mistermagoo
Active Member
- 9/8/17
- 360
- 147
- 43
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
DAYTONA V3 CLEAN FACTORY 116500 BLACK
- Thread starter Mark1937
- Start date
michaelle1193
Active Member
- 15/1/20
- 434
- 234
- 43
michaelle1193
Active Member
- 15/1/20
- 434
- 234
- 43
- 16/2/16
- 1,179
- 586
- 113
Yes. But you should ask your TD or different TD's to see if they will supply for you.
the coronet is fixed now, check latest QCs.
TDs can supply v3 clean dial for $150
TDs can supply v3 clean dial for $150
Bobi01
Respected Member
- 2/2/19
- 3,913
- 3,446
- 113
Btf have better hands, they are more 3d and clean is too flat, best is gen
pic 1
pic 2
Wow. I just received my CF V3 and I can honestly say this is the first black ceramic daytona I can actually wear without the fear of being called out.
I have read many posts nitpicking details of the CF V3 compared to BTF, but in my opinion the gen like mattness of the subdial supersedes everything else because whoever put their eyes on the gen at least once have no choice but to immediately notice the rainbow-like shining subdials even from 2 meters away.
And by the way, my CF V3 had no coronet issue. It seems to be the problem for some of the initial batch of the watch.
But boy does CF xtal suck like hell. I completely agree with everyone on this point and would appreciate advice on cost efficient option to replace it.
pic 2
Wow. I just received my CF V3 and I can honestly say this is the first black ceramic daytona I can actually wear without the fear of being called out.
I have read many posts nitpicking details of the CF V3 compared to BTF, but in my opinion the gen like mattness of the subdial supersedes everything else because whoever put their eyes on the gen at least once have no choice but to immediately notice the rainbow-like shining subdials even from 2 meters away.
And by the way, my CF V3 had no coronet issue. It seems to be the problem for some of the initial batch of the watch.
But boy does CF xtal suck like hell. I completely agree with everyone on this point and would appreciate advice on cost efficient option to replace it.
agreed my friend, coronet issue was on the first batch and now fixed.. you can replace xtal with gen/deep/noob
michaelle1193
Active Member
- 15/1/20
- 434
- 234
- 43
- 25/3/21
- 840
- 638
- 93
Thats simply not true. I have a gen and have seen many out and about with the sub dials having a machined finish which refracts light as a rainbow. Dont be too transfixed on the latest dial releases, they are not even close to being what's manufactured by Rolex.
I dunno man - the CF is very, very, VERY close to gen on the dial & sub-dial front IMO. It's a slight shine on both, not the mirror effect of the BTF.Thats simply not true. I have a gen and have seen many out and about with the sub dials having a machined finish which refracts light as a rainbow. Dont be too transfixed on the latest dial releases, they are not even close to being what's manufactured by Rolex.
michaelle1193
Active Member
- 15/1/20
- 434
- 234
- 43
To me the suddials on the white panda is much better than the black version.The two extra rings on the subdials are to fattt. I think it’s a good rep watch, nobody can spot it when we wear them on our wrist. Only put the gen and rep together for comparison.
- 16/2/16
- 1,179
- 586
- 113
I was waiting for a response from BTF but they don't seem to release any new dial soon
muiramas
Aristocrat
- 18/1/17
- 5,977
- 7,762
- 113
Some bullshit doing the rounds again.
Here is a genuine 116500 LN with super shiny sub dials.
Here is a genuine 116500 LN with super shiny sub dials.
