buy again arf v2 and you will get new dial and pushers
thanks! but then mine is v1? and should I order simply a v2 or there are different v2 versions..
Bobi01
Respected Member
- 2/2/19
- 3,913
- 3,446
- 113
No yours is old v2... it is still v2 but arf recently changed subdial thickness and pushers,subdials are like gen and pushers are shorter like gen
Bobi01
Respected Member
- 2/2/19
- 3,913
- 3,446
- 113
Is that an ARF? Looks like the "fake" watch's chrono is working in that vid. ARF chrono is non-functional, right?